Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UM202EESE

Union Semiconductor · RS232 ICs · SOIC-16

UM202EESE from Union Semiconductor, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the charge pump capacitor C1, which connects to the internal charge pump with 0.1μF typical value.
2 V+ power_out Generated +2VCC voltage output of the charge pump, which can supply a small load but reduces driver swing and noise margin when drawn.
3 C1- passive Negative terminal of the charge pump capacitor C1, which connects to the internal charge pump with 0.1μF typical value.
4 C2+ passive Positive terminal of the charge pump capacitor C2, which connects to the internal charge pump with 0.1μF typical value.
5 C2- passive Negative terminal of the charge pump capacitor C2, which connects to the internal charge pump with 0.1μF typical value.
6 V- power_out Generated -2VCC voltage output of the charge pump, which can supply a small load but reduces driver swing and noise margin when drawn.
7 T_OUT output RS-232 driver output that is protected against infinite short-circuits to ground and swings typically ±9V, guaranteed ±5V at 3kΩ and 2500pF.
8 R_IN input RS-232 receiver input protected to ±30V with a 5kΩ pull-down, which holds the receiver output high when the pin floats.
9 R_OUT output TTL/CMOS-compatible receiver output giving the inverted logic level of the RS-232 input, with VOH of at least VCC-0.4V at -1.0mA.
10 T_IN input TTL/CMOS-compatible driver input with thresholds of 0.8V low maximum and 2.0V high minimum that drives the inverted RS-232 output.
11 T_IN input TTL/CMOS-compatible driver input with thresholds of 0.8V low maximum and 2.0V high minimum that drives the inverted RS-232 output.
12 R_OUT output TTL/CMOS-compatible receiver output giving the inverted logic level of the RS-232 input, with VOH of at least VCC-0.4V at -1.0mA.
13 R_IN input RS-232 receiver input protected to ±30V with a 5kΩ pull-down, which holds the receiver output high when the pin floats.
14 T_OUT output RS-232 driver output that is protected against infinite short-circuits to ground and swings typically ±9V, guaranteed ±5V at 3kΩ and 2500pF.
15 GND power_in Ground reference for the device supply and logic.
16 VCC power_in Single supply input of +4.5V to +5.5V, with VCC bypassed to ground by at least 0.1μF.

Key specifications

Parameter Value
Manufacturer Union Semiconductor
Package SOIC-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Supply Current ICC 10 15 mA No Load, TA=+25°C 4
Input Leakage Current -10 10 μA T_IN=0V to VCC 4
Input Threshold Low VIL 0.8 V T_IN 4
Input Threshold High VIH 2 V T_IN 4
Output Voltage Low VOL 0.4 V R_OUT; IOUT=3.2mA 4
Output Voltage High VOH 3.5 V R_OUT; IOUT=-1.0mA 4
Output Leakage Current -10 0.05 10 μA 0V≤ROUT≤VCC 4
Input Voltage Range -30 30 V EIA/TIA-232E receiver inputs 4
Receiver Input Threshold Low 0.8 1.2 V TA=+25°C, VCC=5V, Normal Operation 4
Receiver Input Threshold High 1.7 2.4 V TA=+25°C, VCC=5V, Normal Operation 4
Input Hysteresis 0.2 0.5 1 V VCC=5V 4
Input Resistance 3 5 7 kΩ TA=+25°C, VCC=5V 4
Output Voltage Swing -5 9 V All drivers loaded with 3kΩ to ground 4
Output Resistance 300 Ω VCC=V+=V-=0V, VOUT=±2V 4
Output Short-Circuit Current -70 70 mA Short to VCC, GND or Other TXD Pin 4
Maximum Data Rate 250 kbps RL=3kΩ to 7kΩ, CL=50pF to 1000pF, One Transmitter Switching 4
Receiver Propagation Delay tPLHR, tPHLR 0.3 μs CL=150pF, All Parts, Normal Operation 4
Transmitter Propagation Delay tPLHT, tPHLT 1.2 μs RL=3kΩ, CL=2500pF, All Transmitters Loaded 4
Transition-Region Slew Rate 20 30 30 V/μs TA=+25°C, VCC=5V, RL=3kΩ to 7kΩ, CL=50pF to 1000pF, measured from -3V to +3V or +3V to -3V, Figure 1 4
ESD Protection Voltage, Human Body Model -15 15 kV Transmitter outputs, receiver inputs 4
ESD Protection Voltage, IEC61000-4-2 Contact Discharge -8 8 kV IEC61000-4-2 contact discharge; transmitter outputs, receiver inputs 4
ESD Protection Voltage, IEC61000-4-2 Air-Gap Discharge -15 15 kV IEC61000-4-2 air-gap discharge; transmitter outputs, receiver inputs 4
Supply Voltage on VCC VCC -0.3 6 V 3
Voltage on V+ V+ 14 V Printed as (VCC-0.3) to +14 3
Voltage on V- V- -14 0.3 V 3
Voltage on T_IN T_IN -0.3 V Printed as -0.3 to (VCC+0.3) 3
Voltage on R_IN R_IN -30 30 V 3
Voltage on R_OUT R_OUT -0.3 V Printed as -0.3 to (VCC+0.3) 3
Continuous Power Dissipation PD 696 mW TA=70°C, SOP16 3
Operating Temperature Range TA -40 85 °C 3
Storage Temperature Range TSTG -65 165 °C 3
Maximum Lead Temperature for Soldering TL 300 °C 10 seconds 3
Supply Voltage (VCC) VCC 4.5 5 5.5 V Supply voltage input, pin 16 3
Charge-Pump Capacitors C1-C4 C1-C4 0.1 10 μF Charge-pump capacitors; ceramic suggested for 0.1μF 5

CAD (KiCad official)

  • Symbol: UM202EESE
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: um202eese-etched.step / um202eese-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); um202eese.step / um202eese.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Union Semiconductor datasheet (11 pp, sha256 2702a52594402c2e, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF