Generated by kicad-footprint-generator · KiCad file format 20260206
ULN2803ADWMRG
HANSCHIP semiconductor · Darlington Transistor Arrays · SOP-18-300mil
ULN2803ADWMRG from HANSCHIP semiconductor, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Darlington input for channel 1; the datasheet specifies a 2.7 kΩ series base resistor and direct compatibility with TTL and 5 V CMOS logic, with absolute input voltage limited to -0.5 to 30 V. |
| 2 | IN2 | input | Darlington input for channel 2; the datasheet specifies a 2.7 kΩ series base resistor and direct compatibility with TTL and 5 V CMOS logic, with absolute input voltage limited to -0.5 to 30 V. |
| 3 | IN3 | input | Darlington input for channel 3; the datasheet specifies a 2.7 kΩ series base resistor and direct compatibility with TTL and 5 V CMOS logic, with absolute input voltage limited to -0.5 to 30 V. |
| 4 | IN4 | input | Darlington input for channel 4; the datasheet specifies a 2.7 kΩ series base resistor and direct compatibility with TTL and 5 V CMOS logic, with absolute input voltage limited to -0.5 to 30 V. |
| 5 | IN5 | input | Darlington input for channel 5; the datasheet specifies a 2.7 kΩ series base resistor and direct compatibility with TTL and 5 V CMOS logic, with absolute input voltage limited to -0.5 to 30 V. |
| 6 | IN6 | input | Darlington input for channel 6; the datasheet specifies a 2.7 kΩ series base resistor and direct compatibility with TTL and 5 V CMOS logic, with absolute input voltage limited to -0.5 to 30 V. |
| 7 | IN7 | input | Darlington input for channel 7; the datasheet specifies a 2.7 kΩ series base resistor and direct compatibility with TTL and 5 V CMOS logic, with absolute input voltage limited to -0.5 to 30 V. |
| 8 | IN8 | input | Darlington input for channel 8; the datasheet specifies a 2.7 kΩ series base resistor and direct compatibility with TTL and 5 V CMOS logic, with absolute input voltage limited to -0.5 to 30 V. |
| 9 | GND | power_in | Ground pin common to all Darlington channels. |
| 10 | COM | bidirectional | Common cathode of the internal clamp diodes for inductive loads; the datasheet limits clamp diode reverse voltage to 55 V and forward current to 25 mA. |
| 11 | OUT8 | output | Open-collector Darlington output for channel 8; continuous output current is rated to 500 mA and output voltage to 50 V. |
| 12 | OUT7 | output | Open-collector Darlington output for channel 7; continuous output current is rated to 500 mA and output voltage to 50 V. |
| 13 | OUT6 | output | Open-collector Darlington output for channel 6; continuous output current is rated to 500 mA and output voltage to 50 V. |
| 14 | OUT5 | output | Open-collector Darlington output for channel 5; continuous output current is rated to 500 mA and output voltage to 50 V. |
| 15 | OUT4 | output | Open-collector Darlington output for channel 4; continuous output current is rated to 500 mA and output voltage to 50 V. |
| 16 | OUT3 | output | Open-collector Darlington output for channel 3; continuous output current is rated to 500 mA and output voltage to 50 V. |
| 17 | OUT2 | output | Open-collector Darlington output for channel 2; continuous output current is rated to 500 mA and output voltage to 50 V. |
| 18 | OUT1 | output | Open-collector Darlington output for channel 1; continuous output current is rated to 500 mA and output voltage to 50 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-18-300mil |
| Category | Transistors |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | -0.5 | 30 | V | 3 | ||
| Output voltage | VOUT | -0.5 | 50 | V | 3 | ||
| Clamp diode reverse voltage | VR | 55 | V | 3 | |||
| Collector (output) continuous current per channel | IOUT | 500 | mA | 3 | |||
| Clamp diode forward current | IF | 25 | mA | 3 | |||
| Storage temperature | TSTG | -55 | 150 | °C | 3 | ||
| Operating temperature | TOPR | -40 | 85 | °C | 3 | ||
| Junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Lead temperature (soldering, 10 s) | TLEAD | 245 | °C | 10 s soldering | 3 | ||
| Output leakage current | ICEX | 20 | uA | TA=25°C, VCE=50V | 3 | ||
| Output leakage current | ICEX | 100 | uA | TA=85°C, VCE=50V | 3 | ||
| Collector-emitter saturation voltage | VCE(sat) | 1.3 | 1.6 | V | IOUT=350mA, IIN=500 uA | 3 | |
| Collector-emitter saturation voltage | VCE(sat) | 1.1 | 1.3 | V | IOUT=250mA, IIN=350 uA | 3 | |
| Collector-emitter saturation voltage | VCE(sat) | 0.9 | 1.1 | V | IOUT=100mA, IIN=250 uA | 3 | |
| On-state input current | II(ON) | 0.93 | 1.35 | mA | VI=3.85V | 3 | |
| Off-state input current | II(OFF) | 50 | 100 | uA | TA=+25°C, IC=500uA | 3 | |
| Off-state input current | II(OFF) | 25 | 50 | uA | TA=+85°C, IC=500uA | 3 | |
| On-state input voltage | VI(ON) | 2.4 | V | VCE=2.0V, IC=200mA | 3 | ||
| On-state input voltage | VI(ON) | 2.7 | V | VCE=2.0V, IC=250mA | 3 | ||
| On-state input voltage | VI(ON) | 3 | V | VCE=2.0V, IC=300mA | 3 | ||
| Input capacitance | CI | 15 | 30 | pF | 3 | ||
| Turn-on delay time | tMH | 1 | µS | VOUT=50V, RL=130Ω | 3 | ||
| Turn-off delay time | tML | 1 | µS | VOUT=50V, RL=130Ω | 3 | ||
| Clamp diode leakage current | IR | 10 | µA | TA=+25°C, VR=50V | 3 | ||
| Clamp diode leakage current | IR | 50 | µA | TA=+85°C, VR=50V | 3 | ||
| Clamp diode forward voltage | VF | 1.7 | 2 | V | IF=350mA | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ULN2803ADWMRG - Footprint:
Package_SO:SOP-18_7.495x11.515mm_P1.27mm - 3D model: SOP-18-300mil, generated on the KiCad land (body 7.5 x 11.45 mm, terminals on the pads, 2.3 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
uln2803adwmrg-etched.step/uln2803adwmrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);uln2803adwmrg.step/uln2803adwmrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (8 pp, sha256
2601824b79fe6c01, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).