component
W25Q16JV 16Mbit SPI Flash
Public Made by Adomby adom
16 Mbit (2 MB) serial NOR flash with Standard/Dual/Quad SPI up to 133 MHz.
← Commit history
page.json+122−8@@ -1,8 +1,11 @@ {+ "schema_version": 1,+ "type": "component", "slug": "w25q16",+ "title": "W25Q16JV 16Mbit SPI Flash",+ "brief": "16 Mbit (2 MB) serial NOR flash with Standard/Dual/Quad SPI up to 133 MHz.", "version": "0.1.0",- "type": "component",- "description": "16 Mbit (2 MB) serial NOR flash with Standard/Dual/Quad SPI up to 133 MHz.",+ "license": "CC-BY-SA-4.0", "tags": [ "flash", "spi",@@ -12,6 +15,122 @@ "winbond", "soic-8" ],+ "component": {+ "mpn": "W25Q16JV",+ "manufacturer": "Winbond",+ "package": "SOIC-8 (208 mil)",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "SPI NOR Flash",+ "datasheet": "https://www.winbond.com/resource-files/w25q16jv%20spi%20revd%2008122016.pdf",+ "parts": {+ "symbol": "w25q16.kicad_sym",+ "footprint": "w25q16.kicad_mod",+ "model_3d": "w25q16.glb"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "/CS",+ "type": "input",+ "description": "Chip Select input (active low). When /CS is high the device is deselected and DO/IOx are high-impedance; when brought low the device is selected and instructions can be issued. A pull-up resistor on /CS is recommended to hold it high during power-up."+ },+ {+ "number": "2",+ "name": "DO/IO1",+ "type": "bidirectional",+ "description": "Serial Data Output (Standard SPI); becomes bidirectional IO1 in Dual/Quad SPI mode. Data is shifted out on the falling edge of CLK."+ },+ {+ "number": "3",+ "name": "IO2",+ "type": "bidirectional",+ "description": "Data Input/Output 2, used only for Quad SPI instructions. In Standard/Dual SPI mode this pin may be used as /WP (write protect) depending on QE status register bit."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0V) for the device."+ },+ {+ "number": "5",+ "name": "DI/IO0",+ "type": "bidirectional",+ "description": "Serial Data Input (Standard SPI); becomes bidirectional IO0 in Dual/Quad SPI mode. Instructions, addresses and data are shifted in on the rising edge of CLK."+ },+ {+ "number": "6",+ "name": "CLK",+ "type": "input",+ "description": "SPI Serial Clock Input. Provides the timing reference for all serial input/output operations. Supports up to 133MHz."+ },+ {+ "number": "7",+ "name": "IO3",+ "type": "bidirectional",+ "description": "Data Input/Output 3, used only for Quad SPI instructions. In Standard/Dual SPI mode this pin may be used as /HOLD or /RESET depending on the QE status register bit."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply, 2.7V to 3.6V. Recommended decoupling: 100nF ceramic close to the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.winbond.com/resource-files/w25q16jv%20spi%20revd%2008122016.pdf",+ "pages": 74,+ "sha256": "97430b7ae9fc3758",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Density": "16 Mbit (2 MB)",+ "Interface": "SPI: Standard / Dual / Quad",+ "Max clock": "133 MHz (Quad up to 532 MHz equivalent)",+ "Page size": "256 bytes",+ "Sector / block": "4 KB sector, 32 KB / 64 KB block",+ "Supply voltage": "2.7 V to 3.6 V",+ "Endurance": "100,000 erase/program cycles",+ "Operating temperature": "-40 C to 85 C"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "SPI flash",+ "QSPI NOR",+ "firmware storage",+ "code shadow memory",+ "2MB flash"+ ],+ "discovery_pitch": "A 16 Mbit QSPI NOR flash for firmware, fonts, or data storage next to almost any MCU.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -27,10 +146,5 @@ "docs/w25q16-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }