main
History Download
Ray Publish 0.1.0 e35c9d1

ULN2803AG

LANKE · Darlington Transistor Arrays · SOP-18-300mil

ULN2803AG from LANKE, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1B input Base input of Darlington channel 1, TTL/CMOS compatible through a 2.7 kΩ base resistor, with the output on at VIN ≥ 2.8 V and off at VIN ≤ 0.7 V and a recommended control input range of 0 to 24 V.
2 2B input Base input of Darlington channel 2, TTL/CMOS compatible through a 2.7 kΩ base resistor, with the output on at VIN ≥ 2.8 V and off at VIN ≤ 0.7 V and a recommended control input range of 0 to 24 V.
3 3B input Base input of Darlington channel 3, TTL/CMOS compatible through a 2.7 kΩ base resistor, with the output on at VIN ≥ 2.8 V and off at VIN ≤ 0.7 V and a recommended control input range of 0 to 24 V.
4 4B input Base input of Darlington channel 4, TTL/CMOS compatible through a 2.7 kΩ base resistor, with the output on at VIN ≥ 2.8 V and off at VIN ≤ 0.7 V and a recommended control input range of 0 to 24 V.
5 5B input Base input of Darlington channel 5, TTL/CMOS compatible through a 2.7 kΩ base resistor, with the output on at VIN ≥ 2.8 V and off at VIN ≤ 0.7 V and a recommended control input range of 0 to 24 V.
6 6B input Base input of Darlington channel 6, TTL/CMOS compatible through a 2.7 kΩ base resistor, with the output on at VIN ≥ 2.8 V and off at VIN ≤ 0.7 V and a recommended control input range of 0 to 24 V.
7 7B input Base input of Darlington channel 7, TTL/CMOS compatible through a 2.7 kΩ base resistor, with the output on at VIN ≥ 2.8 V and off at VIN ≤ 0.7 V and a recommended control input range of 0 to 24 V.
8 8B input Base input of Darlington channel 8, TTL/CMOS compatible through a 2.7 kΩ base resistor, with the output on at VIN ≥ 2.8 V and off at VIN ≤ 0.7 V and a recommended control input range of 0 to 24 V.
9 E power_in Common emitter (ground) of all eight Darlington channels, to be connected to system ground.
10 COM power_in Common terminal of the internal clamp diodes for inductive loads, with a clamp diode reverse voltage of 50 V and forward peak current of 350 mA in recommended operation.
11 8C output Open-collector Darlington output of channel 8, with collector-emitter voltage up to 50 V and collector peak current up to 500 mA per channel.
12 7C output Open-collector Darlington output of channel 7, with collector-emitter voltage up to 50 V and collector peak current up to 500 mA per channel.
13 6C output Open-collector Darlington output of channel 6, with collector-emitter voltage up to 50 V and collector peak current up to 500 mA per channel.
14 5C output Open-collector Darlington output of channel 5, with collector-emitter voltage up to 50 V and collector peak current up to 500 mA per channel.
15 4C output Open-collector Darlington output of channel 4, with collector-emitter voltage up to 50 V and collector peak current up to 500 mA per channel.
16 3C output Open-collector Darlington output of channel 3, with collector-emitter voltage up to 50 V and collector peak current up to 500 mA per channel.
17 2C output Open-collector Darlington output of channel 2, with collector-emitter voltage up to 50 V and collector peak current up to 500 mA per channel.
18 1C output Open-collector Darlington output of channel 1, with collector-emitter voltage up to 50 V and collector peak current up to 500 mA per channel.

Key specifications

Parameter Value
Manufacturer LANKE
Package SOP-18-300mil
Category Transistors
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-emitter voltage VCE -0.5 50 V TA=25℃ 3
COM terminal voltage VCOM 50 V TA=25℃ 3
Input voltage VI -0.5 30 V TA=25℃ 3
Collector peak current ICP 500 mA/ch TA=25℃ 3
Output clamp diode forward peak current IOK 500 mA TA=25℃ 3
Total emitter peak current IET -2.5 A TA=25℃; printed as -2.5 in the table 3
Maximum operating junction temperature TJ 150 ℃ TA=25℃ 3
Soldering temperature 260 ℃ 10s 3
Storage temperature range Tstg -60 150 ℃ 3
Power dissipation, SOP18 package (first printed value) PD 0.54 W SOP18; see note 1-3 (PCB: glass epoxy 30x30x1.6mm, 50% copper); slash-separated pair 0.54/0.625 3
Power dissipation, SOP18 package (second printed value) PD 0.625 W SOP18; see note 1-3 (PCB: glass epoxy 30x30x1.6mm, 50% copper); slash-separated pair 0.54/0.625 3
Collector-emitter voltage (recommended) VCE 0 50 V TA=25℃ 3
Output current, duty 10% IOUT 0 233 mA/ch TPW=25ms, TA=85℃, TJ=120℃, Duty=10% 3
Output current, duty 50% IOUT 0 70 mA/ch Duty=50% 3
Control signal input voltage VIN 0 24 V 3
Input voltage, output on VIN(ON) 2.8 24 V Iout=400mA, hFE=800 3
Input voltage, output off VIN(OFF) 0 0.7 V 3
Clamp diode reverse voltage VR 50 V 3
Clamp diode forward peak current IF 350 mA 3
Operating temperature range TA -40 85 ℃ 3
Power dissipation, SOP18 package PD 0.325 W TA=85℃, SOP18 on glass epoxy PCB (30x30x1.6mm, 50% copper) 3
On-state input voltage VI(ON) 1.9 2.4 V VCE=2V, IC=200mA; figure 4; two printed values read as min and max (column not explicit) 4
On-state input voltage VI(ON) 2 2.7 V VCE=2V, IC=250mA; figure 4; two printed values read as min and max (column not explicit) 4
On-state input voltage VI(ON) 2.1 3 V VCE=2V, IC=300mA; figure 4; two printed values read as min and max (column not explicit) 4
Collector-emitter saturation voltage VCE(SAT) 0.78 V VI=2.4V, IC=30mA; figure 5; single printed value, column not explicit 4
Collector-emitter saturation voltage VCE(SAT) 0.82 V VI=2.4V, IC=60mA; figure 5; single printed value, column not explicit 4
Collector-emitter saturation voltage VCE(SAT) 0.9 V VI=2.4V, IC=120mA; figure 5; single printed value, column not explicit 4
Collector-emitter saturation voltage VCE(SAT) 1.1 V VI=2.4V, IC=240mA; figure 5; single printed value, column not explicit 4
Collector-emitter saturation voltage VCE(SAT) 1.25 V VI=2.4V, IC=350mA; figure 5; single printed value, column not explicit 4
Clamp diode forward voltage VF 1.4 1.6 V IF=350mA; figure 8; two printed values read as min and max (column not explicit) 4
Collector off-state leakage current ICEX 50 μA VCE=50V, II=0; figure 1 4
Collector off-state leakage current ICEX 100 μA VCE=50V, TA=85℃, VI=0V; figure 2 4
Input current II 4 mA VIN=12V, IC=60mA; figure 4; single printed value, column not explicit 4
Input current II 1.7 mA VIN=6V; figure 4; single printed value, column not explicit 4
Input current II 1.1 mA VIN=4.5V; figure 4; single printed value, column not explicit 4
Input current II 0.35 mA VIN=2.4V; figure 4; single printed value, column not explicit 4
Clamp diode reverse current IR 100 μA VR=50V; figure 7 4
Input capacitance CIN 15 pF 4
Propagation delay, low-to-high tPLH 0.15 1 μs VL=12V, RL=45Ω; figure 9 4
Propagation delay, high-to-low tPHL 0.15 1 μs VL=12V, RL=45Ω; figure 9 4

CAD (KiCad official)

  • Symbol: ULN2803AG
  • Footprint: Package_SO:SOP-18_7.495x11.515mm_P1.27mm
  • 3D model: SOP-18-300mil, generated on the KiCad land (body 7.5 x 11.45 mm, terminals on the pads, 2.65 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: uln2803ag-etched.step / uln2803ag-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uln2803ag.step / uln2803ag.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LANKE datasheet (8 pp, sha256 96c4e3916319a904, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF