component
UCC3895DWTR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+57@@ -0,0 +1,57 @@+# UCC3895DWTR++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-20-300mil++UCC3895DWTR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | EAN | input | Inverting input to the error amplifier; keep voltage below 3.6 V for proper operation. |+| 2 | EAOUT | output | Error amplifier output; internally connected to non-inverting input of PWM comparator and no-load comparator; internally clamped to soft-start voltage. |+| 3 | RAMP | input | Inverting input of the PWM comparator; receives CT waveform in voltage/average current-mode control or current signal with slope compensation in peak current-mode control. |+| 4 | REF | power_out | 5-V ±1.2% precision voltage reference output supplying up to 5 mA; bypass with 0.1-μF low-ESR low-ESL capacitor to GND; do not use more than 4.7 μF total capacitance. |+| 5 | GND | power_in | Analog ground for all internal circuits except output stages. |+| 6 | SYNC | bidirectional | Bidirectional oscillator synchronization pin; functions as clock output when used as output or overrides internal oscillator when used as input with threshold 2.05-2.4 V; can be pulled to GND with 3.9 kΩ minimum. |+| 7 | CT | input | Oscillator timing capacitor; oscillator charges CT via programmed current generating sawtooth waveform with peak 2.35 V; supports 100-880 pF range. |+| 8 | RT | input | Oscillator timing resistor for programming switching frequency; valid range 40-120 kΩ with voltage maintained at 2.9-3.1 V nominal. |+| 9 | DELAB | input | Delay-programming pin for dead time between OUTA and OUTB complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25×10⁻¹² × R_DEL / V_DEL). |+| 10 | DELCD | input | Delay-programming pin for dead time between OUTC and OUTD complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25×10⁻¹² × R_DEL / V_DEL). |+| 11 | ADS | input | Adaptive delay-set pin; sets ratio between maximum and minimum programmed output delay dead time; must be 0-2.5 V and ≤ CS voltage for proper operation. |+| 12 | CS | input | Current sense input for cycle-by-cycle current limiting and overcurrent protection; peak current threshold 1.9-2.1 V, overcurrent threshold 2.4-2.6 V; delay to output 75-110 ns. |+| 13 | OUTD | output | 100-mA complementary MOS driver output; phase-shifted relative to OUTB; optimized to drive MOSFET gate driver circuits or transformers; high-level 250-400 mV, low-level 150-250 mV at 10 mA. |+| 14 | OUTC | output | 100-mA complementary MOS driver output; phase-shifted relative to OUTA; optimized to drive MOSFET gate driver circuits or transformers; high-level 250-400 mV, low-level 150-250 mV at 10 mA. |+| 15 | VDD | power_in | Power supply input pin; operating range 10-16.5 V; bypass with minimum 1-μF low-ESR low-ESL capacitor to PGND; additional 10-μF capacitor between VDD and PGND recommended. |+| 16 | PGND | power_in | Output stage ground providing ground reference for high-current output drivers; must be electrically tied to GND with low-impedance connection. |+| 17 | OUTB | output | 100-mA complementary MOS driver output; fully complementary to OUTA operating at ≈50% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA. |+| 18 | OUTA | output | 100-mA complementary MOS driver output; drives one half-bridge circuit in external power stage; operating at ≈50% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA. |+| 19 | SS/DISB | input | Soft-start and disable pin combining two independent functions; sources current ~35 μA during soft-start mode and sinks ~350 μA during soft-stop (overcurrent) mode; threshold 0.44-0.56 V. |+| 20 | EAP | input | Non-inverting input to the error amplifier; keep voltage below 3.6 V for proper operation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-300mil |+| Category | Power Management (PMIC) |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `UCC3895DWTR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `ucc3895dwtr-etched.step` / `ucc3895dwtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc3895dwtr.step` / `ucc3895dwtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc2895) (61 pp, sha256 `839591a78c6304d9`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc3895dwtr-datasheet.pdf)
page.jsonadded+213@@ -0,0 +1,213 @@+{+ "slug": "ucc3895dwtr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "ucc3895dwtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ucc3895dwtr.kicad_sym",+ "ucc3895dwtr.kicad_mod",+ "ucc3895dwtr.glb",+ "ucc3895dwtr.step",+ "ucc3895dwtr.lbr",+ "docs/hero.png",+ "docs/ucc3895dwtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "UCC3895DWTR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-20-300mil",+ "pin_count": 20,+ "category": "Power Management (PMIC)",+ "subcategory": "AC-DC Controllers And Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ucc2895",+ "parts": {+ "symbol": "ucc3895dwtr.kicad_sym",+ "footprint": "ucc3895dwtr.kicad_mod",+ "model_3d": "ucc3895dwtr-etched.glb",+ "model_3d_plain": "ucc3895dwtr.glb",+ "model_3d_step": "ucc3895dwtr-etched.step",+ "model_3d_step_plain": "ucc3895dwtr.step",+ "lbr": "ucc3895dwtr.lbr"+ },+ "distributor_links": {+ "lcsc": "C24118"+ },+ "pins": [+ {+ "number": "1",+ "name": "EAN",+ "type": "input",+ "description": "Inverting input to the error amplifier; keep voltage below 3.6 V for proper operation."+ },+ {+ "number": "2",+ "name": "EAOUT",+ "type": "output",+ "description": "Error amplifier output; internally connected to non-inverting input of PWM comparator and no-load comparator; internally clamped to soft-start voltage."+ },+ {+ "number": "3",+ "name": "RAMP",+ "type": "input",+ "description": "Inverting input of the PWM comparator; receives CT waveform in voltage/average current-mode control or current signal with slope compensation in peak current-mode control."+ },+ {+ "number": "4",+ "name": "REF",+ "type": "power_out",+ "description": "5-V ±1.2% precision voltage reference output supplying up to 5 mA; bypass with 0.1-μF low-ESR low-ESL capacitor to GND; do not use more than 4.7 μF total capacitance."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground for all internal circuits except output stages."+ },+ {+ "number": "6",+ "name": "SYNC",+ "type": "bidirectional",+ "description": "Bidirectional oscillator synchronization pin; functions as clock output when used as output or overrides internal oscillator when used as input with threshold 2.05-2.4 V; can be pulled to GND with 3.9 kΩ minimum."+ },+ {+ "number": "7",+ "name": "CT",+ "type": "input",+ "description": "Oscillator timing capacitor; oscillator charges CT via programmed current generating sawtooth waveform with peak 2.35 V; supports 100-880 pF range."+ },+ {+ "number": "8",+ "name": "RT",+ "type": "input",+ "description": "Oscillator timing resistor for programming switching frequency; valid range 40-120 kΩ with voltage maintained at 2.9-3.1 V nominal."+ },+ {+ "number": "9",+ "name": "DELAB",+ "type": "input",+ "description": "Delay-programming pin for dead time between OUTA and OUTB complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25×10⁻¹² × R_DEL / V_DEL)."+ },+ {+ "number": "10",+ "name": "DELCD",+ "type": "input",+ "description": "Delay-programming pin for dead time between OUTC and OUTD complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25×10⁻¹² × R_DEL / V_DEL)."+ },+ {+ "number": "11",+ "name": "ADS",+ "type": "input",+ "description": "Adaptive delay-set pin; sets ratio between maximum and minimum programmed output delay dead time; must be 0-2.5 V and ≤ CS voltage for proper operation."+ },+ {+ "number": "12",+ "name": "CS",+ "type": "input",+ "description": "Current sense input for cycle-by-cycle current limiting and overcurrent protection; peak current threshold 1.9-2.1 V, overcurrent threshold 2.4-2.6 V; delay to output 75-110 ns."+ },+ {+ "number": "13",+ "name": "OUTD",+ "type": "output",+ "description": "100-mA complementary MOS driver output; phase-shifted relative to OUTB; optimized to drive MOSFET gate driver circuits or transformers; high-level 250-400 mV, low-level 150-250 mV at 10 mA."+ },+ {+ "number": "14",+ "name": "OUTC",+ "type": "output",+ "description": "100-mA complementary MOS driver output; phase-shifted relative to OUTA; optimized to drive MOSFET gate driver circuits or transformers; high-level 250-400 mV, low-level 150-250 mV at 10 mA."+ },+ {+ "number": "15",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply input pin; operating range 10-16.5 V; bypass with minimum 1-μF low-ESR low-ESL capacitor to PGND; additional 10-μF capacitor between VDD and PGND recommended."+ },+ {+ "number": "16",+ "name": "PGND",+ "type": "power_in",+ "description": "Output stage ground providing ground reference for high-current output drivers; must be electrically tied to GND with low-impedance connection."+ },+ {+ "number": "17",+ "name": "OUTB",+ "type": "output",+ "description": "100-mA complementary MOS driver output; fully complementary to OUTA operating at ≈50% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA."+ },+ {+ "number": "18",+ "name": "OUTA",+ "type": "output",+ "description": "100-mA complementary MOS driver output; drives one half-bridge circuit in external power stage; operating at ≈50% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA."+ },+ {+ "number": "19",+ "name": "SS/DISB",+ "type": "input",+ "description": "Soft-start and disable pin combining two independent functions; sources current ~35 μA during soft-start mode and sinks ~350 μA during soft-stop (overcurrent) mode; threshold 0.44-0.56 V."+ },+ {+ "number": "20",+ "name": "EAP",+ "type": "input",+ "description": "Non-inverting input to the error amplifier; keep voltage below 3.6 V for proper operation."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 61,+ "cost_usd": 0.5075,+ "at": "2026-09-22T21:11:15"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ucc2895",+ "pages": 61,+ "sha256": "839591a78c6304d9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}