main
Ray
Publish 0.1.0
96e6e85
VIPER26LN
STMicroelectronics · AC-DC Controllers And Regulators · DIP-7
VIPER26LN from STMicroelectronics, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground and MOSFET source, connecting the source of the internal MOSFET and the controller ground reference. |
| 2 | VDD | power_in | Controller supply with an operating range of 11.5 V to 23.5 V, a 23.5 V minimum VDD clamp, and an external storage capacitor required across VDD and GND. |
| 3 | LIM | input | Drain current limitation pin where an external resistor to GND lowers IDlim (default when left open or RLIM above 80 kΩ) and any capacitor to GND must be below 470 nF. |
| 4 | FB | input | Inverting input of the transconductance error amplifier, internally referenced to 3.3 V (3.2 V to 3.4 V), with an absolute maximum of 4.8 V, and tying it to GND disables the error amplifier. |
| 5 | COMP | passive | Output of the internal error amplifier for loop compensation, with an absolute maximum of 3.5 V, and directly driven by the optocoupler in isolated secondary-side regulation. |
| 7 | DRAIN | passive | Internal 800 V avalanche-rugged power MOSFET drain (800 V minimum breakdown) that also supplies the startup charging current to VDD, with the PCB copper under the DRAIN pins used for heat dissipation. |
| 8 | DRAIN | passive | Internal 800 V avalanche-rugged power MOSFET drain (800 V minimum breakdown) that also supplies the startup charging current to VDD, with the PCB copper under the DRAIN pins used for heat dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DIP-7 |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown voltage | VBVDSS | 800 | V | IDRAIN = 1 mA, VCOMP = VGND, TJ = 25°C | 4 | ||
| OFF state drain current | IOFF | 60 | µA | VDRAIN = max. rating, VCOMP = VGND, TJ = 25°C | 4 | ||
| Static drain-source ON-resistance | RDS(on) | 7 | Ω | IDRAIN = 0.2 A, TJ = 25°C | 4 | ||
| Static drain-source ON-resistance | RDS(on) | 14 | Ω | IDRAIN = 0.2 A, TJ = 125°C | 4 | ||
| Drain-source start voltage | VDRAIN_START | 90 | V | IDRAIN = 1 mA; VCOMP = GND; TJ = 25°C | 4 | ||
| Charging current during startup | IDDch1 | -0.6 | -1.8 | mA | VDRAIN = 100 to 640 V; VDD = 4 V | 4 | |
| Charging current during autorestart falling edge | IDDch2 | -7 | -13 | mA | VDRAIN = 100 to 640 V; VDD = 9 V falling edge | 5 | |
| VDD operating voltage range | VDD | 11.5 | 23.5 | V | 5 | ||
| VDD clamp voltage | VDDclamp | 23.5 | V | IDD = 15 mA | 5 | ||
| VDD startup threshold | VDDon | 12 | 13 | 14 | V | 5 | |
| VDD on internal high voltage current generator threshold | VDDCSon | 9.5 | 10.5 | 11.5 | V | 5 | |
| VDD undervoltage shutdown threshold | VDDoff | 7 | 8 | 9 | V | 5 | |
| Operating supply current, not switching | IDD0 | 0.6 | mA | FOSC = 0 kHz; VCOMP = GND | 5 | ||
| Operating supply current, switching | IDD1 | 2 | mA | VDRAIN = 120 V; VSW = 60 kHz | 5 | ||
| Operating supply current with VDD < VDDoff | IDDoff | 0.35 | mA | VDD < VDDoff | 5 | ||
| Open loop failure current threshold | IDDol | 4 | mA | VDD = VDDclamp; VCOMP = 3.3 V | 5 | ||
| FB reference voltage | VREF_FB | 3.2 | 3.3 | 3.4 | V | 5 | |
| Burst mode threshold | VCOMPL | 1 | 1.1 | 1.2 | V | TJ = 25°C | 5 |
