W25Q256JVFIQ

{
 "schema": "adom.pads/1",
 "slug": "w25q256jvfiq",
 "footprint": "SOIC-16_3.9x9.9mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -4.445
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c"
 },
 "pad_count": 16,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "/HOLD or /RESET (IO3)",
   "type": "bidirectional",
   "description": "Multi-function pin. In Standard/Dual SPI acts as active-low /HOLD (pauses device while /CS is low; DO goes hi-Z and DI/CLK ignored). In Quad SPI (QE=1) becomes bidirectional data line IO3. On -IQ ordering variants (this MPN) /HOLD is disabled and QE=1 is fixed.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VCC",
   "type": "power_in",
   "description": "Power supply pin. Operating range 2.7 V to 3.6 V. /CS input must track VCC at power-up and power-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "/RESET",
   "type": "input",
   "description": "Dedicated active-low hardware reset input. Driving it low for a minimum of ~1 µs terminates any external or internal operation and returns the device to its power-on state. If unused, can be left floating or tied to VCC.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "NC",
   "type": "unconnected",
   "description": "No connect. Leave floating.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "NC",
   "type": "unconnected",
   "description": "No connect. Leave floating.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "NC",
   "type": "unconnected",
   "description": "No connect. Leave floating.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "/CS",
   "type": "input",
   "description": "Active-low SPI chip select input. When high, device is deselected and DO/IOx are high impedance (standby). Driving low selects the device for instructions. Must transition high-to-low before each new instruction and track VCC at power-up/down; an external pull-up is recommended.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "DO (IO1)",
   "type": "bidirectional",
   "description": "Serial Data Output in Standard SPI (unidirectional, updated on falling edge of CLK). In Dual/Quad SPI becomes bidirectional data line IO1.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "/WP (IO2)",
   "type": "bidirectional",
   "description": "Active-low Write Protect input in Standard/Dual SPI; when used with the CMP, SEC, TB, BP0-BP2 and SRP bits, prevents Status Register or memory-array writes. In Quad SPI (QE=1) becomes bidirectional data line IO2.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground return.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "NC",
   "type": "unconnected",
   "description": "No connect. Leave floating.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "NC",
   "type": "unconnected",
   "description": "No connect. Leave floating.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "NC",
   "type": "unconnected",
   "description": "No connect. Leave floating.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "NC",
   "type": "unconnected",
   "description": "No connect. Leave floating.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "DI (IO0)",
   "type": "bidirectional",
   "description": "Serial Data Input in Standard SPI (unidirectional, sampled on rising edge of CLK for instructions, addresses, and program data). In Dual/Quad SPI becomes bidirectional data line IO0.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "CLK",
   "type": "input",
   "description": "SPI Serial Clock input providing timing for serial input and output operations. Supports up to 133 MHz.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}