component
VX932X
Public Made by Adomby adom
VIBRATION RF Transceiver ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownVX932X
VIBRATION · RF Transceiver ICs · SOP-8
VX932X from VIBRATION, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | U-RX | input | UART serial input used to configure the chip; each command is a 7-byte frame starting with 0xF7, selecting transparent mode (0xA0) or filter mode (0xA5). |
| 2 | VDD | power_in | Power supply input rated 2.2 - 5.5 V. |
| 3 | GND | power_in | Ground. |
| 4 | LED | output | Indicator output that flashes when a received RF signal meets the matching conditions. |
| 5 | DIN | input | RF data input for 1527-like encoded signals with code width 100us < 1T < 1000us. |
| 6 | CS | output | Chip-select output used only by the Vx932S SPI variant. |
| 7 | DATA | output | Data output carrying NEC, UART or SPI data depending on the suffix; held high when no data is being output for NEC and UART. |
| 8 | CLK | output | Clock output used only by the Vx932S SPI variant; held low when the interface is idle. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VIBRATION |
| Package | SOP-8 |
| Category | Radio Frequency Chip/Antenna |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 5.5 | V | 4 | ||
| Interface voltage | VIN | -0.3 | V | VDD + 0.3 V upper limit | 4 | ||
| Junction temperature | TJ | -40 | 125 | ℃ | 4 | ||
| Storage temperature | TSTG | -50 | 150 | ℃ | 4 | ||
| Soldering temperature | TSDR | 255 | ℃ | duration not exceeding 30 s | 4 | ||
| ESD rating, human body model (HBM) | -4 | 4 | kV | HBM | 4 | ||
| Latch-up current | -100 | 100 | mA | @ 85 ℃ | 4 | ||
| Operating supply voltage | VDD | 2.2 | 5.5 | V | -40℃ to +85℃ | 4 | |
| Operating temperature | TOP | -40 | 85 | ℃ | 4 | ||
| Supply voltage slope | VSL | 1 | mV/us | 4 | |||
| Operating current | IDD | 0.5 | mA | 5 | |||
| Output source current | 5 | mA | 5 | ||||
| Output sink current | 5 | mA | 5 | ||||
| DIN code width range | T | 100 | 2000 | us | 5 | ||
| DIN data rate | Rate | 0.5 | 10 | kbps | 5 |
CAD (KiCad official)
- Symbol:
VX932X - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
vx932x-etched.step/vx932x-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vx932x.step/vx932x.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: VIBRATION datasheet (10 pp, sha256
6eb302ec5f5b0bd7, retrieved 2026-11-04, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).