| Drain current limitation | IDLIM | 0.66 | 0.7 | 0.74 | A | ILIM = -10 µA; VCOMP = 3.3 V; TJ = 25 °C | 5 |
| Minimum turn-on time | tON_MIN | 480 | ns | 5 | |||
| Maximum duty cycle | DMAX | 70 | 80 | % | 6 | ||
| Switching frequency (VIPER26L) | FOSC | 54 | 60 | 66 | kHz | 6 | |
| Modulation depth | FD | -4 | 4 | kHz | FOSC = 60 kHz | 6 | |
| Thermal shutdown temperature threshold | TSD | 150 | 160 | °C | 6 | ||
| Drain-to-source (ground) voltage | VDRAIN | 800 | V | 3 | |||
| Pulse drain current | IDRAIN | 3 | A | limited by TJ = 150 °C | 3 | ||
| COMP voltage | VCOMP | -0.3 | 3.5 | V | 3 | ||
| FB voltage | VFB | -0.3 | 4.8 | V | 3 | ||
| LIM voltage | VLIM | -0.3 | 2.4 | V | 3 | ||
| Supply voltage | VDD | -0.3 | V | 3 | |||
| Input current | IDD | -0.3 | 20 | mA | 3 | ||
| Power dissipation (DIP7) | PTOT | 1 | W | Tamb < 40 °C (DIP7) | 3 | ||
| Junction temperature operating range | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 3 | ||
| Repetitive avalanche energy | EAV | 5 | mJ | limited by TJ = 150°C | 4 | ||
| Repetitive avalanche current | IAR | 1.5 | A | limited by TJ = 150°C | 4 | ||
| Thermal resistance junction to case (1) | RTH-JC | 10 | °C/W | Dissipated power = 1 W; FR4 single side, minimum copper area (note 1) | 3 | ||
| Thermal resistance junction ambient (1) | RTH-JA | 120 | °C/W | Dissipated power = 1 W; FR4 single side, minimum copper area (note 1) | 3 | ||
| Thermal resistance junction to case (2) | RTH-JC | 5 | °C/W | Dissipated power = 1 W; FR4 single side, 100 mm² Cu 35 µm (note 2) | 3 | ||
| Thermal resistance junction ambient (2) | RTH-JA | 95 | °C/W | Dissipated power = 1 W; FR4 single side, 100 mm² Cu 35 µm (note 2) | 3 | ||
| Pull-up current | IFB_PULL UP | -1 | µA | 5 | |||
| Trans conductance | GM | 2 | mA/V | VCOMP = 1.5 V, VFB > VFB REF | 5 | ||
| Low level clamp voltage | VLIM_LOW | 0.5 | V | ILIM = -100 µA | 5 | ||
| Upper saturation limit | VCOMPH | 3 | V | TJ = 25°C | 5 | ||
| Burst mode hysteresis | VCOMPL_HYS | 40 | mV | TJ = 25°C | 5 | ||
| ΔVCOMP/ΔIDRAIN | HCOMP | 3 | V/A | 5 | |||
| Dynamic resistance | RCOMP(DYN) | 15 | kΩ | VFB = GND | 5 | ||
| Source / sink current | ICOMP | 150 | µA | VFB > 100 mV | 5 | ||
| Max. source current | ICOMP | 220 | µA | VCOMP = GND; VFB = GND | 5 | ||
| Soft-start time | tSS | 8.5 | ms | 5 | |||
| Burst mode current limitation | IDlim_bm | 145 | mA | VCOMP = VCOMPL | 5 | ||
| Overload time | tOVL | 50 | ms | 5 | |||
| Restart time after fault | tRESTART | 1 | s | 6 | |||
| Modulation frequency | FM | 230 | Hz | 6 | |||
| Thermal shutdown hysteresis | THYS | 30 | °C | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Note: The copper area for heat dissipation has to be designed under the DRAIN pins. | 2 |
CAD (KiCad official)
- Symbol:
VIPER26LN - Footprint:
Package_DIP:DIP-8-N6_W7.62mm - 3D model: DIP-7 (KiCad packages3D, STEP)
- 3D model files:
viper26ln-etched.step/viper26ln-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);viper26ln.step/viper26ln.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (34 pp, sha256
396324b4060be48c, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# VIPER26LN
**STMicroelectronics** · AC-DC Controllers And Regulators · DIP-7
VIPER26LN from STMicroelectronics, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground and MOSFET source, connecting the source of the internal MOSFET and the controller ground reference. |
| 2 | VDD | power_in | Controller supply with an operating range of 11.5 V to 23.5 V, a 23.5 V minimum VDD clamp, and an external storage capacitor required across VDD and GND. |
| 3 | LIM | input | Drain current limitation pin where an external resistor to GND lowers IDlim (default when left open or RLIM above 80 kΩ) and any capacitor to GND must be below 470 nF. |
| 4 | FB | input | Inverting input of the transconductance error amplifier, internally referenced to 3.3 V (3.2 V to 3.4 V), with an absolute maximum of 4.8 V, and tying it to GND disables the error amplifier. |
| 5 | COMP | passive | Output of the internal error amplifier for loop compensation, with an absolute maximum of 3.5 V, and directly driven by the optocoupler in isolated secondary-side regulation. |
| 7 | DRAIN | passive | Internal 800 V avalanche-rugged power MOSFET drain (800 V minimum breakdown) that also supplies the startup charging current to VDD, with the PCB copper under the DRAIN pins used for heat dissipation. |
| 8 | DRAIN | passive | Internal 800 V avalanche-rugged power MOSFET drain (800 V minimum breakdown) that also supplies the startup charging current to VDD, with the PCB copper under the DRAIN pins used for heat dissipation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DIP-7 |
| Category | Power Management (PMIC) |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown voltage | VBVDSS | 800 | | | V | IDRAIN = 1 mA, VCOMP = VGND, TJ = 25°C | 4 |
| OFF state drain current | IOFF | | | 60 | µA | VDRAIN = max. rating, VCOMP = VGND, TJ = 25°C | 4 |
| Static drain-source ON-resistance | RDS(on) | | | 7 | Ω | IDRAIN = 0.2 A, TJ = 25°C | 4 |
| Static drain-source ON-resistance | RDS(on) | | | 14 | Ω | IDRAIN = 0.2 A, TJ = 125°C | 4 |
| Drain-source start voltage | VDRAIN_START | | | 90 | V | IDRAIN = 1 mA; VCOMP = GND; TJ = 25°C | 4 |
| Charging current during startup | IDDch1 | -0.6 | | -1.8 | mA | VDRAIN = 100 to 640 V; VDD = 4 V | 4 |
| Charging current during autorestart falling edge | IDDch2 | -7 | | -13 | mA | VDRAIN = 100 to 640 V; VDD = 9 V falling edge | 5 |
| VDD operating voltage range | VDD | 11.5 | | 23.5 | V | | 5 |
| VDD clamp voltage | VDDclamp | 23.5 | | | V | IDD = 15 mA | 5 |
| VDD startup threshold | VDDon | 12 | 13 | 14 | V | | 5 |
| VDD on internal high voltage current generator threshold | VDDCSon | 9.5 | 10.5 | 11.5 | V | | 5 |
| VDD undervoltage shutdown threshold | VDDoff | 7 | 8 | 9 | V | | 5 |
| Operating supply current, not switching | IDD0 | | | 0.6 | mA | FOSC = 0 kHz; VCOMP = GND | 5 |
| Operating supply current, switching | IDD1 | | | 2 | mA | VDRAIN = 120 V; VSW = 60 kHz | 5 |
| Operating supply current with VDD < VDDoff | IDDoff | | | 0.35 | mA | VDD < VDDoff | 5 |
| Open loop failure current threshold | IDDol | 4 | | | mA | VDD = VDDclamp; VCOMP = 3.3 V | 5 |
| FB reference voltage | VREF_FB | 3.2 | 3.3 | 3.4 | V | | 5 |
| Burst mode threshold | VCOMPL | 1 | 1.1 | 1.2 | V | TJ = 25°C | 5 |
| Drain current limitation | IDLIM | 0.66 | 0.7 | 0.74 | A | ILIM = -10 µA; VCOMP = 3.3 V; TJ = 25 °C | 5 |
| Minimum turn-on time | tON_MIN | | | 480 | ns | | 5 |
| Maximum duty cycle | DMAX | 70 | | 80 | % | | 6 |
| Switching frequency (VIPER26L) | FOSC | 54 | 60 | 66 | kHz | | 6 |
| Modulation depth | FD | -4 | | 4 | kHz | FOSC = 60 kHz | 6 |
| Thermal shutdown temperature threshold | TSD | 150 | 160 | | °C | | 6 |
| Drain-to-source (ground) voltage | VDRAIN | | | 800 | V | | 3 |
| Pulse drain current | IDRAIN | | | 3 | A | limited by TJ = 150 °C | 3 |
| COMP voltage | VCOMP | -0.3 | | 3.5 | V | | 3 |
| FB voltage | VFB | -0.3 | | 4.8 | V | | 3 |
| LIM voltage | VLIM | -0.3 | | 2.4 | V | | 3 |
| Supply voltage | VDD | -0.3 | | | V | | 3 |
| Input current | IDD | -0.3 | | 20 | mA | | 3 |
| Power dissipation (DIP7) | PTOT | | | 1 | W | Tamb < 40 °C (DIP7) | 3 |
| Junction temperature operating range | TJ | -40 | | 150 | °C | | 3 |
| Storage temperature | TSTG | -55 | | 150 | °C | | 3 |
| Repetitive avalanche energy | EAV | | | 5 | mJ | limited by TJ = 150°C | 4 |
| Repetitive avalanche current | IAR | | | 1.5 | A | limited by TJ = 150°C | 4 |
| Thermal resistance junction to case (1) | RTH-JC | | | 10 | °C/W | Dissipated power = 1 W; FR4 single side, minimum copper area (note 1) | 3 |
| Thermal resistance junction ambient (1) | RTH-JA | | | 120 | °C/W | Dissipated power = 1 W; FR4 single side, minimum copper area (note 1) | 3 |
| Thermal resistance junction to case (2) | RTH-JC | | | 5 | °C/W | Dissipated power = 1 W; FR4 single side, 100 mm² Cu 35 µm (note 2) | 3 |
| Thermal resistance junction ambient (2) | RTH-JA | | | 95 | °C/W | Dissipated power = 1 W; FR4 single side, 100 mm² Cu 35 µm (note 2) | 3 |
| Pull-up current | IFB_PULL UP | | -1 | | µA | | 5 |
| Trans conductance | GM | | 2 | | mA/V | VCOMP = 1.5 V, VFB > VFB REF | 5 |
| Low level clamp voltage | VLIM_LOW | | 0.5 | | V | ILIM = -100 µA | 5 |
| Upper saturation limit | VCOMPH | | 3 | | V | TJ = 25°C | 5 |
| Burst mode hysteresis | VCOMPL_HYS | | 40 | | mV | TJ = 25°C | 5 |
| ΔVCOMP/ΔIDRAIN | HCOMP | | 3 | | V/A | | 5 |
| Dynamic resistance | RCOMP(DYN) | | 15 | | kΩ | VFB = GND | 5 |
| Source / sink current | ICOMP | | 150 | | µA | VFB > 100 mV | 5 |
| Max. source current | ICOMP | | 220 | | µA | VCOMP = GND; VFB = GND | 5 |
| Soft-start time | tSS | | 8.5 | | ms | | 5 |
| Burst mode current limitation | IDlim_bm | | 145 | | mA | VCOMP = VCOMPL | 5 |
| Overload time | tOVL | | 50 | | ms | | 5 |
| Restart time after fault | tRESTART | | 1 | | s | | 6 |
| Modulation frequency | FM | | 230 | | Hz | | 6 |
| Thermal shutdown hysteresis | THYS | | 30 | | °C | | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | Note: The copper area for heat dissipation has to be designed under the DRAIN pins. | 2 |
## CAD (KiCad official)
- Symbol: `VIPER26LN`
- Footprint: `Package_DIP:DIP-8-N6_W7.62mm`
- 3D model: DIP-7 (KiCad packages3D, STEP)
- 3D model files: `viper26ln-etched.step` / `viper26ln-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `viper26ln.step` / `viper26ln.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/viper26ln.pdf) (34 pp, sha256 `396324b4060be48c`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/viper26ln-datasheet.pdf)