component

UCC5350MCDR

Public Made by Adom

by adom

Texas Instruments Isolators - Gate Drivers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmicucc5350mcdr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ucc5350mcdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers ucc5350mcdr: viewers · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 10d ago
README.md ucc5350mcdr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 13d ago
ucc5350mcdr-etched.fit.json ucc5350mcdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
ucc5350mcdr-etched.glb ucc5350mcdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
ucc5350mcdr-etched.step ucc5350mcdr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
ucc5350mcdr.glb Publish 0.1.0 · Ray 1mo ago
ucc5350mcdr.kicad_mod Publish 0.1.0 · Ray 1mo ago
ucc5350mcdr.kicad_sym Publish 0.1.0 · Ray 1mo ago
ucc5350mcdr.lbr Publish 0.1.0 · Ray 1mo ago
ucc5350mcdr.step Publish 0.1.0 · Ray 1mo ago

UCC5350MCDR

Texas Instruments · Isolators - Gate Drivers · SOIC-8

UCC5350MCDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Input-side supply voltage (3 V to 15 V). Connect a locally decoupled capacitor to GND1. Use a low-ESR/ESL capacitor located as close to the device as possible.
2 IN+ input Noninverting gate-drive voltage-control input with CMOS input threshold. Pulled low internally if left open. Together with IN- defines the output logic state.
3 IN- input Inverting gate-drive voltage-control input with CMOS input threshold. Pulled high internally if left open. Together with IN+ defines the output logic state.
4 GND1 power_in Input-side (primary) ground reference. All input-side signals (VCC1, IN+, IN-) are referenced to this ground.
5 VCC2 power_in Positive output-side (secondary) supply rail (13.2 V to 33 V nominal for UCC5350M). Connect a locally decoupled low-ESR/ESL capacitor to VEE2 close to the device.
6 OUT output Gate-drive output for the UCC53x0M variant. Provides 5-A peak source and 5-A peak sink current to drive the gate of an external power MOSFET/IGBT/SiC/GaN device.
7 CLAMP input Active Miller-clamp input found on the UCC53x0M variant. Used to prevent false turn-on of the power switch caused by Miller current during high dV/dt events.
8 VEE2 power_in Negative output-side supply rail; also the output-side ground reference for S and M versions. Connect a locally decoupled low-ESR/ESL capacitor to VCC2 close to the device.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • UCC5350MCDR
  • UCC5350MCDWV

CAD (KiCad official)

  • Symbol: UCC5350MCDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc5350mcdr-etched.step / ucc5350mcdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc5350mcdr.step / ucc5350mcdr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ucc5350mcdr.step 122 KB You want the bare part, or you mark your own boards.
ucc5350mcdr-etched.step 2.6 MB You want the part with UCC5350MCDR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 616 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (60 pp, sha256 798d0abc35823333, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF