component
W25Q32JWUUIQ
Public Made by Adomby adom
Winbond Elec NOR FLASH, USON-8(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# W25Q32JWUUIQ++**Winbond Elec** · NOR FLASH · USON-8(3x4)++W25Q32JWUUIQ from Winbond Elec, in a USON-8(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | /CS | input | Chip Select, active low to enable device and must transition from high to low after power-up before accepting new instructions. |+| 2 | DO (IO1) | bidirectional | Data Output in standard SPI mode on the falling edge of CLK, or Data Input/Output 1 in Dual and Quad SPI modes. |+| 3 | /WP (IO2) | bidirectional | Write Protect, active low for Status Register and memory array protection via Block Protect bits in standard mode, or Data Input/Output 2 in Quad SPI mode. |+| 4 | GND | power_in | Ground reference for device power supply. |+| 5 | DI (IO0) | bidirectional | Data Input in standard SPI mode on the rising edge of CLK for instructions, addresses or data, or Data Input/Output 0 in Dual and Quad SPI modes. |+| 6 | CLK | input | Serial Clock Input providing timing for serial input and output operations with maximum frequency of 133MHz for Quad I/O and Quad Output instructions. |+| 7 | /HOLD or /RESET (IO3) | bidirectional | Hold Input, active low to pause device operation in standard SPI mode; functions as Data Input/Output 3 in Quad SPI mode or as /RESET input in TFBGA packages requiring minimum pulse width of ~1µS. |+| 8 | VCC | power_in | Power Supply operating from 1.7V to 1.95V with standby current as low as 0.1µA in power-down mode. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Winbond Elec |+| Package | USON-8(3x4) |+| Category | Memory |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `W25Q32JWUUIQ`+- Footprint: `Package_SON:Winbond_USON-8-2EP_3x4mm_P0.8mm_EP0.2x0.8mm`+- 3D model: USON-8(3x4), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm nominal UFQFPN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `w25q32jwuuiq-etched.step` / `w25q32jwuuiq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `w25q32jwuuiq.step` / `w25q32jwuuiq.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Winbond Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904132803497984) (78 pp, sha256 `cc812bfef3cdaf83`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/w25q32jwuuiq-datasheet.pdf)
page.jsonadded+159@@ -0,0 +1,159 @@+{+ "slug": "w25q32jwuuiq",+ "version": "0.1.0",+ "type": "component",+ "description": "Winbond Elec NOR FLASH, USON-8(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "w25q32jwuuiq",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "w25q32jwuuiq.kicad_sym",+ "w25q32jwuuiq.kicad_mod",+ "w25q32jwuuiq.glb",+ "w25q32jwuuiq.step",+ "w25q32jwuuiq.lbr",+ "docs/hero.png",+ "docs/w25q32jwuuiq-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "W25Q32JWUUIQ",+ "manufacturer": "Winbond Elec",+ "package": "USON-8(3x4)",+ "pin_count": 9,+ "category": "Memory",+ "subcategory": "NOR FLASH",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904132803497984",+ "parts": {+ "symbol": "w25q32jwuuiq.kicad_sym",+ "footprint": "w25q32jwuuiq.kicad_mod",+ "model_3d": "w25q32jwuuiq-etched.glb",+ "model_3d_plain": "w25q32jwuuiq.glb",+ "model_3d_step": "w25q32jwuuiq-etched.step",+ "model_3d_step_plain": "w25q32jwuuiq.step",+ "lbr": "w25q32jwuuiq.lbr"+ },+ "distributor_links": {+ "lcsc": "C2760370"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T17:20:42Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "/CS",+ "type": "input",+ "description": "Chip Select, active low to enable device and must transition from high to low after power-up before accepting new instructions."+ },+ {+ "number": "2",+ "name": "DO (IO1)",+ "type": "bidirectional",+ "description": "Data Output in standard SPI mode on the falling edge of CLK, or Data Input/Output 1 in Dual and Quad SPI modes."+ },+ {+ "number": "3",+ "name": "/WP (IO2)",+ "type": "bidirectional",+ "description": "Write Protect, active low for Status Register and memory array protection via Block Protect bits in standard mode, or Data Input/Output 2 in Quad SPI mode."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for device power supply."+ },+ {+ "number": "5",+ "name": "DI (IO0)",+ "type": "bidirectional",+ "description": "Data Input in standard SPI mode on the rising edge of CLK for instructions, addresses or data, or Data Input/Output 0 in Dual and Quad SPI modes."+ },+ {+ "number": "6",+ "name": "CLK",+ "type": "input",+ "description": "Serial Clock Input providing timing for serial input and output operations with maximum frequency of 133MHz for Quad I/O and Quad Output instructions."+ },+ {+ "number": "7",+ "name": "/HOLD or /RESET (IO3)",+ "type": "bidirectional",+ "description": "Hold Input, active low to pause device operation in standard SPI mode; functions as Data Input/Output 3 in Quad SPI mode or as /RESET input in TFBGA packages requiring minimum pulse width of ~1µS."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Power Supply operating from 1.7V to 1.95V with standby current as low as 0.1µA in power-down mode."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 78,+ "cost_usd": 0.4651,+ "at": "2026-10-01T17:20:22"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904132803497984",+ "pages": 78,+ "sha256": "cc812bfef3cdaf83",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}