component

W25Q128FV

Public Made by Adom

by adom

Winbond 128 Mbit (16 MB) 3 V serial NOR flash, SOIC-8. Standard/Dual/Quad SPI, 104 MHz, 4 KB sectors. Datasheet-verified.

componentmemoryflashnor-flashspiquad-spisoic-8winbond
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
Name Last commit message Last updated
docs w25q128: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers cross-highlight symbol + footprint viewers · Ray
package.json Publish 0.1.0 · Ray
page.json w25q128: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md w25q128: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
w25q128-etched.fit.json w25q128: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
w25q128-etched.glb w25q128: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
w25q128-etched.step w25q128: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
w25q128.glb Publish 0.1.0 · Ray
w25q128.kicad_mod Publish 0.1.0 · Ray
w25q128.kicad_sym Publish 0.1.0 · Ray
w25q128.lbr add validated EAGLE .lbr (Fusion library) · Ray
w25q128.step add .step (Fusion 3D source) · Ray
W25Q128FV.adom-lbr.json W25Q128FV: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray
W25Q128FV.lbr W25Q128FV: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray

W25Q128FV

Winbond · 128 Mbit SPI NOR flash · SOIC-8 (208 mil)

A 128 Mbit (16 MB) serial NOR flash from the Winbond W25Q family, in the wide SOIC-8, the go-to external storage for firmware, fonts, logs, and file systems. It speaks Standard, Dual, and Quad SPI plus QPI, clocking to 104 MHz (up to a 416 MHz-equivalent throughput in Quad), and organizes the array in uniform 4 KB sectors for fine-grained erase. The six SPI pins (CS, CLK, DI/IO0, DO/IO1, WP/IO2, HOLD/IO3) double as the four data lines in Quad mode. Runs from a single 2.7-3.6 V supply.

Pinout

Pin Name Type Function
1 /CS input Chip Select input (active LOW). Enables the device for SPI/QPI transactions; when HIGH, DO/IO pins are high-impedance and the device is deselected.
2 DO (IO1) bidirectional Serial Data Output in Standard SPI (MISO). Bidirectional IO1 in Dual/Quad SPI and QPI modes carrying data in both directions on shared bus lines.
3 /WP (IO2) bidirectional Write Protect input (active LOW) in Standard/Dual SPI - protects the Status Register from being written. Reused as IO2 in Quad SPI/QPI modes when Quad Enable (QE) bit is set.
4 GND power_in Ground reference (0V).
5 DI (IO0) bidirectional Serial Data Input in Standard SPI (MOSI) - clocked in on CLK rising edge. Bidirectional IO0 in Dual/Quad SPI and QPI modes.
6 CLK input Serial Clock input. Provides the timing for serial input and output; up to 104MHz operation.
7 /HOLD or /RESET (IO3) bidirectional Hold input (active LOW) pauses serial communication without deselecting the device, or Reset input (active LOW) depending on Status Register HOLD/RST bit. Reused as IO3 in Quad SPI/QPI modes when QE=1.
8 VCC power_in Power supply, 2.7V to 3.6V. Active current typically 4mA; power-down current <1uA.

Key specifications

Parameter Value
Type Serial NOR flash memory
Density 128 Mbit (16 MB)
Interface Standard / Dual / Quad SPI + QPI
Max clock 104 MHz (416 MHz equiv. Quad)
Erase granularity 4 KB sector (uniform)
Endurance 100k erase/program cycles
Supply voltage 2.7-3.6 V
Package SOIC-8 (208 mil)

Ordering variants

Same part, different packaging or reel option.

  • W25Q128FVSIG (SOIC-8, 208 mil)
  • W25Q128FVSSIG (SOIC-8)

CAD (KiCad official)

  • Symbol: Memory_Flash:W25Q128JVS
  • Footprint: Package_SO:SOIC-8_5.3x5.3mm_P1.27mm
  • 3D model: SOIC-8 208 mil (KiCad packages3D)
  • 3D model files: w25q128-etched.step / w25q128-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); w25q128.step / w25q128.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Winbond datasheet (100 pp, sha256 c545e2594435d1a1, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF