component
VN750PTTR-E
Public Made by Adomby adom
STMicroelectronics Power Distribution Switches, TO-252-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownVN750PTTR-E
STMicroelectronics · Power Distribution Switches · TO-252-5
VN750PTTR-E from STMicroelectronics, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT | output | High-side switch output to the load, internally current-limited (Ilim 6 A to 15 A, VCC and temperature dependent), with on-state resistance RON=60 mΩ typ at IOUT=2 A/Tj=25°C, reverse DC output current rated up to 6 A, and on-state/off-state open-load plus shorted-to-VCC detection reported on the STATUS pin. |
| 2 | STATUS | output | Open-drain diagnostic status output requiring an external pull-up, with low output voltage VSTAT=0.5 V max at ISTAT=1.6 mA, clamp voltage 6 V to 8 V at ISTAT=1 mA, leakage current 10 µA max at VSTAT=5 V, and DC status current rated ±10 mA absolute maximum, used to signal overload, thermal shutdown, undervoltage/overvoltage, and open-load conditions. |
| 3 | VCC | power_in | Battery supply pin with operating range VCC=5.5 V to 36 V (5.5 V to 41 V absolute maximum), reverse DC supply voltage limited to -0.3 V, protected by an active internal clamp against low-energy spikes and by undervoltage (3-5.5 V) and overvoltage (36 V typ) shutdown circuitry. |
| 4 | INPUT | input | CMOS-compatible logic input controlling the output switch, with input low level VIL=1.25 V max, input high level VIH=3.25 V min, input clamp voltage 6 V to 8 V, and DC input current rated ±10 mA absolute maximum. |
| 5 | GND | power_in | Ground reference pin; the device automatically turns off if this pin is disconnected (loss-of-ground protection), and the absolute maximum DC reverse ground pin current is 200 mA. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-252-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
VN750PTTR-E - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
vn750pttr-e-etched.step/vn750pttr-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vn750pttr-e.step/vn750pttr-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (38 pp, sha256
74d8651752048426, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).