main
Ray Publish 0.1.0 310e726
{
  "slug": "usb-a3-s-ra",
  "version": "0.1.0",
  "type": "component",
  "description": "Adam Tech Connectors, Interconnects. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "connectors, interconnects",
    "usb-a3-s-ra",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "usb-a3-s-ra.kicad_sym",
    "usb-a3-s-ra.kicad_mod",
    "usb-a3-s-ra.glb",
    "usb-a3-s-ra.step",
    "usb-a3-s-ra.lbr",
    "docs/hero.png",
    "docs/usb-a3-s-ra-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "usb-a3-s-ra-hero.glb",
    "usb-a3-s-ra-hero.overlay.json"
  ],
  "component": {
    "mpn": "USB-A3-S-RA",
    "land_source": "derived",
    "land_note": "Adam Tech USB-A3-S-RA drawing (rev C, 5/11/26) 'RECOMMENDED PCB LAYOUT' (inch [mm]): pin holes Ø.028 [0.70]; pins 1-4 in one row (1 at the left, 2.50 / 2.00 / 2.50 apart, symmetric about the centre line), pins 5-9 in a row .059 [1.50] behind them at .079 [2.00] pitch with 7 on the centre line, 9 at the left; two shell holes Ø.091 [2.30] .517 [13.14] apart, .079 [2.00] in front of the 1-4 row and .464 [11.78] from the connector (board) edge. Pad diameters are not printed: 1.2 for the Ø0.70 pins and 3.3 for the Ø2.30 shell holes (derived). Body 14.50 wide (.571), 16.45 deep (.648 REF), 7.12 high (.280); front at the connector edge.",
    "manufacturer": "Adam Tech",
    "package": "Unknown",
    "pin_count": 10,
    "category": "Connectors, Interconnects",
    "subcategory": "Connectors, Interconnects",
    "datasheet": "https://app.adam-tech.com/products/download/data_sheet/219132/usb-a3-s-ra-data-sheet.pdf",
    "parts": {
      "symbol": "usb-a3-s-ra.kicad_sym",
      "footprint": "usb-a3-s-ra.kicad_mod",
      "model_3d": "usb-a3-s-ra-hero.glb",
      "model_3d_plain": "usb-a3-s-ra.glb",
      "model_3d_step": "usb-a3-s-ra-etched.step",
      "model_3d_step_plain": "usb-a3-s-ra.step",
      "lbr": "usb-a3-s-ra.lbr"
    },
    "distributor_links": {
      "digikey": "2057-USB-A3-S-RA-ND",
      "mouser": "737-USB-A3-S-RA"
    },
    "distributor_check": {
      "checked_at": "2026-11-17T01:23:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2057-USB-A3-S-RA-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "737-USB-A3-S-RA",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBUS",
        "type": "power_in",
        "description": "VBUS (USB2.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "2",
        "name": "D-",
        "type": "bidirectional",
        "description": "D- (USB2.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "3",
        "name": "D+",
        "type": "bidirectional",
        "description": "D+ (USB2.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "GND (USB2.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "5",
        "name": "SSRX-",
        "type": "input",
        "description": "SSRX- (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "6",
        "name": "SSRX+",
        "type": "input",
        "description": "SSRX+ (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "7",
        "name": "GND_DRAIN",
        "type": "power_in",
        "description": "GND_DRAIN (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "8",
        "name": "SSTX-",
        "type": "output",
        "description": "SSTX- (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "9",
        "name": "SSTX+",
        "type": "output",
        "description": "SSTX+ (USB3.0 contact pin, per the drawing's CONNECTOR PIN SIGNAL NAME table)"
      },
      {
        "number": "SH",
        "name": "SHELL",
        "type": "passive",
        "description": "Shell (brass, nickel plated) mounting legs in the two Ø2.30 holes; connect to chassis/ground."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://app.adam-tech.com/products/download/data_sheet/219132/usb-a3-s-ra-data-sheet.pdf",
        "pages": 1,
        "sha256": "93fa9c588d9064a5",
        "source_tier": "mfr"
      },
      "cad": "Adom_Gen derived land; symbol and 3D generated",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "usb-a3-s-ra.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          15.04,
          16.45,
          10.12
        ],
        "zmin_mm": -3.0,
        "centre_offset_mm": 4.78,
        "footprint_binding": "identity",
        "sha256": "b5b760ab1f4087b6d3252e24bb618d1b14ed9c593e76542206f2a542c46b7959",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "usb-a3-s-ra-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          15.04,
          16.45,
          10.12
        ],
        "zmin_mm": -3.0,
        "centre_offset_mm": 4.78,
        "footprint_binding": "identity",
        "sha256": "bbd4cbce9838dbda29fd54e5e88dd78db0d2ec7c413f83dce6af51d91fe4f6ec",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}