main
Ray
Publish 0.1.0
9a28229
VRD1330MTX
AnaSem · Linear Voltage Regulators (LDO) · SOT-23-6
VRD1330MTX from AnaSem, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN1 | input | 1-Channel enable input: the VOUT1 regulator is shut down when EN1 is at VSS (level must be at most 0.3V low) and enabled when high (1.2V to 6.0V), with CL auto-discharge through 160Ω in shutdown. |
| 2 | VIN | power_in | Voltage input shared by both regulators, operating range 1.6V to 6.0V (absolute maximum -0.3V to +7.0V), with a at-least 1.0µF capacitor recommended between VIN and VSS. |
| 3 | EN2 | input | 2-Channel enable input: the VOUT2 regulator is shut down when EN2 is at VSS (level must be at most 0.3V low) and enabled when high (1.2V to 6.0V), with CL auto-discharge through 160Ω in shutdown. |
| 4 | VOUT2 | power_out | 2-Channel regulated output, which must not exceed VIN+0.3V, with a at-least 1.0µF ceramic output capacitor recommended between VOUT and VSS as close as possible. |
| 5 | VSS | power_in | Power ground, the common return for VIN, both outputs and both enable inputs. |
| 6 | VOUT1 | power_out | 1-Channel regulated output, which must not exceed VIN+0.3V, with a at-least 1.0µF ceramic output capacitor recommended between VOUT and VSS as close as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AnaSem |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy, Ch-1 (VOUT1 = 1.30V) | VOUT | -20 | 20 | mV | VOUT≦1.90V; VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C | 7 | |
| Output voltage accuracy, Ch-2 (VOUT2 = 3.00V) | VOUT | -1 | 1 | % | VOUT≧1.95V (printed as VOUT×0.99 / VOUT×1.01); VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C | 7 | |
| Dropout voltage, Ch-1 (VOUT1 = 1.30V) | VDROP | 210 | 340 | mV | IOUT=100mA; 1.2V≦VOUT≦1.65V | 7 | |
| Dropout voltage, Ch-2 (VOUT2 = 3.00V) | VDROP | 90 | 137 | mV | IOUT=100mA; 2.9V≦VOUT≦3.45V | 7 | |
| Current consumption | IDD | 50 | 80 | µA | VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA | 8 | |
| Standby current | ISTB | 0.01 | 0.1 | µA | EN=VSS | 8 | |
| Input voltage | VIN | 1.6 | 6 | V | 8 | ||
| Load regulation | ∆VOUT | 10 | 40 | mV | VIN=VOUT+1.0V, IOUT=0.1mA~100mA | 8 | |
| Line regulation | ∆VOUT / ∆VIN•VOUT | 0.01 | 0.1 | %/V | VOUT+1.0V≦VIN≦6.0V, IOUT=30mA | 8 | |
| Limit current | ILIMIT | 300 | mA | EN=VIN | 8 | ||
| Output voltage temperature coefficient | ∆VOUT / ∆Ta•VOUT | -20 | 20 | ppm/°C | VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C | 8 | |
| EN high level voltage | VENH | 1.2 | 6 | V | 8 | ||
| EN low level voltage | VENL | 0.3 | V | 8 | |||
| EN high level current | IENH | -0.1 | 0.1 | µA | VEN=VIN | 8 | |
| EN low level current | IENL | -0.1 | 0.1 | µA | VEN=VSS | 8 | |
| Input voltage range (absolute maximum) | VIN | -0.3 | 7 | V | 6 | ||
| Output current (absolute maximum) | IOUT | 500 | mA | 6 | |||
| Output voltage range (absolute maximum) | VOUT | -0.3 | 0.3 | V | Printed as VSS -0.3 ~ VIN +0.3 V; min is relative to VSS, max is relative to VIN | 6 | |
| Power dissipation, SOT-26 | PD | 600 | mW | SOT-26 package; power dissipation depends on board mounting, PCB 50mm×50mm×1.6mm | 6 | ||
| Operating temperature range | TOPR | -40 | 85 | °C | 6 | ||
| Storage temperature range | TSTG | -55 | 125 | °C | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
VRD1330MTX - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
vrd1330mtx-etched.step/vrd1330mtx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vrd1330mtx.step/vrd1330mtx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AnaSem datasheet (35 pp, sha256
8a7839f60b52e53b, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# VRD1330MTX
