main
History Download
Ray Publish 0.1.0 cc3d2b7

VO0601T

Vishay Intertech · Logic Output Optoisolators · SOIC-8

VO0601T from Vishay Intertech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection; leave this pin unconnected.
2 A input Input LED anode; average forward current is rated at 20 mA maximum for the single channel device.
3 C passive Input LED cathode; reverse input voltage is rated at 5 V maximum.
4 NC unconnected No internal connection; leave this pin unconnected.
5 GND power_in Ground reference for the detector side; a 0.1 µF bypass capacitor between pin 5 and pin 8 is recommended.
6 VO output Open drain NMOS detector output with output current rated at 50 mA maximum and output voltage at 7 V maximum; an external pull-up resistor of 330 Ω to 4 kΩ is required.
7 VE input Enable input (single channel only) that strobes the detector; logic low enable voltage is 0.8 V maximum and logic high enable voltage is 2 V minimum.
8 VCC power_in Supply voltage with recommended range of 4.5 V to 5.5 V and absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer Vishay Intertech
Package SOIC-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating temperature Tamb -40 100 °C 2
Supply voltage VCC 4.5 5.5 V 2
Input current low level IFL 0 250 μA 2
Input current high level IFH 5 15 mA 2
Logic low enable voltage VEL 0 0.8 V 2
Average forward current (single channel) IF 20 mA 2
Reverse input voltage VR 5 V 2
Enable input current (single channel) IE 5 mA 2
Surge current IFSM 200 mA t = 100 μs 2
Output power dissipation (single channel), input Pdiss 35 mW 2
Supply voltage VCC 7 V 1 min maximum 2
Output current IO 50 mA 2
Output voltage VO 7 V 2
Output power dissipation (single channel) Pdiss 85 mW 2
Isolation test voltage VISO 4000 VRMS t = 1 s 2
Storage temperature Tstg -55 150 °C 2
Operating temperature Tamb -40 100 °C 2
Lead solder temperature 260 °C for 10 s 2
Solder reflow temperature 260 °C for 1 min 2
Input forward voltage VF 1.1 1.4 1.7 V IF = 10 mA 3
Reverse current IR 0.01 10 μA VR = 5 V 3
High level supply current (single channel) ICCH 4.1 7 mA VE = 0.5 V, IF = 0 mA 3
High level supply current (single channel) ICCH 3.3 6 mA VE = VCC, IF = 0 mA 3
Low level supply current (single channel) ICCL 4 7 mA VE = 0.5 V, IF = 10 mA 3
Low level supply current (single channel) ICCL 3.3 6 mA VE = VCC, IF = 10 mA 3
High level output current IOH 0.002 1 μA VE = 2 V, VO = 5.5 V, IF = 250 μA 3
Low level output voltage VOL 0.2 0.6 V VE = 2 V, IF = 5 mA, IOL (sinking) = 13 mA 3
Input threshold current ITH 2.4 5 mA VE = 2 V, VO = 5.5 V, IOL (sinking) = 13 mA 3
High level enable voltage VEH 2 V 3
Low level enable voltage VEL 0.8 V 3
Propagation delay time to high output level tPLH 20 48 100 ns RL = 350 Ω, CL = 15 pF 3
Propagation delay time to low output level tPHL 25 50 100 ns RL = 350 Ω, CL = 15 pF 3
Pulse width distortion /tPHL - tPLH/ 2.9 35 ns RL = 350 Ω, CL = 15 pF 3
Propagation delay skew tPSK 8 40 ns RL = 350 Ω, CL = 15 pF 3
Common mode transient immunity (high) /CMH/ 5000 10000 V/μs /VCM/ = 50 V, VCC = 5 V, IF = 0 mA, VO(min) = 2 V, RL = 350 Ω, Tamb = 25 °C 5
Common mode transient immunity (low) /CML/ 5000 10000 V/μs /VCM/ = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max) = 0.8 V, RL = 350 Ω, Tamb = 25 °C 5
Input capacitance CI 55 pF f = 1 MHz, VF = 0 V 3
Output rise time (10 to 90 %) tr 23 ns RL = 350 Ω, CL = 15 pF 3
Output fall time (90 to 10 %) tf 7 ns RL = 350 Ω, CL = 15 pF 3
Propagation delay time of enable from VEH to VEL tELH 12 ns RL = 350 Ω, CL = 15 pF, VEL = 0 V, VEH = 3 V 3
Propagation delay time of enable from VEL to VEH tEHL 11 ns RL = 350 Ω, CL = 15 pF, VEL = 0 V, VEH = 3 V 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin • Pure tin leads • Guaranteed AC and DC performance over 1

CAD (KiCad official)

  • Symbol: VO0601T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: vo0601t-etched.step / vo0601t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vo0601t.step / vo0601t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Vishay Intertech datasheet (10 pp, sha256 0bfd8adb77bd5b94, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF