VIPER06HN

{
  "slug": "viper06hn",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics AC-DC Controllers And Regulators, DIP-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "viper06hn",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "viper06hn.kicad_sym",
    "viper06hn.kicad_mod",
    "viper06hn.glb",
    "viper06hn.step",
    "viper06hn.lbr",
    "docs/hero.png",
    "docs/viper06hn-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "viper06hn-hero.glb",
    "viper06hn-hero.overlay.json"
  ],
  "component": {
    "mpn": "VIPER06HN",
    "manufacturer": "STMicroelectronics",
    "package": "DIP-7",
    "pin_count": 7,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603071644173029376",
    "parts": {
      "symbol": "viper06hn.kicad_sym",
      "footprint": "viper06hn.kicad_mod",
      "model_3d": "viper06hn-hero.glb",
      "model_3d_plain": "viper06hn.glb",
      "model_3d_step": "viper06hn-etched.step",
      "model_3d_step_plain": "viper06hn.step",
      "lbr": "viper06hn.lbr"
    },
    "distributor_links": {
      "lcsc": "C2832855",
      "digikey": "497-12990-5-ND",
      "mouser": "511-VIPER06HN"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T16:16:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-12990-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-VIPER06HN",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Connected to the source of the internal power MOSFET and serves as the controller ground reference."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage of the control section, operating range 11.5 V to 23.5 V, with an internal clamp of 23.5 V and a maximum input current of 20 mA; it also receives the charging current of the external capacitor."
      },
      {
        "number": "3",
        "name": "LIM",
        "type": "passive",
        "description": "Sets the drain current limitation; an external resistor to GND reduces the limit (values above 80 kΩ or an open pin give the default IDlim), and the pin must be left open for the default limit, with VLIM rated -0.3 V to 2.8 V."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the internal transconductance error amplifier with a reference of 3.2 V to 3.4 V (VREF_FB), and an input voltage rating of -0.3 V to 4.8 V."
      },
      {
        "number": "5",
        "name": "COMP",
        "type": "passive",
        "description": "Output of the internal transconductance error amplifier, where the compensation network is connected to GND; the linear range runs from VCOMPL (1.1 V typ.) to VCOMPH (3 V), with an input voltage rating of -0.3 V to 3.5 V."
      },
      {
        "number": "7",
        "name": "DRAIN",
        "type": "power_in",
        "description": "High-voltage drain pin of the internal power MOSFET, rated 800 V, which also draws the built-in high-voltage startup bias current; the pins are connected to the metal frame for heat dissipation."
      },
      {
        "number": "8",
        "name": "DRAIN",
        "type": "power_in",
        "description": "High-voltage drain pin of the internal power MOSFET, rated 800 V, which also draws the built-in high-voltage startup bias current; the pins are connected to the metal frame for heat dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: VIPER06HN is listed in Table 10 as a DIP-7 tube order code, so the DIP-7 pinout from Table 2 applies"
        ],
        "pages_sent": 28,
        "cost_usd": 0.0702,
        "at": "2026-10-08T16:16:27"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603071644173029376",
        "pages": 28,
        "sha256": "1f4b7d4d7eefd84f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "viper06hn.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          10.16,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "f90bd1fa5f010bc999f2dd88ca613ee145644353e91e90fc2564259080330cbf",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "viper06hn-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          10.16,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "c632758120fb2fb0a1e275b3a1521a553aca3a0e105b78859db1a5efd93b62c8",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}