main
History Download
Ray Publish 0.1.0 5daaabe

VP3481MSG10-B

VIVA(昱盛) · IC · MSOP-10

VP3481MSG10-B from VIVA(昱盛), in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ISEN input Current sense input: an external resistor in series with ground sets the current limit, which activates when the ISEN-to-ground voltage exceeds VSC (200 mV typ at VIN=12V, 160 to 350 mV over temperature), with an absolute range of -0.4 to 0.6 V.
2 UVLO input Under-voltage lockout input compared with an internal 1.43 V reference; an external R1/R2 divider sets the enable threshold, and the 4.5 µA UVLO source current creates the hysteresis to the disable threshold, with an absolute range of -0.3 to 6 V.
3 COMP input Error amplifier output for loop compensation with an RC or RC/C network, with the COMP pin voltage typically 1 V at VFB = 1.275 V and an absolute range of -0.3 to 6 V.
4 FB input Output feedback input that is regulated to the internal 1.275 V reference (1.236 to 1.313 V over temperature) through an external divider from the output, and overvoltage protection triggers when FB rises to VFB + VOVP.
5 AGND power_in Analog ground, which the datasheet says to connect to the exposed pad.
6 FADJ input Frequency adjust, synchronization and shutdown pin: a resistor to ground sets the switching frequency from 100 kHz to 1 MHz, an external clock synchronizes the controller, and holding the pin high for 30 µs or more shuts the device down to about 5 µA supply current, with an absolute range of -0.3 to 6 V.
7 PVSS power_in Power ground for the gate driver, which the datasheet says to connect to the exposed pad.
8 GATE output Gate drive output for the external low-side N-channel MOSFET, with maximum swing equal to VIN below 5.8 V and 5.2 V at VIN of 5.8 V or higher, and an absolute range of -0.3 to 6 V.
9 VREG power_out Internal drive supply output that requires a 0.47 µF to 4.7 µF ceramic bypass capacitor to ground, and must not be driven by an external voltage (absolute range -0.3 to 6 V).
10 IN power_in Power supply input with an operating range of 2.97 V to 40 V and an absolute maximum of 42 V.

Key specifications

Parameter Value
Manufacturer VIVA(昱盛)
Package MSOP-10
Category
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VIN -0.3 42 V 3
Low voltage range (COMP/UVLO/FB/FADJ/GATE) VLV -0.3 6 V 3
Regulator output pin range VCC(VREG) -0.3 6 V 3
Current sense pin range VISEN -0.4 0.6 V 3
Junction temperature MAX TJMAX 150 oC 3
Storage temperature range TSTG -65 150 oC 3
Electrostatic discharge, Human body model 2 kV 3
Electrostatic discharge, Machine model 200 V 3
Supply voltage VIN 2.97 40 V 3
Switching frequency range fOSC 0.1 1 MHz 3
Operating junction range TJ -40 125 oC 3
Feedback voltage VFB 1.236 1.313 V VCOMP=1.4V, 3V<VIN<40V, -40℃<TJ<125℃ 4
Under voltage lockout, ramp down VUVLO 1.345 1.517 V Ramp down 4
UVLO Shutdown voltage VUVLOSD 0.55 0.7 0.82 V 4
Oscillation frequency fOSC 0.125 0.2 MHz RFADJ=150kΩ, -40℃<TJ<125℃ 4
Voltage load regulation ΔVLOAD -0.5 0.5 %/A IEAO Source/Sink 4
Current sense threshold voltage VSENSE 120 200 mV VIN=12V, -40℃<TJ<125℃ 4
Overload current limit sense voltage VSC 160 350 mV VIN=12V, -40℃<TJ<125℃ 4
Output overvoltage protection VOVP 26 85 135 mV VCOMP=1.4V 5
Output overvoltage protection hysteresis VOVP(HYS) 28 70 106 mV VCOMP=1.4V 5
Error amplifier output current (Source) IEAO 470 950 μA Source, VCOMP = 1.4V, VFB = 0V, -40℃<TJ<125℃ 5
Error amplifier output current (Sink) IEAO 30 105 μA Sink, VCOMP = 1.4V, VFB = 1.4V, -40℃<TJ<125℃ 5
Error amplifier output voltage, Upper Limit VEAO 2.4 2.95 V Upper Limit: VFB=0V, COMP pin floating -40℃<TJ<125℃ 5
Error amplifier output voltage, Lower Limit VEAO 0.32 0.9 V Lower Limit: VFB=1.4V, -40℃<TJ<125℃ 5
Soft start delay tSS 8.7 15 21.3 ms VFB = 1.2V, COMP pin floating 5
Maximum duty cycle DMAX 85 % RFADJ=150kΩ 4
Maximum GATE driving swing VGATE 5.2 V VIN≥5.8V 4
Quiescent current in shutdown mode IQ 15 μA VFADJ=3V, VIN=12V, -40℃<TJ<125℃ 4
Quiescent current in shutdown mode IQ 10 μA VFADJ=3V, VIN=5V, -40℃<TJ<125℃ 4
Supply Current ISUPPLY 5 mA RFADJ=150kΩ, -40℃<TJ<125℃ 4
Shutdown signal threshold on FADJ pin, Output=High Level (SD) VSD 1.4 V Output=High Level (SD), -40℃<TJ<125℃ 5
Shutdown signal threshold on FADJ pin, Output=Low Level (EN) VSD 0.4 V Output=Low Level (EN), -40℃<TJ<125℃ 5
Feedback voltage VFB 1.275 V VCOMP=1.4V, 3V<VIN<40V 4
Quiescent current in shutdown mode IQ 10 μA VFADJ=3V, VIN=12V 4
Quiescent current in shutdown mode IQ 5 μA VFADJ=3V, VIN=5V 4
UVLO source current IUVLO 4.5 μA Enabled 4
COMP pin voltage VCOMP 1 V VFB=1.275V 4
High-side switch RDS(ON) RDS(ON) 4 Ω VIN=5V, IGATE=0.2A 4
Low-side switch RDS(ON) RDS(ON) 2 Ω VIN=5V, IGATE=0.2A 4
Error amplifier voltage gain AVOL 60 V/V VCOMP=1.4V, IEAO=100μA 4
Oscillation frequency fOSC 0.146 MHz RFADJ=150kΩ 4
Minimum on-time tMIN(ON) 571 nS 4
Supply Current ISUPPLY 3.3 mA RFADJ=150kΩ 4
Current sense threshold voltage VSENSE 160 mV VIN=12V 4
Overload current limit sense voltage VSC 200 mV VIN=12V 4
Error amplifier output current (Source) IEAO 650 μA Source, VCOMP = 1.4V, VFB = 0V 5
Error amplifier output current (Sink) IEAO 57 μA Sink, VCOMP = 1.4V, VFB = 1.4V 5
Error amplifier output voltage, Upper Limit VEAO 2.65 V Upper Limit: VFB=0V, COMP pin floating 5
Error amplifier output voltage, Lower Limit VEAO 0.65 V Lower Limit: VFB=1.4V 5
Shutdown signal threshold on FADJ pin, Output=High Level (SD) VSD 1.26 V Output=High Level (SD) 5
Shutdown signal threshold on FADJ pin, Output=Low Level (EN) VSD 0.63 V Output=Low Level (EN) 5
GATE pin rising time tR 18 ns Cgs = 3000pF, VGATE = 0V to 3V 5
GATE pin falling time tF 12 ns Cgs = 3000pF, VGATE = 3V to 0V 5
Thermal shutdown TSD 175 ℃ 5
Thermal resistance (Junction to Case (top)) θJC(top) 46 oC/W 3
Thermal resistance (Junction to Air) θJA 147 oC/W 3
Thermal resistance (Junction to Board) θJB 81 oC/W 3
Junction-to-top characterization parameter ψJT 3 oC/W 3
Junction-to-board characterization parameter ψJB 77 oC/W 3

CAD (KiCad official)

  • Symbol: VP3481MSG10-B
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: vp3481msg10-b-etched.step / vp3481msg10-b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vp3481msg10-b.step / vp3481msg10-b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: VIVA(昱盛) datasheet (19 pp, sha256 69b9eb6438e41cbe, retrieved 2026-11-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF