Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

VS-60CPQ150-N3

Vishay Intertech · Schottky Diodes · TO-247AC

VS-60CPQ150-N3 from Vishay Intertech, in a TO-247AC. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Anode passive Anode of one Schottky leg of the common-cathode center-tap rectifier, rated 30 A per leg (IF(AV)) at a 150 V reverse voltage (VR).
2 Common cathode passive Common cathode shared by both Schottky legs, rated 2 x 30 A per leg and 150 V VR, with the base (tab) tied to this node per the block diagram.
3 Anode passive Anode of the second Schottky leg of the common-cathode center-tap rectifier, rated 30 A per leg (IF(AV)) at a 150 V reverse voltage (VR).

Key specifications

Parameter Value
Manufacturer Vishay Intertech
Package TO-247AC
Category Diodes
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum forward voltage drop per leg, 30 A, TJ = 25 °C VFM 0.8 0.83 V 30 A, TJ = 25 °C; see fig. 1; pulse width < 300 μs, duty cycle < 2 % 2
Maximum forward voltage drop per leg, 60 A, TJ = 25 °C VFM 0.93 0.99 V 60 A, TJ = 25 °C; see fig. 1; pulse width < 300 μs, duty cycle < 2 % 2
Maximum forward voltage drop per leg, 30 A, TJ = 125 °C VFM 0.64 0.67 V 30 A, TJ = 125 °C; see fig. 1; pulse width < 300 μs, duty cycle < 2 % 2
Maximum forward voltage drop per leg, 60 A, TJ = 125 °C VFM 0.74 0.77 V 60 A, TJ = 125 °C; see fig. 1; pulse width < 300 μs, duty cycle < 2 % 2
Maximum reverse leakage current per leg, TJ = 25 °C IRM 10 100 μA TJ = 25 °C, VR = Rated VR; see fig. 2 2
Maximum reverse leakage current per leg, TJ = 125 °C IRM 12 25 mA TJ = 125 °C, VR = Rated VR; see fig. 2 2
Typical junction capacitance per leg CT 820 pF VR = 5 VDC, test signal range 100 kHz to 1 MHz, 25 °C 2
Typical series inductance per leg LS 7.5 nH Measured lead to lead 5 mm from package body 2
Maximum voltage rate of change dV/dt 10000 V/μs Rated VR 2
Maximum DC reverse voltage VR 150 V Voltage ratings table, VS-60CPQ150-N3 1
Maximum working peak reverse voltage (VRRM rating) VRRM 150 V Major ratings and characteristics 1
Maximum average forward current per leg IF(AV) 30 A 50 % duty cycle at TC = 151 °C, rectangular waveform; see fig. 5 1
Maximum average forward current per device IF(AV) 60 A 50 % duty cycle at TC = 151 °C, rectangular waveform; see fig. 5 1
Maximum peak one cycle non-repetitive surge current per leg, 5 μs sine or 3 μs rect. pulse IFSM 2300 A Following any rated load condition and with rated VRRM applied; see fig. 7 1
Maximum peak one cycle non-repetitive surge current per leg, 10 ms sine or 6 ms rect. pulse IFSM 510 A Following any rated load condition and with rated VRRM applied; see fig. 7 1
Non-repetitive avalanche energy per leg EAS 0.5 mJ TJ = 25 °C, IAS = 1 A, L = 1 mH 1
Repetitive avalanche current per leg IAR 1 A Current decaying linearly to zero in 1 μs; frequency limited by TJ maximum; VA = 1.5 x VR 1
Maximum junction and storage temperature range TJ, TStg -55 175 °C 2
Maximum thermal resistance, junction to case per leg RthJC 0.8 °C/W DC operation; see fig. 4 2
Maximum thermal resistance, junction to case per package RthJC 0.4 °C/W DC operation 2
Typical thermal resistance, case to heatsink RthCS 0.25 °C/W Mounting surface, smooth and greased 2

CAD (KiCad official)

  • Symbol: VS-60CPQ150-N3
  • Footprint: Package_TO_SOT_THT:TO-247-3_Vertical
  • 3D model: TO-247AC (KiCad packages3D, STEP)
  • 3D model files: vs-60cpq150-n3-etched.step / vs-60cpq150-n3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vs-60cpq150-n3.step / vs-60cpq150-n3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Vishay Intertech datasheet (7 pp, sha256 4bcdfe2e9df7150b, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF