Generated by kicad-footprint-generator · KiCad file format 20260206
VRH3201NTX
AnaSem · Linear Voltage Regulators (LDO) · SOT-23-5
VRH3201NTX from AnaSem, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage input; operating voltage range is 1.6V to 6.0V (absolute maximum -0.3V to +7.0V). |
| 2 | VSS | power_in | Power ground. |
| 3 | EN | input | Chip enable; EN=VSS turns the output off and discharges CL through the internal auto-discharge switch. |
| 4 | NC | unconnected | Non connection (open). |
| 5 | VOUT | power_out | Regulated output, 1.95V to 5.0V for the N version with ±1% accuracy, 250mA maximum output current, and 300mA limit current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AnaSem |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 0.99 | 1.01 | ×VOUT | VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C, VOUT≧1.95V | 6 | |
| Dropout voltage | VDROP | 90 | 137 | mV | IOUT=100mA, 2.9V≦VOUT≦3.45V | 6 | |
| Output current | IOUT | 250 | mA | VIN≧VOUT+1.0V, 2.9V≦VOUT≦3.45V | 6 | ||
| Current consumption | IDD | 25 | 40 | µA | VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA | 7 | |
| Standby current | ISTB | 0.01 | 0.1 | µA | EN=VSS | 7 | |
| Input voltage | VIN | 1.6 | 6 | V | 7 | ||
| Load regulation | ΔVOUT | 10 | 40 | mV | VIN=VOUT+1.0V, IOUT=0.1mA ~ 100mA | 7 | |
| Line regulation | ΔVOUT/ΔVIN•VOUT | 0.01 | 0.1 | %/V | VOUT+1.0V≦VIN≦6.0V, IOUT=30mA | 7 | |
| Limit current | ILIMIT | 300 | mA | EN=VIN | 7 | ||
| EN high level voltage | VENH | 1.2 | 6 | V | 7 | ||
| EN low level voltage | VENL | 0.3 | V | 7 | |||
| EN high level current | IENH | 0.25 | 5 | µA | VEN=VIN=5V | 7 | |
| EN low level current | IENL | -0.1 | 0.1 | µA | VEN=VSS | 7 | |
| Input voltage | VIN | -0.3 | 7 | V | 5 | ||
| Output current | IOUT | 500 | mA | 5 | |||
| Output voltage range | VOUT | -0.3 | 0.3 | V | VSS -0.3 ~ VIN +0.3 (min relative to VSS, max relative to VIN) | 5 | |
| Power dissipation SOT-25 | PD | 600 | mW | PCB 50mm×50mm×1.6mm | 5 | ||
| Operating temperature range | TOPR | -40 | 85 | °C | 5 | ||
| Storage temperature range | TSTG | -55 | 125 | °C | 5 | ||
| Ripple rejection | Rr | 75 | dB | VIN=VOUT+1.0V, f=1KHz, ΔVRIP=0.5VP-P, IOUT=30mA | 7 | ||
| Short circuit current | ISHORT | 40 | mA | VIN=VOUT+1.0V, VOUT=0V | 7 | ||
| Output voltage temperature coefficient | ΔVOUT/ΔTa•VOUT | 20 | ppm/°C | VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C | 7 | ||
| CL auto-discharge resistance | RDIS | 160 | Ω | VIN=6.0V, VOUT=4.0V, VEN=VSS | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
VRH3201NTX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
vrh3201ntx-etched.step/vrh3201ntx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vrh3201ntx.step/vrh3201ntx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AnaSem datasheet (35 pp, sha256
b9bb74b00e80c8df, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).