VPC2845

{
  "slug": "vpc2845",
  "version": "0.1.0",
  "type": "component",
  "description": "VPSC DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "vpc2845",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "vpc2845.kicad_sym",
    "vpc2845.kicad_mod",
    "vpc2845.glb",
    "vpc2845.step",
    "vpc2845.lbr",
    "docs/hero.png",
    "docs/vpc2845-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "vpc2845-hero.glb",
    "vpc2845-hero.overlay.json",
    "vpc2845-etched.glb"
  ],
  "component": {
    "mpn": "VPC2845",
    "manufacturer": "VPSC",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603007631728926720",
    "parts": {
      "symbol": "vpc2845.kicad_sym",
      "footprint": "vpc2845.kicad_mod",
      "model_3d": "vpc2845-hero.glb",
      "model_3d_plain": "vpc2845-etched.glb",
      "model_3d_step": "vpc2845-etched.step",
      "model_3d_step_plain": "vpc2845.step",
      "lbr": "vpc2845.lbr"
    },
    "distributor_links": {
      "lcsc": "C7470590"
    },
    "distributor_check": {
      "checked_at": "2026-10-15T05:49:29Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier compensation pin: external compensation components connect here to shape the error amplifier output, and the amplifier is internally current-limited so forcing COMP to GND gives zero duty cycle."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the internal error amplifier used for the voltage feedback loop, where the FB lead should be kept short and stray capacitance minimized for stability."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Primary-side current sense input to the PWM comparator that terminates OUT conduction, with a typical comparator threshold VCS_th of 1 V and an optional voltage ramp for voltage-mode operation."
      },
      {
        "number": "4",
        "name": "RT/CT",
        "type": "passive",
        "description": "Oscillator timing pin: timing resistor RT connects from VREF and timing capacitor CT connects to GND, giving fOSC = 1.6/(RT x CT), and RT must not be less than 5 kΩ."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Analog and signal ground, which also serves as power ground on packages without a separate PGND; keep the signal return path separate from the high-current gate-driver return path."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Push-pull gate drive output for the external MOSFET that sources and sinks up to 1 A peak and is held low while VDD is below the turn-on threshold."
      },
      {
        "number": "7",
        "name": "VDD",
        "type": "power_in",
        "description": "Controller bias supply input, which should stay below the 28 V maximum recommended operating voltage (30 V absolute maximum) and be bypassed with a typical 0.1 µF capacitor placed directly at the pin."
      },
      {
        "number": "8",
        "name": "VREF",
        "type": "power_out",
        "description": "5 V reference output that requires a minimum 0.1 µF ceramic bypass capacitor placed as close to the pin as possible, with an additional bypass capacitor needed if other external loads are connected."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one SOP8 pin table for the whole VPCx84x family. The VPC2845 is covered by it, a; The datasheet does not give electrical pin types. Types were assigned by inference: COMP as output ("
        ],
        "pages_sent": 15,
        "cost_usd": 0.0811,
        "at": "2026-10-15T05:49:15"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603007631728926720",
        "pages": 15,
        "sha256": "a3f0b7c9be78a5be",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "vpc2845.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "vpc2845-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "34953143474da4eec9c4d621ca5a7757227e147ef52911c9b86c0fae55d22ede",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}