**AnaSem** · Linear Voltage Regulators (LDO) · SOT-23-6
VRD1330MTX from AnaSem, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN1 | input | 1-Channel enable input: the VOUT1 regulator is shut down when EN1 is at VSS (level must be at most 0.3V low) and enabled when high (1.2V to 6.0V), with CL auto-discharge through 160Ω in shutdown. |
| 2 | VIN | power_in | Voltage input shared by both regulators, operating range 1.6V to 6.0V (absolute maximum -0.3V to +7.0V), with a at-least 1.0µF capacitor recommended between VIN and VSS. |
| 3 | EN2 | input | 2-Channel enable input: the VOUT2 regulator is shut down when EN2 is at VSS (level must be at most 0.3V low) and enabled when high (1.2V to 6.0V), with CL auto-discharge through 160Ω in shutdown. |
| 4 | VOUT2 | power_out | 2-Channel regulated output, which must not exceed VIN+0.3V, with a at-least 1.0µF ceramic output capacitor recommended between VOUT and VSS as close as possible. |
| 5 | VSS | power_in | Power ground, the common return for VIN, both outputs and both enable inputs. |
| 6 | VOUT1 | power_out | 1-Channel regulated output, which must not exceed VIN+0.3V, with a at-least 1.0µF ceramic output capacitor recommended between VOUT and VSS as close as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AnaSem |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy, Ch-1 (VOUT1 = 1.30V) | VOUT | -20 | | 20 | mV | VOUT≦1.90V; VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C | 7 |
| Output voltage accuracy, Ch-2 (VOUT2 = 3.00V) | VOUT | -1 | | 1 | % | VOUT≧1.95V (printed as VOUT×0.99 / VOUT×1.01); VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C | 7 |
| Dropout voltage, Ch-1 (VOUT1 = 1.30V) | VDROP | | 210 | 340 | mV | IOUT=100mA; 1.2V≦VOUT≦1.65V | 7 |
| Dropout voltage, Ch-2 (VOUT2 = 3.00V) | VDROP | | 90 | 137 | mV | IOUT=100mA; 2.9V≦VOUT≦3.45V | 7 |
| Current consumption | IDD | | 50 | 80 | µA | VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA | 8 |
| Standby current | ISTB | | 0.01 | 0.1 | µA | EN=VSS | 8 |
| Input voltage | VIN | 1.6 | | 6 | V | | 8 |
| Load regulation | ∆VOUT | | 10 | 40 | mV | VIN=VOUT+1.0V, IOUT=0.1mA~100mA | 8 |
| Line regulation | ∆VOUT / ∆VIN•VOUT | | 0.01 | 0.1 | %/V | VOUT+1.0V≦VIN≦6.0V, IOUT=30mA | 8 |
| Limit current | ILIMIT | 300 | | | mA | EN=VIN | 8 |
| Output voltage temperature coefficient | ∆VOUT / ∆Ta•VOUT | -20 | | 20 | ppm/°C | VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C | 8 |
| EN high level voltage | VENH | 1.2 | | 6 | V | | 8 |
| EN low level voltage | VENL | | | 0.3 | V | | 8 |
| EN high level current | IENH | -0.1 | | 0.1 | µA | VEN=VIN | 8 |
| EN low level current | IENL | -0.1 | | 0.1 | µA | VEN=VSS | 8 |
| Input voltage range (absolute maximum) | VIN | -0.3 | | 7 | V | | 6 |
| Output current (absolute maximum) | IOUT | | | 500 | mA | | 6 |
| Output voltage range (absolute maximum) | VOUT | -0.3 | | 0.3 | V | Printed as VSS -0.3 ~ VIN +0.3 V; min is relative to VSS, max is relative to VIN | 6 |
| Power dissipation, SOT-26 | PD | | | 600 | mW | SOT-26 package; power dissipation depends on board mounting, PCB 50mm×50mm×1.6mm | 6 |
| Operating temperature range | TOPR | -40 | | 85 | °C | | 6 |
| Storage temperature range | TSTG | -55 | | 125 | °C | | 6 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `VRD1330MTX`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `vrd1330mtx-etched.step` / `vrd1330mtx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `vrd1330mtx.step` / `vrd1330mtx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [AnaSem datasheet](docs/vrd1330mtx-datasheet.pdf) (35 pp, sha256 `8a7839f60b52e53b`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/vrd1330mtx-datasheet.pdf)