main
Ray w25q128fvsig: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 35bf09d
{
  "slug": "w25q128fvsig",
  "version": "0.1.0",
  "type": "component",
  "description": "Winbond Elec NOR FLASH, SOIC-8-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "w25q128fvsig",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "w25q128fvsig.kicad_sym",
    "w25q128fvsig.kicad_mod",
    "w25q128fvsig.glb",
    "w25q128fvsig.step",
    "w25q128fvsig.lbr",
    "docs/hero.png",
    "docs/w25q128fvsig-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "W25Q128FVSIG",
    "manufacturer": "Winbond Elec",
    "package": "SOIC-8-208mil",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784871087742976",
    "parts": {
      "symbol": "w25q128fvsig.kicad_sym",
      "footprint": "w25q128fvsig.kicad_mod",
      "model_3d": "w25q128fvsig-etched.glb",
      "model_3d_plain": "w25q128fvsig.glb",
      "model_3d_step": "w25q128fvsig-etched.step",
      "model_3d_step_plain": "w25q128fvsig.step",
      "lbr": "w25q128fvsig.lbr"
    },
    "distributor_links": {
      "lcsc": "C571265"
    },
    "pins": [
      {
        "number": "1",
        "name": "/CS",
        "type": "input",
        "description": "Chip Select Input - active low control signal; device is selected for operation when /CS is low, deselected when high with serial data output pins in high impedance state."
      },
      {
        "number": "2",
        "name": "DO (IO1)",
        "type": "bidirectional",
        "description": "Data Output / Data Input Output 1 - serial data output in standard SPI mode on falling edge of CLK; becomes bidirectional IO1 pin in Dual/Quad SPI modes when used for address or data I/O."
      },
      {
        "number": "3",
        "name": "/WP (IO2)",
        "type": "bidirectional",
        "description": "Write Protect Input / Data Input Output 2 - active low hardware write protect input that prevents Status Register writes in standard and Dual SPI operation; becomes IO2 pin in Quad SPI when QE bit is set."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground - power supply ground connection for 128M-bit serial flash memory."
      },
      {
        "number": "5",
        "name": "DI (IO0)",
        "type": "bidirectional",
        "description": "Data Input / Data Input Output 0 - serial data input in standard SPI mode sampled on rising edge of CLK for instructions, addresses, and data; becomes bidirectional IO0 pin in Dual/Quad SPI modes."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "Serial Clock Input - timing clock for serial input and output operations; supports DC to 104 MHz frequency for Fast Read and Quad instructions, DC to 50 MHz for Read Data (03h) instruction."
      },
      {
        "number": "7",
        "name": "/HOLD or /RESET (IO3)",
        "type": "bidirectional",
        "description": "Hold or Reset Input / Data Input Output 3 - in Standard/Dual SPI with QE=0, active low hold input pauses device operation or reset input requires ≥1 µs low pulse; becomes IO3 pin in Quad SPI when QE bit is set."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power Supply - supply voltage input operating range 2.7V to 3.6V required for device operation with active current 4 mA typical and standby current 10-50 µA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 99,
        "cost_usd": 0.5248,
        "at": "2026-09-22T03:36:17"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784871087742976",
        "pages": 99,
        "sha256": "828506b99e659636",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "w25q128fvsig.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "w25q128fvsig-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "440a9cde014d80ab0c4c91b310321c7b75b2b9c3bca9f5fcabcf15623a843367",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}