main
Ray
Publish 0.1.0
310e726
(footprint "Adam_Tech_USB-A3-S_2a7889"
(version 20240108)
(generator "adom_assets")
(layer "F.Cu")
(descr "Derived host land (Adam Tech USB-A3-S-RA drawing (rev C, 5/11/26) 'RECOMMENDED PCB LAYOUT' (inch [mm]): pin holes Ø.028 [0.70]; pins 1-4 in one row (1 at the left, 2.50 / 2.00 / 2.50 apart, symmetric about the centre line), pins 5-9 in a row .059 [1.50] behind them at .079 [2.00] pitch with 7 on the centre line, 9 at the left; two shell holes Ø.091 [2.30] .517 [13.14] apart, .079 [2.00] in front of the 1-4 row and .464 [11.78] from the connector (board) edge. Pad diameters are not printed: 1.2 for the Ø0.70 pins and 3.3 for the Ø2.30 shell holes (derived). Body 14.50 wide (.571), 16.45 deep (.648 REF), 7.12 high (.280); front at the connector edge.; family D2a7889, spec 2a788986e4)")
(tags "adom generated")
(attr through_hole)
(property "Reference" "REF**" (at 0 -3.92 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))
(property "Value" "Adam_Tech_USB-A3-S_2a7889" (at 0 15.03 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))
(fp_line (start -7.25 -2.67) (end 7.25 -2.67) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
(fp_line (start 7.25 -2.67) (end 7.25 13.78) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
(fp_line (start 7.25 13.78) (end -7.25 13.78) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
(fp_line (start -7.25 13.78) (end -7.25 -2.67) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
(fp_line (start -4.5 -0.6) (end -4.5 0.6) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))
(pad "1" thru_hole rect (at -3.5 0) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "2" thru_hole circle (at -1 0) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "3" thru_hole circle (at 1 0) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "4" thru_hole circle (at 3.5 0) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "5" thru_hole circle (at 4 -1.5) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "6" thru_hole circle (at 2 -1.5) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "7" thru_hole circle (at 0 -1.5) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "8" thru_hole circle (at -2 -1.5) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "9" thru_hole circle (at -4 -1.5) (size 1.2 1.2) (drill 0.7) (layers "*.Cu" "*.Mask"))
(pad "SH" thru_hole circle (at -6.57 2) (size 3.3 3.3) (drill 2.3) (layers "*.Cu" "*.Mask"))
(pad "SH" thru_hole circle (at 6.57 2) (size 3.3 3.3) (drill 2.3) (layers "*.Cu" "*.Mask"))
(model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/Adam_Tech_USB-A3-S_2a7889.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)))
(fp_poly
(pts (xy -8.72 -0.15) (xy -7.75 -0.15) (xy -7.75 -3.17) (xy 7.75 -3.17) (xy 7.75 -0.15) (xy 8.72 -0.15) (xy 8.72 4.15) (xy 7.75 4.15) (xy 7.75 14.28) (xy -7.75 14.28) (xy -7.75 4.15) (xy -8.72 4.15))
(stroke (width 0.05) (type solid))
(fill no)
(layer "F.CrtYd")
)
)