VN5E160MSTR-E

{
  "slug": "vn5e160mstr-e",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Power Distribution Switches, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "vn5e160mstr-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "vn5e160mstr-e.kicad_sym",
    "vn5e160mstr-e.kicad_mod",
    "vn5e160mstr-e.glb",
    "vn5e160mstr-e.step",
    "vn5e160mstr-e.lbr",
    "docs/hero.png",
    "docs/vn5e160mstr-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "vn5e160mstr-e-hero.glb",
    "vn5e160mstr-e-hero.overlay.json"
  ],
  "component": {
    "mpn": "VN5E160MSTR-E",
    "manufacturer": "STMicroelectronics",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906391295180800",
    "parts": {
      "symbol": "vn5e160mstr-e.kicad_sym",
      "footprint": "vn5e160mstr-e.kicad_mod",
      "model_3d": "vn5e160mstr-e-hero.glb",
      "model_3d_plain": "vn5e160mstr-e.glb",
      "model_3d_step": "vn5e160mstr-e-etched.step",
      "model_3d_step_plain": "vn5e160mstr-e.step",
      "lbr": "vn5e160mstr-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C2970580",
      "digikey": "497-11685-2-ND",
      "mouser": "511-VN5E160MSTR-E"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T16:13:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-11685-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-VN5E160MSTR-E",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection that must be reverse battery protected by an external diode/resistor network (DC reverse ground pin current max 200 mA)."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "input",
        "description": "Voltage-controlled, CMOS-compatible input with hysteresis (VIL 0.9 V min, VIH 2.1 V, 0.25 V hysteresis) that controls the output switch state."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "output",
        "description": "Analog current sense pin delivering a current proportional to the load current, or a fixed VSENSEH fault flag on power limitation or overtemperature; high-impedance when CS_DIS is high."
      },
      {
        "number": "4",
        "name": "CS_DIS",
        "type": "input",
        "description": "Active-high CMOS-compatible pin that disables the current sense pin (VCSDL 0.9 V, VCSDH 2.1 V)."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Battery connection, operating range 4.5 V to 28 V, with maximum DC supply voltage of 41 V."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output to the high-side load, with DC short-circuit current limit typically 10 A."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output to the high-side load, with DC short-circuit current limit typically 10 A."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Battery connection, operating range 4.5 V to 28 V, with maximum DC supply voltage of 41 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 5 and 8 are both VCC and pins 6 and 7 are both OUT in Figure 2; the datasheet gives no separate",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 34,
        "cost_usd": 0.6396,
        "at": "2026-10-10T16:13:08"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906391295180800",
        "pages": 34,
        "sha256": "5d0443e30252c2e4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "vn5e160mstr-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "vn5e160mstr-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7811d79b7d17ec651673b4a9ffc6f7521a3fa6870b3b749b446145a57f472e86",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}