VIPER06HS

{
  "slug": "viper06hs",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics AC-DC Controllers And Regulators, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "viper06hs",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "viper06hs.kicad_sym",
    "viper06hs.kicad_mod",
    "viper06hs.glb",
    "viper06hs.step",
    "viper06hs.lbr",
    "docs/hero.png",
    "docs/viper06hs-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "viper06hs-hero.glb",
    "viper06hs-hero.overlay.json",
    "viper06hs-etched.glb"
  ],
  "component": {
    "mpn": "VIPER06HS",
    "manufacturer": "STMicroelectronics",
    "package": "SOP-10",
    "pin_count": 10,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.st.com/resource/en/datasheet/viper06hs.pdf",
    "parts": {
      "symbol": "viper06hs.kicad_sym",
      "footprint": "viper06hs.kicad_mod",
      "model_3d": "viper06hs-hero.glb",
      "model_3d_plain": "viper06hs-etched.glb",
      "model_3d_step": "viper06hs-etched.step",
      "model_3d_step_plain": "viper06hs.step",
      "lbr": "viper06hs.lbr"
    },
    "distributor_links": {
      "lcsc": "C443988",
      "digikey": "497-16228-5-ND",
      "mouser": "511-VIPER06HS"
    },
    "distributor_check": {
      "checked_at": "2026-11-06T00:45:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-16228-5-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "511-VIPER06HS",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Connected to the source of the internal power MOSFET and the controller ground reference."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage of the control section that provides the charging current of the external capacitor, with an operating voltage range of 11.5 V to 23.5 V and an input current limit of 20 mA."
      },
      {
        "number": "3",
        "name": "LIM",
        "type": "input",
        "description": "Sets the drain current limitation, which is reduced by an external resistor to GND and is left open for the default limit, with an input pin voltage range of -0.3 V to 2.8 V."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the internal transconductance error amplifier with a reference voltage VREF_FB of 3.2 V to 3.4 V, with an input pin voltage range of -0.3 V to 4.8 V."
      },
      {
        "number": "5",
        "name": "COMP",
        "type": "output",
        "description": "Output of the internal transconductance error amplifier used for loop compensation, with a linear voltage range from VCOMPL to VCOMPH and an input pin voltage range of -0.3 V to 3.5 V."
      },
      {
        "number": "6",
        "name": "DRAIN",
        "type": "passive",
        "description": "High-voltage drain pin of the internal power MOSFET, rated 800 V, which also draws the high-voltage startup bias current and is connected to the metal frame to facilitate heat dissipation."
      },
      {
        "number": "7",
        "name": "DRAIN",
        "type": "passive",
        "description": "High-voltage drain pin of the internal power MOSFET, rated 800 V, which also draws the high-voltage startup bias current and is connected to the metal frame to facilitate heat dissipation."
      },
      {
        "number": "8",
        "name": "DRAIN",
        "type": "passive",
        "description": "High-voltage drain pin of the internal power MOSFET, rated 800 V, which also draws the high-voltage startup bias current and is connected to the metal frame to facilitate heat dissipation."
      },
      {
        "number": "9",
        "name": "DRAIN",
        "type": "passive",
        "description": "High-voltage drain pin of the internal power MOSFET, rated 800 V, which also draws the high-voltage startup bias current and is connected to the metal frame to facilitate heat dissipation."
      },
      {
        "number": "10",
        "name": "DRAIN",
        "type": "passive",
        "description": "High-voltage drain pin of the internal power MOSFET, rated 800 V, which also draws the high-voltage startup bias current and is connected to the metal frame to facilitate heat dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 28,
        "cost_usd": 0.0208,
        "at": "2026-11-06T00:44:56"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/viper06hs.pdf",
        "pages": 28,
        "sha256": "1f4b7d4d7eefd84f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "viper06hs.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.06,
          4.9,
          1.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a47fa6a24fec6b35fbb69d075e7771e7a5d1171378888a1248e6cf37ea43bf03",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "viper06hs-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.06,
          4.9,
          1.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3349033ce10213e9f7d46fa7354419900e7602575d9d5f92d7c2f145814f63c6",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}