main
Ray
vo3120: README says the maker 3D model was not used and why (it does not fit the maker drawing)
843118a
VO3120
Vishay's own 3D model was not used: it measures 5.59 mm across the body, outside the datasheet's E1 of 6.645 ± 0.165 mm, so the model here is generated from the datasheet drawing.
Vishay Intertech · Digital Isolators · DIP-8
VO3120 from Vishay Intertech, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the datasheet notes pins 1 and 4 need to be connected to LED common in the CMR test circuit. |
| 2 | A | passive | LED anode; input forward current of 7 mA to 16 mA turns the output on (absolute maximum 25 mA). |
| 3 | C | passive | LED cathode; the LED is off with input voltage of -3 V to 0.8 V and reverse voltage is limited to 5 V. |
| 4 | NC | unconnected | No internal connection; the datasheet notes pins 1 and 4 need to be connected to LED common in the CMR test circuit. |
| 5 | VEE | power_in | Negative supply / output ground reference; VCC - VEE operates from 15 V to 32 V (absolute maximum 35 V). |
| 6 | VO | output | Gate-drive output stage pin with 2.5 A minimum peak output current, tied to pin 7 in the output stage. |
| 7 | VO | output | Gate-drive output stage pin with 2.5 A minimum peak output current, tied to pin 6 in the output stage. |
| 8 | VCC | power_in | Positive output supply; VCC - VEE operates from 15 V to 32 V (absolute maximum 35 V) with UVLO turn-on at 13.5 V max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | DIP-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC - VEE | 15 | 32 | V | 2 | ||
| Input LED current (on) | IF | 7 | 16 | mA | 2 | ||
| Input voltage (off) | VF(OFF) | -3 | 0.8 | V | 2 | ||
| Operating temperature | Tamb | -40 | 110 | °C | 2 | ||
| Input forward current | IF | 25 | mA | 2 | |||
| Peak transient input current | IF(TRAN) | 1 | A | < 1 μs pulse width, 300 pps | 2 | ||
| Reverse input voltage | VR | 5 | V | 2 | |||
| Output power dissipation (listed under INPUT) | Pdiss | 45 | mW | 2 | |||
| High peak output current | IOH(PEAK) | 2.5 | A | Max pulse width 10 μs, max duty cycle 0.2 % | 2 | ||
| Low peak output current | IOL(PEAK) | 2.5 | A | Max pulse width 10 μs, max duty cycle 0.2 % | 2 | ||
| Supply voltage | VCC - VEE | 0 | 35 | V | 2 | ||
| Output voltage | VO(PEAK) | 0 | V | Printed as 0 to + VCC (upper limit is VCC, not a number) | 2 | ||
| Output power dissipation (listed under OUTPUT) | Pdiss | 250 | mW | 2 | |||
| Isolation test voltage (emitter to detector) | VISO | 5300 | VRMS | t = 1 s | 2 | ||
| Storage temperature range | TS | -55 | 125 | °C | 2 | ||
| Ambient operating temperature range | TA | -40 | 110 | °C | 2 | ||
| Total power dissipation | Ptot | 295 | mW | 2 | |||
| Lead solder temperature | 260 | °C | For 10 s, 1.6 mm below seating plane | 2 | |||
| High level output current (1) | IOH (1) | 0.5 | A | VO = (VCC - 4 V) | 3 | ||
| High level output current (2) | IOH (2) | 2.5 | A | VO = (VCC - 15 V) | 3 | ||
| Low level output current (1) | IOL (1) | 0.5 | A | VO = (VEE + 2.5 V) | 3 | ||
| Low level output current (2) | IOL (2) | 2.5 | A | VO = (VEE + 15 V) | 3 | ||
| High level output voltage | VOH (3) | 4 | V | IO = -100 mA; printed MIN value is VCC - 4 V, so 4 is the offset from VCC | 3 | ||
| Low level output voltage | VOL | 0.2 | 0.5 | V | IO = 100 mA | 3 | |
| High level supply current | ICCH | 2.5 | mA | Output open, IF = 7 mA to 16 mA | 3 | ||
| Low level supply current | ICCL | 2.5 | mA | Output open, VF = -3 V to +0.8 V | 3 | ||
| Threshold input current low to high | IFLH | 5 | mA | IO = 0 mA, VO > 5 V | 3 | ||
| Threshold input voltage high to low | VFHL | 0.8 | V | 3 | |||
| Input forward voltage | VF | 1 | 1.6 | V | IF = 10 mA | 3 | |
| Input reverse breakdown voltage | BVR | 5 | V | IR = 10 μA | 3 | ||
| UVLO threshold (positive going) | VUVLO+ | 11 | 13.5 | V | VO ≥ 5 V | 3 | |
| UVLO threshold (negative going) | VUVLO- | 9.5 | 12 | V | IF = 10 mA | 3 | |
| UVLO hysteresis | UVLOHYS | 1.6 | V | 3 | |||
| Common mode transient immunity at logic high output | /CMH/ | 25 | 35 | kV/μs | TA = 25 °C, IF = 10 mA to 16 mA, VCM = 1500 V, VCC = 32 V | 5 | |
| Common mode transient immunity at logic low output | /CML/ | 25 | 35 | kV/μs | TA = 25 °C, VCM = 1500 V, VCC = 32 V, VF = 0 V | 5 | |
| Propagation delay time to logic low output | tPHL | 0.1 | 0.4 | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 | |
| Propagation delay time to logic high output | tPLH | 0.1 | 0.4 | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 | |
| Pulse width distortion | PWD | 0.2 | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 | ||
| Rise time | tr | 0.1 | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 | ||
| Fall time | tf | 0.1 | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 | ||
| UVLO turn on delay | TUVLO-ON | 0.8 | μs | VO > 5 V, IF = 10 mA | 4 | ||
| UVLO turn off delay | TUVLO-OFF | 0.6 | μs | VO < 5 V, IF = 10 mA | 4 | ||
| Temperature coefficient of forward voltage | ΔVF/ΔTA | -1.4 | mV/°C | IF = 10 mA | 3 | ||
| Input capacitance | CIN | 60 | pF | f = 1 MHz, VF = 0 V | 3 | ||
| LED power dissipation (thermal table) | Pdiss | 45 | mW | Thermal characteristics measured at 25 °C | 3 | ||
| Output power dissipation (thermal table) | Pdiss | 250 | mW | Thermal characteristics measured at 25 °C | 3 | ||
| Total power dissipation (thermal table) | Ptot | 285 | mW | Thermal characteristics measured at 25 °C | 3 | ||
| Maximum LED junction temperature | Tjmax. | 125 | °C | Thermal characteristics measured at 25 °C | 3 | ||
| Maximum output die junction temperature | Tjmax. | 125 | °C | Thermal characteristics measured at 25 °C | 3 | ||
| Thermal resistance, junction emitter to board | θJEB | 169 | °C/W | Thermal characteristics measured at 25 °C | 3 | ||
| Thermal resistance, junction emitter to case | θJEC | 192 | °C/W | Thermal characteristics measured at 25 °C | 3 | ||
| Thermal resistance, junction detector to board | θJDB | 82 | °C/W | Thermal characteristics measured at 25 °C | 3 | ||
| Thermal resistance, junction detector to case | θJDC | 80 | °C/W | Thermal characteristics measured at 25 °C | 3 | ||
| Thermal resistance, junction emitter to junction detector | θJED | 200 | °C/W | Thermal characteristics measured at 25 °C | 3 | ||
| Thermal resistance, case to ambient | θCA | 2645 | °C/W | Thermal characteristics measured at 25 °C | 3 |
CAD (KiCad official)
- Symbol:
VO3120 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 4.255 mm tall, datasheet A, nominal). The maker's own 3D model does not fit the maker's drawing (see the note above) and KiCad ships none for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
vo3120-etched.step/vo3120-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vo3120.step/vo3120.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (10 pp, sha256
58d77d229ef6bce2, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# VO3120
> Vishay's own 3D model was not used: it measures 5.59 mm across the body, outside the datasheet's E1 of 6.645 ± 0.165 mm, so the model here is generated from the datasheet drawing.
**Vishay Intertech** · Digital Isolators · DIP-8
VO3120 from Vishay Intertech, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the datasheet notes pins 1 and 4 need to be connected to LED common in the CMR test circuit. |
| 2 | A | passive | LED anode; input forward current of 7 mA to 16 mA turns the output on (absolute maximum 25 mA). |
| 3 | C | passive | LED cathode; the LED is off with input voltage of -3 V to 0.8 V and reverse voltage is limited to 5 V. |
| 4 | NC | unconnected | No internal connection; the datasheet notes pins 1 and 4 need to be connected to LED common in the CMR test circuit. |
| 5 | VEE | power_in | Negative supply / output ground reference; VCC - VEE operates from 15 V to 32 V (absolute maximum 35 V). |
| 6 | VO | output | Gate-drive output stage pin with 2.5 A minimum peak output current, tied to pin 7 in the output stage. |
| 7 | VO | output | Gate-drive output stage pin with 2.5 A minimum peak output current, tied to pin 6 in the output stage. |
| 8 | VCC | power_in | Positive output supply; VCC - VEE operates from 15 V to 32 V (absolute maximum 35 V) with UVLO turn-on at 13.5 V max. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | DIP-8 |
| Category | Interface ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC - VEE | 15 | | 32 | V | | 2 |
| Input LED current (on) | IF | 7 | | 16 | mA | | 2 |
| Input voltage (off) | VF(OFF) | -3 | | 0.8 | V | | 2 |
| Operating temperature | Tamb | -40 | | 110 | °C | | 2 |
| Input forward current | IF | | | 25 | mA | | 2 |
| Peak transient input current | IF(TRAN) | | | 1 | A | < 1 μs pulse width, 300 pps | 2 |
| Reverse input voltage | VR | | | 5 | V | | 2 |
| Output power dissipation (listed under INPUT) | Pdiss | | | 45 | mW | | 2 |
| High peak output current | IOH(PEAK) | | | 2.5 | A | Max pulse width 10 μs, max duty cycle 0.2 % | 2 |
| Low peak output current | IOL(PEAK) | | | 2.5 | A | Max pulse width 10 μs, max duty cycle 0.2 % | 2 |
| Supply voltage | VCC - VEE | 0 | | 35 | V | | 2 |
| Output voltage | VO(PEAK) | 0 | | | V | Printed as 0 to + VCC (upper limit is VCC, not a number) | 2 |
| Output power dissipation (listed under OUTPUT) | Pdiss | | | 250 | mW | | 2 |
| Isolation test voltage (emitter to detector) | VISO | | | 5300 | VRMS | t = 1 s | 2 |
| Storage temperature range | TS | -55 | | 125 | °C | | 2 |
| Ambient operating temperature range | TA | -40 | | 110 | °C | | 2 |
| Total power dissipation | Ptot | | | 295 | mW | | 2 |
| Lead solder temperature | | | | 260 | °C | For 10 s, 1.6 mm below seating plane | 2 |
| High level output current (1) | IOH (1) | 0.5 | | | A | VO = (VCC - 4 V) | 3 |
| High level output current (2) | IOH (2) | 2.5 | | | A | VO = (VCC - 15 V) | 3 |
| Low level output current (1) | IOL (1) | 0.5 | | | A | VO = (VEE + 2.5 V) | 3 |
| Low level output current (2) | IOL (2) | 2.5 | | | A | VO = (VEE + 15 V) | 3 |
| High level output voltage | VOH (3) | 4 | | | V | IO = -100 mA; printed MIN value is VCC - 4 V, so 4 is the offset from VCC | 3 |
| Low level output voltage | VOL | | 0.2 | 0.5 | V | IO = 100 mA | 3 |
| High level supply current | ICCH | | | 2.5 | mA | Output open, IF = 7 mA to 16 mA | 3 |
| Low level supply current | ICCL | | | 2.5 | mA | Output open, VF = -3 V to +0.8 V | 3 |
| Threshold input current low to high | IFLH | | | 5 | mA | IO = 0 mA, VO > 5 V | 3 |
| Threshold input voltage high to low | VFHL | | | 0.8 | V | | 3 |
| Input forward voltage | VF | | 1 | 1.6 | V | IF = 10 mA | 3 |
| Input reverse breakdown voltage | BVR | 5 | | | V | IR = 10 μA | 3 |
| UVLO threshold (positive going) | VUVLO+ | 11 | | 13.5 | V | VO ≥ 5 V | 3 |
| UVLO threshold (negative going) | VUVLO- | 9.5 | | 12 | V | IF = 10 mA | 3 |
| UVLO hysteresis | UVLOHYS | | 1.6 | | V | | 3 |
| Common mode transient immunity at logic high output | /CMH/ | 25 | 35 | | kV/μs | TA = 25 °C, IF = 10 mA to 16 mA, VCM = 1500 V, VCC = 32 V | 5 |
| Common mode transient immunity at logic low output | /CML/ | 25 | 35 | | kV/μs | TA = 25 °C, VCM = 1500 V, VCC = 32 V, VF = 0 V | 5 |
| Propagation delay time to logic low output | tPHL | | 0.1 | 0.4 | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 |
| Propagation delay time to logic high output | tPLH | | 0.1 | 0.4 | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 |
| Pulse width distortion | PWD | | | 0.2 | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 |
| Rise time | tr | | 0.1 | | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 |
| Fall time | tf | | 0.1 | | μs | Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 % | 4 |
| UVLO turn on delay | TUVLO-ON | | 0.8 | | μs | VO > 5 V, IF = 10 mA | 4 |
| UVLO turn off delay | TUVLO-OFF | | 0.6 | | μs | VO < 5 V, IF = 10 mA | 4 |
| Temperature coefficient of forward voltage | ΔVF/ΔTA | | -1.4 | | mV/°C | IF = 10 mA | 3 |
| Input capacitance | CIN | | 60 | | pF | f = 1 MHz, VF = 0 V | 3 |
| LED power dissipation (thermal table) | Pdiss | | 45 | | mW | Thermal characteristics measured at 25 °C | 3 |
| Output power dissipation (thermal table) | Pdiss | | 250 | | mW | Thermal characteristics measured at 25 °C | 3 |
| Total power dissipation (thermal table) | Ptot | | 285 | | mW | Thermal characteristics measured at 25 °C | 3 |
| Maximum LED junction temperature | Tjmax. | | | 125 | °C | Thermal characteristics measured at 25 °C | 3 |
| Maximum output die junction temperature | Tjmax. | | | 125 | °C | Thermal characteristics measured at 25 °C | 3 |
| Thermal resistance, junction emitter to board | θJEB | | 169 | | °C/W | Thermal characteristics measured at 25 °C | 3 |
| Thermal resistance, junction emitter to case | θJEC | | 192 | | °C/W | Thermal characteristics measured at 25 °C | 3 |
| Thermal resistance, junction detector to board | θJDB | | 82 | | °C/W | Thermal characteristics measured at 25 °C | 3 |
| Thermal resistance, junction detector to case | θJDC | | 80 | | °C/W | Thermal characteristics measured at 25 °C | 3 |
| Thermal resistance, junction emitter to junction detector | θJED | | 200 | | °C/W | Thermal characteristics measured at 25 °C | 3 |
| Thermal resistance, case to ambient | θCA | | 2645 | | °C/W | Thermal characteristics measured at 25 °C | 3 |
## CAD (KiCad official)
- Symbol: `VO3120`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 4.255 mm tall, datasheet A, nominal). The maker's own 3D model does not fit the maker's drawing (see the note above) and KiCad ships none for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `vo3120-etched.step` / `vo3120-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `vo3120.step` / `vo3120.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Vishay Intertech datasheet](docs/vo3120-datasheet.pdf) (10 pp, sha256 `58d77d229ef6bce2`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/vo3120-datasheet.pdf)