Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UCC57108WQDRQ1

Texas Instruments · IC · SOIC-8

UCC57108WQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Non-inverting PWM input, withstands DC voltages from -5V to 30V.
2 NC unconnected Not connected internally on the UCC5710xW-Q1 variant.
3 FLT output Active-low fault reporting output, with maximum sink current of 20 mA and external pull-up range of -0.3V to VDD+0.3V.
4 DESAT input Input for detecting the desaturation fault, rated -0.3V to VDD+0.3V.
5 VDD power_in Driver bias supply, 8.5V to 26V recommended (8V UVLO option) or 14.5V to 26V (12.5V UVLO option), 30V absolute maximum.
6 OUT output Output of the driver with typical 3A sink and 3A source peak currents.
7 EN input Enable or disable control pin, withstands DC voltages from -5V to 30V (W version).
8 GND power_in Driver ground, reference for all voltages in the ratings.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD-GND Positive power supply VDD-GND -0.3 30 V 4
VDD-VEE Differential power supply VDD-VEE -0.3 30 V 4
VEE-GND Negative power supply VEE-GND -18 0.3 V 4
IN signal DC voltage VIN -5 30 V 4
EN signal DC voltage (W version) VEN -5 30 V 4
FLT current sink IFLT 20 mA 4
Junction temperature TJ -40 150 ℃ 4
Storage temperature Tstg -65 150 ℃ 4
ESD HBM V(ESD) -2000 2000 V Human body model, per AEC Q100-002 4
ESD CDM V(ESD) -1000 1000 V Charged device model, per AEC Q100-011 4
VDD-GND Positive power supply (8V UVLO option) VDD-GND 8.5 26 V 8V UVLO option 4
VDD-VEE Differential power supply VDD-VEE 26 V 5
VEE-GND Negative power supply VEE-GND -15 0 V 5
IN signal DC voltage VIN -2 26 V 5
EN signal DC voltage (W version) VEN -2 26 V 5
Junction temperature TJ -40 150 ℃ 5
Junction-to-ambient thermal resistance RθJA 132.7 °C/W D package, 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 74.9 °C/W D package, 8 pins 4
Junction-to-board thermal resistance RθJB 76.3 °C/W D package, 8 pins 4
VDD static supply current IVDD 1.1 1.5 mA VIN = 3.3 V, EN = 5V 5
VDD static supply current IVDD 0.8 1.2 mA VIN = 0 V, EN = 5V 5
VDD disable current IDIS 0.8 1.1 mA VIN = 3.3 V, EN = 0 V 5
VDD UVLO Rising Threshold VVDD_ON 7.6 8 8.4 V 8-V UVLO Option 5
VDD UVLO Falling Threshold VVDD_OFF 6.65 7 7.35 V 8-V UVLO Option 5
VDD UVLO Threshold Hysteresis VVDD_HYS 1 V 8-V UVLO Option 5
Input High Threshold Voltage VINH 1.8 2.2 2.6 V 5
Input Low Threshold Voltage VINL 0.8 1.2 1.6 V 5
Enable High Threshold Voltage VENH 1.8 2.2 2.6 V 5
Enable Low Threshold Voltage VENL 0.8 1.2 1.6 V 5
FLT threshold voltage VFLTth 0.43 1 V IFLT-sink = 15mA 5
Blanking capacitor charge current ICHG 200 250 316 µA VDESAT = 3.25V 5
DESAT Detection Threshold VDESATTH 6 6.5 7 V 6
DESAT propagation delay to 90% of OUT tDES2OUT 140 250 ns VDESAT>VDESATTH 6
DESAT propagation delay to FLT low tDES2FLT 135 250 ns VDESATTH to 90% of FLT 6
Output Rise Time tRA, tRB 8 18 ns CL=1.8nF, 10% to 90%, Vin = 0 to 3.3V 6
Output Fall Time tFA, tFB 14 32 ns CL=1.8nF, 90% to 10%, Vin = 0 to 3.3V 6
Propagation Delay, Input falling to output falling tD2 28 50 ns CL=1.8nF, from 1V falling on Vin to 90% of output fall, Vin=0 - 3.3V, Fsw=500kHz, 50% duty cycle 6
Propagation Delay, Input rising to output rising tD1 26 50 ns CL=1.8nF, from 2V rising on Vin to 10% of output rise, Vin=0 - 3.3V, Fsw=500kHz, 50% duty cycle 6
EN Response Delay (W Version) tPD_EN 26 40 ns CL=1.8nF, from 2V rising on EN to 10% of output rise, EN=0 - 3.3V, Fsw=500kHz, 50% duty cycle 6
DIS Response Delay (W Version) tPD_DIS 27 45 ns CL=1.8nF, from 1V falling on EN to 90% of output fall, EN=0 - 3.3V, Fsw=500kHz, 50% duty cycle 6
Minimum Input Pulse Width That Passes to Output tPWmin 9 15 ns CL=1.8nF, Vin=0 - 3.3V, Fsw=500kHz, Vo >2V 6
Pulse Width Distortion tPWD -10 10 ns Input Pulse Width = 100ns, 500kHz, tD2, tD1, CL=1.8nF 6
Input-threshold Hysteresis VIN_HYS 1 V 5
Enable Threshold Hysteresis VEN_HYS 1 V 5

CAD (KiCad official)

  • Symbol: UCC57108WQDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc57108wqdrq1-etched.step / ucc57108wqdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc57108wqdrq1.step / ucc57108wqdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 cf46ddf0ec0a24e8, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF