component
VRH4801NTX
Public Made by Adomby adom
AnaSem Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C698019). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+26−6
page.json+6−4@@ -26,13 +26,15 @@ "model_3d_step": "vrh4801ntx.step", "lbr": "vrh4801ntx.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C698019"+ }, "pins": [ { "number": "1", "name": "VIN", "type": "power_in",- "description": "Voltage input. Operating range 1.6V to 6.0V (absolute max -0.3V to +7.0V). Decouple to VSS with a ≥1.0µF ceramic capacitor close to the pin."+ "description": "Voltage input. Operating range 1.6V to 6.0V (absolute max -0.3V to +7.0V). Decouple to VSS with a \u22651.0\u00b5F ceramic capacitor close to the pin." }, { "number": "2",@@ -44,7 +46,7 @@ "number": "3", "name": "EN", "type": "input",- "description": "Chip enable (On/Off). VENH ≥ 1.2V enables the regulator; VENL ≤ 0.3V disables it and triggers CL auto-discharge (RDIS typ. 160Ω). EN input current ≈0.25~5µA at VEN=VIN=5V. Do not leave floating."+ "description": "Chip enable (On/Off). VENH \u2265 1.2V enables the regulator; VENL \u2264 0.3V disables it and triggers CL auto-discharge (RDIS typ. 160\u03a9). EN input current \u22480.25~5\u00b5A at VEN=VIN=5V. Do not leave floating." }, { "number": "4",@@ -56,7 +58,7 @@ "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated output, factory-trimmed to 4.80V ±1% (Iout=30mA). Maximum output current 250mA, current limit typ. 300mA. Requires a ≥1.0µF ceramic output capacitor (CL) to VSS for phase compensation. Must not exceed VIN+0.3V to avoid parasitic-diode conduction into VIN."+ "description": "Regulated output, factory-trimmed to 4.80V \u00b11% (Iout=30mA). Maximum output current 250mA, current limit typ. 300mA. Requires a \u22651.0\u00b5F ceramic output capacitor (CL) to VSS for phase compensation. Must not exceed VIN+0.3V to avoid parasitic-diode conduction into VIN." } ], "provenance": {
vrh4801ntx.lbr+20−2@@ -59,6 +59,18 @@ <smd name="3" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="VRH4801NTX">@@ -100,7 +112,13 @@ <connect gate="G$1" pin="VOUT" pad="5"/> <connect gate="G$1" pin="NC" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="VRH4801NTX" constant="no"/>+ <attribute name="MANUFACTURER" value="AnaSem" constant="no"/>+ <attribute name="LCSC_PN" value="C698019" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>