Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ULN2802A

STMicroelectronics · Darlington Transistor Arrays · DIP-18

ULN2802A from STMicroelectronics, in a DIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN 1 input Darlington driver 1 input with 10.5 kΩ input resistor and Zener for 14-25 V PMOS; absolute maximum input voltage 30 V.
2 IN 2 input Darlington driver 2 input with 10.5 kΩ input resistor and Zener for 14-25 V PMOS; absolute maximum input voltage 30 V.
3 IN 3 input Darlington driver 3 input with 10.5 kΩ input resistor and Zener for 14-25 V PMOS; absolute maximum input voltage 30 V.
4 IN 4 input Darlington driver 4 input with 10.5 kΩ input resistor and Zener for 14-25 V PMOS; absolute maximum input voltage 30 V.
5 IN 5 input Darlington driver 5 input with 10.5 kΩ input resistor and Zener for 14-25 V PMOS; absolute maximum input voltage 30 V.
6 IN 6 input Darlington driver 6 input with 10.5 kΩ input resistor and Zener for 14-25 V PMOS; absolute maximum input voltage 30 V.
7 IN 7 input Darlington driver 7 input with 10.5 kΩ input resistor and Zener for 14-25 V PMOS; absolute maximum input voltage 30 V.
8 IN 8 input Darlington driver 8 input with 10.5 kΩ input resistor and Zener for 14-25 V PMOS; absolute maximum input voltage 30 V.
9 GND power_in Ground, common emitters of all eight Darlington transistors.
10 COMMON FREE WHEELING DIODES passive Common cathode of the integral suppression (clamp) diodes, connected to the positive load supply; diode forward current 350 mA, reverse voltage 50 V.
11 OUT 8 output Darlington driver 8 open-collector output, 500 mA continuous (600 mA peak) and 50 V maximum.
12 OUT 7 output Darlington driver 7 open-collector output, 500 mA continuous (600 mA peak) and 50 V maximum.
13 OUT 6 output Darlington driver 6 open-collector output, 500 mA continuous (600 mA peak) and 50 V maximum.
14 OUT 5 output Darlington driver 5 open-collector output, 500 mA continuous (600 mA peak) and 50 V maximum.
15 OUT 4 output Darlington driver 4 open-collector output, 500 mA continuous (600 mA peak) and 50 V maximum.
16 OUT 3 output Darlington driver 3 open-collector output, 500 mA continuous (600 mA peak) and 50 V maximum.
17 OUT 2 output Darlington driver 2 open-collector output, 500 mA continuous (600 mA peak) and 50 V maximum.
18 OUT 1 output Darlington driver 1 open-collector output, 500 mA continuous (600 mA peak) and 50 V maximum.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DIP-18
Category Transistors/Thyristors
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VO 50 V 5
Input voltage (for ULN2802A) VI 30 V 5
Continuous collector current IC 500 mA 5
Continuous base current IB 25 mA 5
Power dissipation (one Darlington pair) PTOT 1 W one Darlington pair 5
Power dissipation (total package) PTOT 2.25 W total package 5
Operating ambient temperature range TA -20 85 °C 5
Storage temperature range TSTG -55 150 °C 5
Junction temperature TJ -20 150 °C 5
Thermal resistance junction-ambient RthJA 55 °C/W single value printed in Table 3 (no min/typ/max column designation) 5
Output leakage current ICEX 50 µA TA = 70 °C, VCE = 50 V (Figure 3) 6
Output leakage current (ULN2802A) ICEX 100 µA TA = 70 °C for ULN2802A, VCE = 50 V, VI = 6 V (Figure 4) 6
Collector-emitter saturation voltage VCE(SAT) 0.9 1.1 V IC = 100 mA, IB = 250 µA (Figure 5) 6
Collector-emitter saturation voltage VCE(SAT) 1.1 1.3 V IC = 200 mA, IB = 350 µA (Figure 5) 6
Collector-emitter saturation voltage VCE(SAT) 1.3 1.6 V IC = 350 mA, IB = 500 µA (Figure 5) 6
Input current (ON), ULN2802A II(ON) 0.82 1.25 mA for ULN2802A, VI = 17 V (Figure 6) 6
Input current (OFF) II(OFF) 50 65 µA TA = 70 °C, IC = 500 µA (Figure 7) 6
Input voltage (ON), ULN2802A VI(ON) 13 V VCE = 2 V, for ULN2802A, IC = 300 mA (Figure 8) 6
Input capacitance CI 15 25 pF 6
Turn-on delay time tPLH 0.25 1 µs 0.5 VI to 0.5 VO 6
Turn-off delay time tPHL 0.25 1 µs 0.5 VI to 0.5 VO 6
Clamp diode leakage current IR 50 µA VR = 50 V (Figure 9) 6
Clamp diode leakage current IR 100 µA TA = 70 °C, VR = 50 V (Figure 9) 6
Clamp diode forward voltage VF 1.7 2 V IF = 350 mA (Figure 10) 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper All types are supplied in an 18-lead plastic DIP with a copper lead form and feature the 1

CAD (KiCad official)

  • Symbol: ULN2802A
  • Footprint: Package_DIP:DIP-18_W7.62mm
  • 3D model: DIP-18 (KiCad packages3D, STEP)
  • 3D model files: uln2802a-etched.step / uln2802a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uln2802a.step / uln2802a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (14 pp, sha256 78d49085c6e74186, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF