component
VIPER222LSTR
Public Made by Adomby adom
STMicroelectronics AC-DC Controllers And Regulators, SSOP-10-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownVIPER222LSTR
STMicroelectronics · AC-DC Controllers And Regulators · SSOP-10-150mil
VIPER222LSTR from STMicroelectronics, in a SSOP-10-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Connected to the source of the internal power MOSFET and controller ground reference. |
| 2 | VCC | power_in | Supply voltage of the control section with operating range 4.5 to 30 V providing charging current for external capacitor. |
| 3 | NC | unconnected | Not connected internally; must be connected to GND pin. |
| 4 | EA-IN | input | Input of the error amplifier accepting voltages from -0.3 to 4.8 V with -1 µA pull-up current. |
| 5 | EA-OUT | output | Output of the error amplifier with 3 V saturation limit and 100 µA source/sink current capability. |
| 6 | DRAIN | output | High voltage drain pin of internal 730 V power MOSFET with 2 A pulse current rating and 15 Ω ON-state resistance; start-up bias current drawn from this pin; connect to adequate PCB copper area for heat dissipation. |
| 7 | DRAIN | output | High voltage drain pin of internal 730 V power MOSFET with 2 A pulse current rating and 15 Ω ON-state resistance; start-up bias current drawn from this pin; connect to adequate PCB copper area for heat dissipation. |
| 8 | DRAIN | output | High voltage drain pin of internal 730 V power MOSFET with 2 A pulse current rating and 15 Ω ON-state resistance; start-up bias current drawn from this pin; connect to adequate PCB copper area for heat dissipation. |
| 9 | DRAIN | output | High voltage drain pin of internal 730 V power MOSFET with 2 A pulse current rating and 15 Ω ON-state resistance; start-up bias current drawn from this pin; connect to adequate PCB copper area for heat dissipation. |
| 10 | DRAIN | output | High voltage drain pin of internal 730 V power MOSFET with 2 A pulse current rating and 15 Ω ON-state resistance; start-up bias current drawn from this pin; connect to adequate PCB copper area for heat dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SSOP-10-150mil |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
VIPER222LSTR - Footprint:
Package_SO:SSOP-10_3.9x4.9mm_P1.00mm - 3D model: SSOP-10-150mil (KiCad packages3D, STEP)
- 3D model files:
viper222lstr-etched.step/viper222lstr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);viper222lstr.step/viper222lstr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (20 pp, sha256
fdc38550a4604ba3, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).