main
Ray
Publish 0.1.0
116a11d
VI510L
VIBRATION · RF Chips · SOP-8
VI510L from VIBRATION, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin (VssRF in the typical circuit). |
| 2 | ANT | input | RF signal input pin for the antenna. |
| 3 | VDD | power_in | Power supply pin, DC 2.0~5.5V. |
| 4 | CTH | input | Selects the reference signal mode for the internal data comparator. |
| 5 | DO | output | Demodulated data signal output. |
| 6 | SHUT | input | Shutdown mode: connect to supply; operating mode: connect to ground. |
| 7 | NC | unconnected | Not connected, leave floating. |
| 8 | REFOSC | input | External crystal connection pin for the reference oscillator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VIBRATION |
| Package | SOP-8 |
| Category | RF & Radio |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2 | 3.3 | 5.5 | V | 3 | |
| Operating temperature | TA | -40 | 125 | ℃ | 3 | ||
| Supply voltage slew rate | θ | 1 | mV/μs | 3 | |||
| Supply voltage | VDD | -0.3 | 5.5 | V | 3 | ||
| Interface voltage | VIN | -0.3 | V | max VDD+0.3 V | 4 | ||
| Junction temperature | TJ | -40 | 150 | ℃ | 4 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 4 | ||
| Soldering temperature | TSDR | 255 | ℃ | 持续至少 30 秒 | 4 | ||
| ESD rating HBM | VHBM | -8 | 8 | kV | 人体模型(HBM) | 4 | |
| Supply voltage (receiver) | VDD | 2 | 5.5 | V | 5 | ||
| Data rate | DR | 10 | kbps | 5 | |||
| Operating current | IOP | 4.98 | mA | fRF=315MHz,VDD=3.3V | 5 | ||
| Operating current | IOP | 5.07 | mA | fRF=315MHz,VDD=5V | 5 | ||
| Standby current | ISTBY | 0.01 | µA | VSHUT=VDD | 5 | ||
| Receiver sensitivity | -113 | dBm | fRF = 315MHz | 5 | |||
| Receiver bandwidth | BW | 350 | kHz | fRF = 315MHz | 5 | ||
| CTH leakage current | IZCTH(leak) | -100 | 100 | nA | TA = +85°C | 5 | |
| Receiver startup time | 4 | ms | 从VDD上电到接收 | 5 | |||
| SHUT startup time | 3 | ms | 从SHUT引脚拉低到接收 | 5 | |||
| Crystal frequency accuracy | -20 | 20 | ppm | 6 | |||
| Crystal load capacitance | CLOAD | 15 | pF | 6 | |||
| Crystal equivalent resistance | Rm | 60 | Ω | 6 | |||
| Crystal startup time | tXTAL | 400 | µs | 6 |
CAD (KiCad official)
- Symbol:
VI510L - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
vi510l-etched.step/vi510l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vi510l.step/vi510l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: VIBRATION datasheet (7 pp, sha256
588fd65feae1000e, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# VI510L
**VIBRATION** · RF Chips · SOP-8
VI510L from VIBRATION, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin (VssRF in the typical circuit). |
| 2 | ANT | input | RF signal input pin for the antenna. |
| 3 | VDD | power_in | Power supply pin, DC 2.0~5.5V. |
| 4 | CTH | input | Selects the reference signal mode for the internal data comparator. |
| 5 | DO | output | Demodulated data signal output. |
| 6 | SHUT | input | Shutdown mode: connect to supply; operating mode: connect to ground. |
| 7 | NC | unconnected | Not connected, leave floating. |
| 8 | REFOSC | input | External crystal connection pin for the reference oscillator. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VIBRATION |
| Package | SOP-8 |
| Category | RF & Radio |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2 | 3.3 | 5.5 | V | | 3 |
| Operating temperature | TA | -40 | | 125 | ℃ | | 3 |
| Supply voltage slew rate | θ | | | 1 | mV/μs | | 3 |
| Supply voltage | VDD | -0.3 | | 5.5 | V | | 3 |
| Interface voltage | VIN | -0.3 | | | V | max VDD+0.3 V | 4 |
| Junction temperature | TJ | -40 | | 150 | ℃ | | 4 |
| Storage temperature | TSTG | -65 | | 150 | ℃ | | 4 |
| Soldering temperature | TSDR | | | 255 | ℃ | 持续至少 30 秒 | 4 |
| ESD rating HBM | VHBM | -8 | | 8 | kV | 人体模型(HBM) | 4 |
| Supply voltage (receiver) | VDD | 2 | | 5.5 | V | | 5 |
| Data rate | DR | | | 10 | kbps | | 5 |
| Operating current | IOP | | 4.98 | | mA | fRF=315MHz,VDD=3.3V | 5 |
| Operating current | IOP | | 5.07 | | mA | fRF=315MHz,VDD=5V | 5 |
| Standby current | ISTBY | | 0.01 | | µA | VSHUT=VDD | 5 |
| Receiver sensitivity | | | -113 | | dBm | fRF = 315MHz | 5 |
| Receiver bandwidth | BW | | 350 | | kHz | fRF = 315MHz | 5 |
| CTH leakage current | IZCTH(leak) | -100 | | 100 | nA | TA = +85°C | 5 |
| Receiver startup time | | | | 4 | ms | 从VDD上电到接收 | 5 |
| SHUT startup time | | | | 3 | ms | 从SHUT引脚拉低到接收 | 5 |
| Crystal frequency accuracy | | -20 | | 20 | ppm | | 6 |
| Crystal load capacitance | CLOAD | | 15 | | pF | | 6 |
| Crystal equivalent resistance | Rm | | | 60 | Ω | | 6 |
| Crystal startup time | tXTAL | | | 400 | µs | | 6 |
## CAD (KiCad official)
- Symbol: `VI510L`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `vi510l-etched.step` / `vi510l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `vi510l.step` / `vi510l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [VIBRATION datasheet](docs/vi510l-datasheet.pdf) (7 pp, sha256 `588fd65feae1000e`, retrieved 2026-10-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/vi510l-datasheet.pdf)