main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers w25q20clsnig: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray
w25q20clsnig-etched.glb Publish 0.1.0 · Ray
w25q20clsnig-etched.step w25q20clsnig: factory component page (tier=lcsc) · Ray
w25q20clsnig-hero.glb w25q20clsnig: hero GLB from the etched model (keeps the MPN mark) · Ray
w25q20clsnig-hero.overlay.json Publish 0.1.0 · Ray
w25q20clsnig.glb Publish 0.1.0 · Ray
w25q20clsnig.kicad_mod Publish 0.1.0 · Ray
w25q20clsnig.kicad_sym Publish 0.1.0 · Ray
w25q20clsnig.lbr Publish 0.1.0 · Ray
w25q20clsnig.step Publish 0.1.0 · Ray

W25Q20CLSNIG

Winbond Elec · NOR FLASH · SOIC-8

W25Q20CLSNIG from Winbond Elec, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /CS input Chip Select input that enables and disables the device; when high the device is deselected and the data pins are high impedance, and /CS must transition high to low before a new instruction is accepted.
2 DO (IO1) bidirectional Data Output in standard SPI (read on falling edge of CLK) and Data Input/Output 1 in Dual and Quad SPI instructions.
3 /WP (IO2) bidirectional Active-low Write Protect input that prevents the Status Register from being written, and becomes Data Input/Output 2 when the QE bit is set for Quad SPI.
4 GND power_in Ground.
5 DI (IO0) bidirectional Data Input in standard SPI (written on rising edge of CLK) and Data Input/Output 0 in Dual and Quad SPI instructions.
6 CLK input Serial Clock input that provides the timing for serial input and output operations.
7 /HOLD (IO3) bidirectional Active-low Hold input that pauses the device while /CS is low, and becomes Data Input/Output 3 when the QE bit is set for Quad SPI.
8 VCC power_in Power supply pin; the device operates from a single 2.3V to 3.6V supply.

Key specifications

Parameter Value
Manufacturer Winbond Elec
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (low-speed range) VCC 2.3 2.7 V FR = 80MHz, fR = 33MHz 52
Supply Voltage (high-speed range) VCC 2.7 3.6 V FR = 104MHz, fR = 50MHz 52
Ambient Temperature, Operating TA -40 85 °C Industrial 52
Supply Voltage VCC -0.6 V -0.6 to VCC+0.6 52
Voltage Applied to Any Pin VIO -0.6 V Relative to Ground; -0.6 to VCC+0.4 52
Transient Voltage on any Pin VIOT -2 V <20nS Transient, Relative to Ground; -2.0V to VCC+2.0V 52
Storage Temperature TSTG -65 150 °C 52
Electrostatic Discharge Voltage VESD -2000 2000 V Human Body Model 52
VCC (min) to /CS Low tVSL 10 µs Characterized only 53
Time Delay Before Write Instruction tPUW 5 ms Characterized only 53
Write Inhibit Threshold Voltage VWI 1 2 V Characterized only 53
Input Capacitance CIN 6 pF VIN = 0V 54
Output Capacitance Cout 8 pF VOUT = 0V 54
Input Leakage ILI -2 2 µA 54
I/O Leakage ILO -2 2 µA 54
Standby Current ICC1 10 50 µA /CS = VCC, VIN = GND or VCC 54
Power-down Current ICC2 1 5 µA /CS = VCC, VIN = GND or VCC 54
Current Write Status Register Icc4 8 12 mA /CS = VCC 54
Current Page Program Icc5 10 15 mA /CS = VCC 54
Current Sector/Block Erase Icc6 10 15 mA /CS = VCC 54
Current Chip Erase Icc7 10 15 mA /CS = VCC 54
Output Low Voltage Vol 0.2 V Iol = 100 µA 54
Clock frequency, all instructions except Read Data (03h) FR 0 104 MHz 2.3V-3.6V VCC & Industrial Temperature 56
Clock frequency, all instructions except Read Data (03h) FR 0 80 MHz 2.3V-2.7V VCC & Industrial Temperature 56
Clock frequency, Read Data (03h) fR 0 50 MHz 2.7V-3.6V VCC & Industrial Temperature 56
Clock frequency, Read Data (03h) fR 0 33 MHz 2.3V-2.7V VCC & Industrial Temperature 56
Clock High, Low Time, all instructions except Read Data (03h) tCLH1, tCLL1 4 ns 56
Clock High, Low Time for Read Data (03h) tCRLH, tCRLL 8 ns 56
/CS Active Setup Time relative to CLK tSLCH 5 ns 56
Data In Setup Time tDVCH 2 ns 56
Data In Hold Time tCHDX 5 ns 56
/CS Deselect Time (Array Read to Array Read) tSHSL1 50 ns 56
/CS Deselect Time (Erase/Program to Read SR) tSHSL2 100 ns 56
Output Disable Time tSHQZ 7 ns 56
Clock Low to Output Valid tCLQV1 8 ns 56
Clock Low to Output Valid (Read ID instructions) tCLQV2 8 ns 56
Output Hold Time tCLQX 0 ns 57
/HOLD Active Setup Time relative to CLK tHLCH 5 ns 57
/HOLD to Output Low-Z tHHQX 7 ns 57
/HOLD to Output High-Z tHLQZ 12 ns 57
Write Protect Setup Time Before /CS Low tWHSL 20 ns 57
Write Protect Hold Time After /CS High tSHWL 100 ns 57
/CS High to Power-down Mode tDP 3 µs 57
/CS High to Standby Mode without ID Read tRES1 3 µs 57
/CS High to Standby Mode with ID Read tRES2 1.8 µs 57
/CS High to next Instruction after Suspend tSUS 20 µs 57
Write Status Register Time tW 10 15 ms 57
Byte Program Time (First Byte) tBP1 15 30 µs 57
Additional Byte Program Time (After First Byte) tBP2 2.5 5 µs 57
Page Program Time tPP 0.4 0.8 ms 57
Sector Erase Time (4KB) tSE 30 300 ms 57
Block Erase Time (32KB) tBE1 120 800 ms 57
Block Erase Time (64KB) tBE2 150 1000 ms 57
Chip Erase Time tce 0.5 2 s W25Q20CL 57

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 10.1 8-Pin SOIC 150-mil (Package Code SN)...................................................................... 59 10.2 8-Pin VSOP8 150-mil (Package Code SV)........................................... 3

CAD (KiCad official)

  • Symbol: W25Q20CLSNIG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: w25q20clsnig-etched.step / w25q20clsnig-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); w25q20clsnig.step / w25q20clsnig.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Winbond Elec datasheet (66 pp, sha256 385a836f7bfa1444, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF