component
VNH7070ASTR
Public Made by Adomby adom
STMicroelectronics Brushed DC Motor Drivers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/vnh7070astr
19efad6
VNH7070ASTR
STMicroelectronics · Brushed DC Motor Drivers · SOIC-16
VNH7070ASTR from STMicroelectronics, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GNDA | power_in | Ground reference for low-side switch A power stage. |
| 2 | OUTA | output | High-side switch A source / low-side switch A drain output; 15 A maximum continuous output current per Table 1. |
| 3 | INA | input | Clockwise motor direction control input; CMOS logic compatible with 0.9 V low, 2.1 V high threshold per Table 7. |
| 4 | VCC | power_in | Positive power supply; 4 V to 28 V operating range, 40 V maximum transient voltage per Table 4. |
| 5 | VCC | power_in | Positive power supply; 4 V to 28 V operating range, 40 V maximum transient voltage per Table 4. |
| 6 | INB | input | Counter-clockwise motor direction control input; CMOS logic compatible with 0.9 V low, 2.1 V high threshold per Table 7. |
| 7 | OUTB | output | High-side switch B source / low-side switch B drain output; 15 A maximum continuous output current per Table 1. |
| 8 | GNDB | power_in | Ground reference for low-side switch B power stage. |
| 9 | GNDB | power_in | Ground reference for low-side switch B power stage. |
| 10 | OUTB | output | High-side switch B source / low-side switch B drain output; 15 A maximum continuous output current per Table 1. |
| 11 | PWM | input | Voltage-controlled speed modulation input with hysteresis; CMOS compatible, gates low-side FETs during on-phase, 20 kHz maximum frequency per Table 8. |
| 12 | VCC | power_in | Positive power supply; 4 V to 28 V operating range, 40 V maximum transient voltage per Table 4. |
| 13 | CS | output | Multiplexed current sense output pin; delivers current proportional to motor output current, saturation 4.6 mA typical per Table 10. |
| 14 | SEL0 | input | Channel select input; 3 V and 5 V CMOS compatible, addresses current sense output along with INA and INB per operative truth table. |
| 15 | OUTA | output | High-side switch A source / low-side switch A drain output; 15 A maximum continuous output current per Table 1. |
| 16 | GNDA | power_in | Ground reference for low-side switch A power stage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-16 |
| Category | Motor Driver ICs |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
VNH7070ASTR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
vnh7070astr-etched.step/vnh7070astr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vnh7070astr.step/vnh7070astr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (38 pp, sha256
caf9f77e187425d4, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# VNH7070ASTR
**STMicroelectronics** · Brushed DC Motor Drivers · SOIC-16
VNH7070ASTR from STMicroelectronics, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GNDA | power_in | Ground reference for low-side switch A power stage. |
| 2 | OUTA | output | High-side switch A source / low-side switch A drain output; 15 A maximum continuous output current per Table 1. |
| 3 | INA | input | Clockwise motor direction control input; CMOS logic compatible with 0.9 V low, 2.1 V high threshold per Table 7. |
| 4 | VCC | power_in | Positive power supply; 4 V to 28 V operating range, 40 V maximum transient voltage per Table 4. |
| 5 | VCC | power_in | Positive power supply; 4 V to 28 V operating range, 40 V maximum transient voltage per Table 4. |
| 6 | INB | input | Counter-clockwise motor direction control input; CMOS logic compatible with 0.9 V low, 2.1 V high threshold per Table 7. |
| 7 | OUTB | output | High-side switch B source / low-side switch B drain output; 15 A maximum continuous output current per Table 1. |
| 8 | GNDB | power_in | Ground reference for low-side switch B power stage. |
| 9 | GNDB | power_in | Ground reference for low-side switch B power stage. |
| 10 | OUTB | output | High-side switch B source / low-side switch B drain output; 15 A maximum continuous output current per Table 1. |
| 11 | PWM | input | Voltage-controlled speed modulation input with hysteresis; CMOS compatible, gates low-side FETs during on-phase, 20 kHz maximum frequency per Table 8. |
| 12 | VCC | power_in | Positive power supply; 4 V to 28 V operating range, 40 V maximum transient voltage per Table 4. |
| 13 | CS | output | Multiplexed current sense output pin; delivers current proportional to motor output current, saturation 4.6 mA typical per Table 10. |
| 14 | SEL0 | input | Channel select input; 3 V and 5 V CMOS compatible, addresses current sense output along with INA and INB per operative truth table. |
| 15 | OUTA | output | High-side switch A source / low-side switch A drain output; 15 A maximum continuous output current per Table 1. |
| 16 | GNDA | power_in | Ground reference for low-side switch A power stage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-16 |
| Category | Motor Driver ICs |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `VNH7070ASTR`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `vnh7070astr-etched.step` / `vnh7070astr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `vnh7070astr.step` / `vnh7070astr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588919421541105664) (38 pp, sha256 `caf9f77e187425d4`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/vnh7070astr-datasheet.pdf)