main
Ray
Publish 0.1.0
5fb8228
URB2424LD-60WR3
YLPTEC · Power Modules · DIP-6
URB2424LD-60WR3 from YLPTEC, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Ctrl | input | Remote control: module on when floating or at TTL high 3V |
| 2 | GND | power_in | Input ground reference. |
| 3 | Vin | power_in | Positive input supply, 24VDC nominal with 9-36VDC range. |
| 4 | +Vo | power_out | Positive output, 24VDC for URB2424LD-60WR3 with 2500mA max load. |
| 5 | -Vo | power_out | Negative output / output return. |
| 6 | Trim | input | Output voltage trim pin, adjusted using external resistor to raise or lower output voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YLPTEC |
| Package | DIP-6 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | 9 | 24 | 36 | VDC | Nominal input 24 VDC | 1 | |
| Output voltage | Vout | 24 | VDC | 1 | |||
| Output current | Io | 0 | 2500 | mA | Min/max current per selection table | 1 | |
| Full-load efficiency | 93 | % | Full load | 1 | |||
| Maximum capacitive load | 2000 | µF | 1 | ||||
| Input current (full load) | 2717 | 2778 | mA | Nominal input voltage, full load | 1 | ||
| Input current (no load) | 25 | 30 | mA | Nominal input voltage, no load | 1 | ||
| Input surge voltage | -0.7 | 100 | VDC | 1 | |||
| Startup voltage | 18 | VDC | 1 | ||||
| Ctrl module on | 3 | 12 | V | Ctrl floating or TTL high | 1 | ||
| Ctrl module off | 0 | 1.2 | V | Ctrl to GND or low level | 1 | ||
| Output voltage accuracy | -2 | 1 | 2 | % | 5%-100% load; typ printed ±1.0 | 2 | |
| Line regulation | -0.5 | 0.2 | 0.5 | % | Full load, input from low to high voltage; typ printed ±0.2 | 2 | |
| Load regulation | -1 | 0.5 | 1 | % | 5%-100% load; typ printed ±0.5 | 2 | |
| Transient response deviation | -5 | 3 | 5 | % | Other outputs, 25% load step; typ printed ±3 | 2 | |
| Transient recovery time | 250 | 500 | μs | 25% load step, nominal input voltage | 2 | ||
| Ripple and noise | 100 | mVp-p | 20MHz bandwidth, nominal input, 5%-100% load | 2 | |||
| Overvoltage protection | 110 | 180 | %Vo | Input voltage range | 2 | ||
| Overcurrent protection | 110 | 200 | %Io | Input voltage range | 2 | ||
| Isolation voltage | 1600 | VDC | Input-output, 1 minute, leakage current less than 1mA | 2 | |||
| Insulation resistance | 1000 | MΩ | Input-output, 500VDC | 2 | |||
| Isolation capacitance | 2200 | pF | Input-output, 100KHz/0.1V | 2 | |||
| Operating temperature | -40 | 105 | ℃ | See Figure 1 | 2 | ||
| Storage temperature | -55 | 125 | ℃ | 2 | |||
| Storage humidity | 5 | 95 | %RH | Non-condensing | 2 | ||
| Pin soldering temperature | 300 | ℃ | 1.5mm from case, 10 seconds | 2 | |||
| Switching frequency | 310 | kHz | PWM mode | 2 |
CAD (KiCad official)
- Symbol:
URB2424LD-60WR3 - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
urb2424ld-60wr3-etched.step/urb2424ld-60wr3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);urb2424ld-60wr3.step/urb2424ld-60wr3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: YLPTEC datasheet (5 pp, sha256
fe6ab306906d0dc7, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# URB2424LD-60WR3
**YLPTEC** · Power Modules · DIP-6
URB2424LD-60WR3 from YLPTEC, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Ctrl | input | Remote control: module on when floating or at TTL high 3V~12V, off when tied to GND or low level 0V~1.2V. |
| 2 | GND | power_in | Input ground reference. |
| 3 | Vin | power_in | Positive input supply, 24VDC nominal with 9-36VDC range. |
| 4 | +Vo | power_out | Positive output, 24VDC for URB2424LD-60WR3 with 2500mA max load. |
| 5 | -Vo | power_out | Negative output / output return. |
| 6 | Trim | input | Output voltage trim pin, adjusted using external resistor to raise or lower output voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YLPTEC |
| Package | DIP-6 |
| Category | Power Management |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | | 9 | 24 | 36 | VDC | Nominal input 24 VDC | 1 |
| Output voltage | Vout | | 24 | | VDC | | 1 |
| Output current | Io | 0 | | 2500 | mA | Min/max current per selection table | 1 |
| Full-load efficiency | | | 93 | | % | Full load | 1 |
| Maximum capacitive load | | | | 2000 | µF | | 1 |
| Input current (full load) | | | 2717 | 2778 | mA | Nominal input voltage, full load | 1 |
| Input current (no load) | | | 25 | 30 | mA | Nominal input voltage, no load | 1 |
| Input surge voltage | | -0.7 | | 100 | VDC | | 1 |
| Startup voltage | | | | 18 | VDC | | 1 |
| Ctrl module on | | 3 | | 12 | V | Ctrl floating or TTL high | 1 |
| Ctrl module off | | 0 | | 1.2 | V | Ctrl to GND or low level | 1 |
| Output voltage accuracy | | -2 | 1 | 2 | % | 5%-100% load; typ printed ±1.0 | 2 |
| Line regulation | | -0.5 | 0.2 | 0.5 | % | Full load, input from low to high voltage; typ printed ±0.2 | 2 |
| Load regulation | | -1 | 0.5 | 1 | % | 5%-100% load; typ printed ±0.5 | 2 |
| Transient response deviation | | -5 | 3 | 5 | % | Other outputs, 25% load step; typ printed ±3 | 2 |
| Transient recovery time | | | 250 | 500 | μs | 25% load step, nominal input voltage | 2 |
| Ripple and noise | | | 100 | | mVp-p | 20MHz bandwidth, nominal input, 5%-100% load | 2 |
| Overvoltage protection | | 110 | | 180 | %Vo | Input voltage range | 2 |
| Overcurrent protection | | 110 | | 200 | %Io | Input voltage range | 2 |
| Isolation voltage | | 1600 | | | VDC | Input-output, 1 minute, leakage current less than 1mA | 2 |
| Insulation resistance | | 1000 | | | MΩ | Input-output, 500VDC | 2 |
| Isolation capacitance | | | 2200 | | pF | Input-output, 100KHz/0.1V | 2 |
| Operating temperature | | -40 | | 105 | ℃ | See Figure 1 | 2 |
| Storage temperature | | -55 | | 125 | ℃ | | 2 |
| Storage humidity | | 5 | | 95 | %RH | Non-condensing | 2 |
| Pin soldering temperature | | | | 300 | ℃ | 1.5mm from case, 10 seconds | 2 |
| Switching frequency | | | 310 | | kHz | PWM mode | 2 |
## CAD (KiCad official)
- Symbol: `URB2424LD-60WR3`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `urb2424ld-60wr3-etched.step` / `urb2424ld-60wr3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `urb2424ld-60wr3.step` / `urb2424ld-60wr3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [YLPTEC datasheet](docs/urb2424ld-60wr3-datasheet.pdf) (5 pp, sha256 `fe6ab306906d0dc7`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/urb2424ld-60wr3-datasheet.pdf)