component
VG197A
Public Made by Adomby adom
VIBRATION RF Transceiver ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownVG197A
VIBRATION · RF Transceiver ICs · SOP-8
VG197A from VIBRATION, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XO | output | Crystal oscillator output; the 12MHz crystal load capacitance is recommended as 22pF. |
| 2 | XI | input | Crystal oscillator input, used with the 12MHz crystal (load capacitance recommended as 22pF). |
| 3 | VSS | power_in | Ground pin for the device. |
| 4 | ANT | passive | RF input/output port to the antenna; the maximum input RF signal strength is +10 dBm. |
| 5 | CS | input | Active-low chip enable; pulling CS low wakes the chip from sleep mode, and the crystal needs about 1.5ms to settle before data access. |
| 6 | CLK | input | I2C/SPI clock input. |
| 7 | SDA | bidirectional | I2C/SPI data line; on VG197A it is the shared 3-wire SPI data line, and VG197A has no internal pull-up on SDA or SCL. |
| 8 | VDD33 | power_in | 3.3V supply input; the operating supply range is 1.9V to 3.6V with an absolute maximum of 3.7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VIBRATION |
| Package | SOP-8 |
| Category | RF And Wireless |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
VG197A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
vg197a-etched.step/vg197a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vg197a.step/vg197a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: VIBRATION datasheet (36 pp, sha256
68926a952885eb71, retrieved 2026-10-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).