main
Ray
Publish 0.1.0
44f09fe
UCD3138ARMHR
Texas Instruments · Monitors & Reset Circuits · WQFN-40(6x6)
UCD3138ARMHR from Texas Instruments, in a WQFN-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground. |
| 2 | AD13 | input | 12-bit ADC channel 13, connected to comparator E and I-share. |
| 3 | AD06 | input | 12-bit ADC channel 6, connected to comparator F. |
| 4 | AD04 | input | 12-bit ADC channel 4, connected to comparator D. |
| 5 | AD03 | input | 12-bit ADC channel 3, connected to comparators B and C. |
| 6 | DGND | power_in | Digital ground. |
| 7 | RESET | input | Device reset input, active low. |
| 8 | ADC_EXT_TRIG | bidirectional | ADC conversion external trigger input; alternate functions TCAP, SYNC, PWM0; configurable as GPIO. |
| 9 | PMBUS_CLK | bidirectional | PMBus clock (open drain); alternate function SCI_TX0; configurable as GPIO. |
| 10 | PMBUS_DATA | bidirectional | PMBus data (open drain); alternate function SCI_RX0; configurable as GPIO. |
| 11 | DPWM0A | output | DPWM 0A output; configurable as GPIO. |
| 12 | DPWM0B | output | DPWM 0B output; configurable as GPIO. |
| 13 | DPWM1A | output | DPWM 1A output; configurable as GPIO. |
| 14 | DPWM1B | output | DPWM 1B output; configurable as GPIO. |
| 15 | DPWM2A | output | DPWM 2A output; configurable as GPIO. |
| 16 | DPWM2B | output | DPWM 2B output; configurable as GPIO. |
| 17 | DPWM3A | output | DPWM 3A output; configurable as GPIO. |
| 18 | DPWM3B | output | DPWM 3B output; configurable as GPIO. |
| 19 | PMBUS_ALERT | bidirectional | PMBus alert (open drain); configurable as GPIO. |
| 20 | PMBUS_CTRL | bidirectional | PMBus control (open drain); configurable as GPIO. |
| 21 | TCK | bidirectional | JTAG TCK; alternate functions TCAP, SYNC, PWM0, DTC0; configurable as GPIO. |
| 22 | TDO | bidirectional | JTAG TDO; alternate functions SCI_TX0, PMBUS_ALERT, FAULT0, DTC1; configurable as GPIO. |
| 23 | TDI | bidirectional | JTAG TDI; alternate functions SCI_RX0, PMBUS_CTRL, FAULT1, DTC0; configurable as GPIO. |
| 24 | TMS | bidirectional | JTAG TMS; configurable as GPIO. |
| 25 | FAULT2 | input | External fault input 2; configurable as GPIO. |
| 26 | DGND | power_in | Digital ground. |
| 27 | V33D | power_in | Digital 3.3 V core supply (3 V to 3.6 V recommended). |
| 28 | BP18 | passive | 1.8 V bypass pin (1.6 V to 2 V recommended operating range). |
| 29 | AGND | power_in | Substrate analog ground. |
| 30 | AGND | power_in | Analog ground. |
| 31 | EAP0 | input | Channel 0 differential analog voltage, positive input. |
| 32 | EAN0 | input | Channel 0 differential analog voltage, negative input. |
| 33 | EAP1 | input | Channel 1 differential analog voltage, positive input. |
| 34 | EAN1 | input | Channel 1 differential analog voltage, negative input. |
| 35 | EAP2 | input | Channel 2 differential analog voltage, positive input (recommended for peak current mode control). |
| 36 | AGND | power_in | Analog ground. |
| 37 | V33A | power_in | Analog 3.3 V supply (3 V to 3.6 V recommended). |
| 38 | AD00 | input | 12-bit ADC channel 0, connected to current source. |
| 39 | AD01 | input | 12-bit ADC channel 1, connected to current source. |
| 40 | AD02 | input | 12-bit ADC channel 2, connected to comparator A and I-share. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-40(6x6) |
| Category | Power Supply Chip |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V33D to DGND | V33D | -0.3 | 3.8 | V | 12 | ||
| V33DIO to DGND | V33DIO | -0.3 | 3.8 | V | 12 | ||
| V33A to AGND | V33A | -0.3 | 3.8 | V | 12 | ||
| BP18 to DGND | BP18 | -0.3 | 2.5 | V | 12 | ||
| Ground difference /DGND, AGND/ | 0.3 | V | 12 | ||||
| Voltage applied to all pins, excluding AGND | -0.3 | 3.8 | V | Referenced to DGND | 12 | ||
| Junction temperature | TJ | -40 | 150 | °C | 12 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 12 | ||
| Digital power | V33D | 3 | 3.3 | 3.6 | V | 12 | |
| Digital I/O power | V33DIO | 3 | 3.3 | 3.6 | V | 12 | |
| Analog power | V33A | 3 | 3.3 | 3.6 | V | 12 | |
| Junction temperature | TJ | -40 | 125 | °C | 12 | ||
| 1.8-V digital power | BP18 | 1.6 | 1.8 | 2 | V | 12 | |
| ESD HBM | V(ESD) | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001 | 12 | |
| ESD CDM | V(ESD) | -500 | 500 | V | JESD22-C101 | 12 | |
| Junction-to-ambient thermal resistance (40-pin QFN RMH) | RθJA | 31 | °C/W | 15 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 16.5 | °C/W | 15 | |||
| Junction-to-board thermal resistance | RθJB | 6.3 | °C/W | 15 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 1.1 | °C/W | 15 | |||
| Supply current V33A | I33A | 6.3 | mA | Measured on V33A. Device powered up but all ADC12 and EADC sampling disabled | 13 | ||
| Supply current V33DIO | I33DIO | 0.35 | mA | All GPIO and communication pins open | 13 | ||
| Supply current V33D ROM execution | I33D | 60 | mA | ROM program execution | 13 | ||
| Supply current V33D flash programming | I33D | 70 | mA | Flash programming in ROM mode | 13 | ||
| Supply current all DPWMs at 2 MHz | I33 | 105 | mA | ROM mode, all DPWMs enabled and switching at 2 MHz, unloaded | 13 | ||
| EAP, AGND input range | -0.15 | 1.998 | V | 13 | |||
| EAP, EAN input range | -0.256 | 1.848 | V | 13 | |||
| EADC digital resolution AFE=3 | 0.8 | 1 | 1.2 | mV | AFE = 3 | 13 | |
| EADC digital resolution AFE=2 | 1.7 | 2 | 2.3 | mV | AFE = 2 | 13 | |
| EADC digital resolution AFE=1 | 3.55 | 4 | 4.45 | mV | AFE = 1 | 13 | |
| EADC digital resolution AFE=0 | 6.9 | 8 | 9.1 | mV | AFE = 0 | 13 | |
| Input impedance | REA | 0.5 | MΩ | AGND reference | 13 | ||
| Input offset current | IOFFSET | -5 | 5 | μA | 13 | ||
| EADC offset AFE=0 | -2 | 2 | LSB | Input voltage = 0 V at AFE = 0 | 13 | ||
| EADC offset AFE=1 | -2.5 | 2.5 | LSB | Input voltage = 0 V at AFE = 1 | 13 | ||
| EADC offset AFE=3 | -4 | 4 | LSB | Input voltage = 0 V at AFE = 3 | 13 | ||
| DAC INL | INL | -3 | 3 | LSB | 13 | ||
| DAC DNL | DNL | -2.1 | 1.6 | LSB | Does not include MSB transition | 13 | |
| DAC reference voltage | 1.58 | 1.61 | V | 13 | |||
| PMBus address pin bias current | IBIAS | 9.5 | 10.5 | μA | 13 | ||
| Internal ADC reference voltage | 2.475 | 2.5 | 2.525 | V | -40°C to 125°C | 13 | |
| ADC12 INL end point | INL | -3.9 | 2 | 4.5 | LSB | 14 | |
| ADC12 INL best fit | INL | -2.3 | 1.5 | 2.6 | LSB | ADC_SAMPLINGSEL = 0 to 6 for all ADC12 data | 14 |
| ADC Zero Scale Error | -7 | 7 | mV | 14 | |||
| ADC Full Scale Error | -35 | 35 | mV | 14 | |||
| Watchdog time out range | TWD | 14.6 | 17 | 20.5 | ms | Total time is TWD × (WDCTRL.PERIOD + 1) | 14 |
| Internal oscillator frequency | f(PCLK) | 240 | 250 | 260 | MHz | 14 | |
| Current share current source | ISHARE | 238 | 259 | μA | See Figure 6-21 | 14 | |
| Current share resistor | RSHARE | 9.75 | 10.3 | kΩ | See Figure 6-21 | 14 | |
| High-level input voltage | VIH | 2.1 | V | V33DIO = 3 V | 14 | ||
| Low-level input voltage | VIL | 1.1 | V | V33DIO = 3 V | 14 | ||
| Voltage good high | VGH | 2.7 | V | 15 | |||
| Voltage good low | VGL | 2.5 | V | 15 | |||
| Brownout threshold | 2.9 | V | Internal signal warning of brownout conditions | 15 | |||
| Temperature sensor accuracy | -10 | 5 | 10 | ºC | -40°C to 125°C | 15 | |
| Comparator reference voltage | 2.478 | 2.5 | 2.513 | V | 15 | ||
| Comparator offset | -5.5 | 19.5 | mV | 15 | |||
| SMBus/PMBus operating frequency | fSMB | 100 | 400 | kHz | Slave mode, SMBC 50% duty cycle | 16 | |
| Bus free time between start and stop | t(BUF) | 1.3 | µs | Fast mode, 400 kHz | 16 | ||
| Clock/data fall time | tf | 300 | ns | 16 |
CAD (KiCad official)
- Symbol:
UCD3138ARMHR - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: WQFN-40(6x6) (KiCad packages3D, STEP)
- 3D model files:
ucd3138armhr-etched.step/ucd3138armhr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucd3138armhr.step/ucd3138armhr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (85 pp, sha256
d8c76afb06ae469a, retrieved 2026-10-31, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# UCD3138ARMHR
**Texas Instruments** · Monitors & Reset Circuits · WQFN-40(6x6)
UCD3138ARMHR from Texas Instruments, in a WQFN-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground. |
| 2 | AD13 | input | 12-bit ADC channel 13, connected to comparator E and I-share. |
| 3 | AD06 | input | 12-bit ADC channel 6, connected to comparator F. |
| 4 | AD04 | input | 12-bit ADC channel 4, connected to comparator D. |
| 5 | AD03 | input | 12-bit ADC channel 3, connected to comparators B and C. |
| 6 | DGND | power_in | Digital ground. |
| 7 | RESET | input | Device reset input, active low. |
| 8 | ADC_EXT_TRIG | bidirectional | ADC conversion external trigger input; alternate functions TCAP, SYNC, PWM0; configurable as GPIO. |
| 9 | PMBUS_CLK | bidirectional | PMBus clock (open drain); alternate function SCI_TX0; configurable as GPIO. |
| 10 | PMBUS_DATA | bidirectional | PMBus data (open drain); alternate function SCI_RX0; configurable as GPIO. |
| 11 | DPWM0A | output | DPWM 0A output; configurable as GPIO. |
| 12 | DPWM0B | output | DPWM 0B output; configurable as GPIO. |
| 13 | DPWM1A | output | DPWM 1A output; configurable as GPIO. |
| 14 | DPWM1B | output | DPWM 1B output; configurable as GPIO. |
| 15 | DPWM2A | output | DPWM 2A output; configurable as GPIO. |
| 16 | DPWM2B | output | DPWM 2B output; configurable as GPIO. |
| 17 | DPWM3A | output | DPWM 3A output; configurable as GPIO. |
| 18 | DPWM3B | output | DPWM 3B output; configurable as GPIO. |
| 19 | PMBUS_ALERT | bidirectional | PMBus alert (open drain); configurable as GPIO. |
| 20 | PMBUS_CTRL | bidirectional | PMBus control (open drain); configurable as GPIO. |
| 21 | TCK | bidirectional | JTAG TCK; alternate functions TCAP, SYNC, PWM0, DTC0; configurable as GPIO. |
| 22 | TDO | bidirectional | JTAG TDO; alternate functions SCI_TX0, PMBUS_ALERT, FAULT0, DTC1; configurable as GPIO. |
| 23 | TDI | bidirectional | JTAG TDI; alternate functions SCI_RX0, PMBUS_CTRL, FAULT1, DTC0; configurable as GPIO. |
| 24 | TMS | bidirectional | JTAG TMS; configurable as GPIO. |
| 25 | FAULT2 | input | External fault input 2; configurable as GPIO. |
| 26 | DGND | power_in | Digital ground. |
| 27 | V33D | power_in | Digital 3.3 V core supply (3 V to 3.6 V recommended). |
| 28 | BP18 | passive | 1.8 V bypass pin (1.6 V to 2 V recommended operating range). |
| 29 | AGND | power_in | Substrate analog ground. |
| 30 | AGND | power_in | Analog ground. |
| 31 | EAP0 | input | Channel 0 differential analog voltage, positive input. |
| 32 | EAN0 | input | Channel 0 differential analog voltage, negative input. |
| 33 | EAP1 | input | Channel 1 differential analog voltage, positive input. |
| 34 | EAN1 | input | Channel 1 differential analog voltage, negative input. |
| 35 | EAP2 | input | Channel 2 differential analog voltage, positive input (recommended for peak current mode control). |
| 36 | AGND | power_in | Analog ground. |
| 37 | V33A | power_in | Analog 3.3 V supply (3 V to 3.6 V recommended). |
| 38 | AD00 | input | 12-bit ADC channel 0, connected to current source. |
| 39 | AD01 | input | 12-bit ADC channel 1, connected to current source. |
| 40 | AD02 | input | 12-bit ADC channel 2, connected to comparator A and I-share. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-40(6x6) |
| Category | Power Supply Chip |
| Pins | 41 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V33D to DGND | V33D | -0.3 | | 3.8 | V | | 12 |
| V33DIO to DGND | V33DIO | -0.3 | | 3.8 | V | | 12 |
| V33A to AGND | V33A | -0.3 | | 3.8 | V | | 12 |
| BP18 to DGND | BP18 | -0.3 | | 2.5 | V | | 12 |
| Ground difference /DGND, AGND/ | | | | 0.3 | V | | 12 |
| Voltage applied to all pins, excluding AGND | | -0.3 | | 3.8 | V | Referenced to DGND | 12 |
| Junction temperature | TJ | -40 | | 150 | °C | | 12 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 12 |
| Digital power | V33D | 3 | 3.3 | 3.6 | V | | 12 |
| Digital I/O power | V33DIO | 3 | 3.3 | 3.6 | V | | 12 |
| Analog power | V33A | 3 | 3.3 | 3.6 | V | | 12 |
| Junction temperature | TJ | -40 | | 125 | °C | | 12 |
| 1.8-V digital power | BP18 | 1.6 | 1.8 | 2 | V | | 12 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | ANSI/ESDA/JEDEC JS-001 | 12 |
| ESD CDM | V(ESD) | -500 | | 500 | V | JESD22-C101 | 12 |
| Junction-to-ambient thermal resistance (40-pin QFN RMH) | RθJA | | 31 | | °C/W | | 15 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 16.5 | | °C/W | | 15 |
| Junction-to-board thermal resistance | RθJB | | 6.3 | | °C/W | | 15 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 1.1 | | °C/W | | 15 |
| Supply current V33A | I33A | | 6.3 | | mA | Measured on V33A. Device powered up but all ADC12 and EADC sampling disabled | 13 |
| Supply current V33DIO | I33DIO | | 0.35 | | mA | All GPIO and communication pins open | 13 |
| Supply current V33D ROM execution | I33D | | 60 | | mA | ROM program execution | 13 |
| Supply current V33D flash programming | I33D | | 70 | | mA | Flash programming in ROM mode | 13 |
| Supply current all DPWMs at 2 MHz | I33 | | 105 | | mA | ROM mode, all DPWMs enabled and switching at 2 MHz, unloaded | 13 |
| EAP, AGND input range | | -0.15 | | 1.998 | V | | 13 |
| EAP, EAN input range | | -0.256 | | 1.848 | V | | 13 |
| EADC digital resolution AFE=3 | | 0.8 | 1 | 1.2 | mV | AFE = 3 | 13 |
| EADC digital resolution AFE=2 | | 1.7 | 2 | 2.3 | mV | AFE = 2 | 13 |
| EADC digital resolution AFE=1 | | 3.55 | 4 | 4.45 | mV | AFE = 1 | 13 |
| EADC digital resolution AFE=0 | | 6.9 | 8 | 9.1 | mV | AFE = 0 | 13 |
| Input impedance | REA | 0.5 | | | MΩ | AGND reference | 13 |
| Input offset current | IOFFSET | -5 | | 5 | μA | | 13 |
| EADC offset AFE=0 | | -2 | | 2 | LSB | Input voltage = 0 V at AFE = 0 | 13 |
| EADC offset AFE=1 | | -2.5 | | 2.5 | LSB | Input voltage = 0 V at AFE = 1 | 13 |
| EADC offset AFE=3 | | -4 | | 4 | LSB | Input voltage = 0 V at AFE = 3 | 13 |
| DAC INL | INL | -3 | | 3 | LSB | | 13 |
| DAC DNL | DNL | -2.1 | | 1.6 | LSB | Does not include MSB transition | 13 |
| DAC reference voltage | | 1.58 | | 1.61 | V | | 13 |
| PMBus address pin bias current | IBIAS | 9.5 | | 10.5 | μA | | 13 |
| Internal ADC reference voltage | | 2.475 | 2.5 | 2.525 | V | -40°C to 125°C | 13 |
| ADC12 INL end point | INL | -3.9 | 2 | 4.5 | LSB | | 14 |
| ADC12 INL best fit | INL | -2.3 | 1.5 | 2.6 | LSB | ADC_SAMPLINGSEL = 0 to 6 for all ADC12 data | 14 |
| ADC Zero Scale Error | | -7 | | 7 | mV | | 14 |
| ADC Full Scale Error | | -35 | | 35 | mV | | 14 |
| Watchdog time out range | TWD | 14.6 | 17 | 20.5 | ms | Total time is TWD × (WDCTRL.PERIOD + 1) | 14 |
| Internal oscillator frequency | f(PCLK) | 240 | 250 | 260 | MHz | | 14 |
| Current share current source | ISHARE | 238 | | 259 | μA | See Figure 6-21 | 14 |
| Current share resistor | RSHARE | 9.75 | | 10.3 | kΩ | See Figure 6-21 | 14 |
| High-level input voltage | VIH | 2.1 | | | V | V33DIO = 3 V | 14 |
| Low-level input voltage | VIL | | | 1.1 | V | V33DIO = 3 V | 14 |
| Voltage good high | VGH | | 2.7 | | V | | 15 |
| Voltage good low | VGL | | 2.5 | | V | | 15 |
| Brownout threshold | | | 2.9 | | V | Internal signal warning of brownout conditions | 15 |
| Temperature sensor accuracy | | -10 | 5 | 10 | ºC | -40°C to 125°C | 15 |
| Comparator reference voltage | | 2.478 | 2.5 | 2.513 | V | | 15 |
| Comparator offset | | -5.5 | | 19.5 | mV | | 15 |
| SMBus/PMBus operating frequency | fSMB | 100 | | 400 | kHz | Slave mode, SMBC 50% duty cycle | 16 |
| Bus free time between start and stop | t(BUF) | 1.3 | | | µs | Fast mode, 400 kHz | 16 |
| Clock/data fall time | tf | | | 300 | ns | | 16 |
## CAD (KiCad official)
- Symbol: `UCD3138ARMHR`
- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`
- 3D model: WQFN-40(6x6) (KiCad packages3D, STEP)
- 3D model files: `ucd3138armhr-etched.step` / `ucd3138armhr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucd3138armhr.step` / `ucd3138armhr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucd3138a) (85 pp, sha256 `d8c76afb06ae469a`, retrieved 2026-10-31, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ucd3138armhr-datasheet.pdf)