← Commit history

Initial commit: component/ucc3813dtr-3

Ray ·977608a3ec ·
2 files changed +186
README.mdadded+45
@@ -0,0 +1,45 @@+# UCC3813DTR-3++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8++UCC3813DTR-3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error amplifier output and PWM comparator input; soft start ramps voltage from 0V to REF-1V over 4ms; feedback loop compensation network connected between COMP and FB pins. |+| 2 | FB | input | Inverting input of error amplifier; error amplifier non-inverting input internally biased to REF/2 (2V nominal for UCC3813-3); minimize lead length and parasitic capacitance for optimal stability. |+| 3 | CS | input | Current sense comparator input (PWM and overcurrent) with 100ns leading edge blanking; gain 1.65V/V typical; maximum input signal 1V when COMP = 5V. |+| 4 | RC | input | Oscillator timing programming pin; external resistor (10kΩ to 200kΩ) and capacitor (100pF to 1000pF) program switching frequency up to 1MHz and maximum duty cycle. |+| 5 | GND | power_in | Signal return ground and power return ground for all device functions. |+| 6 | OUT | output | High-current MOSFET gate driver output; peak current capability ±1A; actively held low during UVLO condition; on-chip Zener clamp limits voltage to VCC. |+| 7 | VCC | power_in | Bias power supply input; typical operating voltage 10V; connect through current-limiting resistor; internal 13.5V Zener clamp limits maximum voltage; requires 0.1µF bypass capacitor to GND. |+| 8 | REF | output | Voltage reference output nominally 4V with ±1.5% tolerance at 25°C 0.2mA load; provides bias to error amplifier and logic functions; requires 0.1µF bypass capacitor to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC3813DTR-3`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `ucc3813dtr-3-etched.step` / `ucc3813dtr-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc3813dtr-3.step` / `ucc3813dtr-3.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc3813-0) (53 pp, sha256 `e691a7fcf4f2163a`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc3813dtr-3-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "ucc3813dtr-3",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc3813dtr-3",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc3813dtr-3.kicad_sym",+    "ucc3813dtr-3.kicad_mod",+    "ucc3813dtr-3.glb",+    "ucc3813dtr-3.step",+    "ucc3813dtr-3.lbr",+    "docs/hero.png",+    "docs/ucc3813dtr-3-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC3813DTR-3",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc3813-0",+    "parts": {+      "symbol": "ucc3813dtr-3.kicad_sym",+      "footprint": "ucc3813dtr-3.kicad_mod",+      "model_3d": "ucc3813dtr-3-etched.glb",+      "model_3d_plain": "ucc3813dtr-3.glb",+      "model_3d_step": "ucc3813dtr-3-etched.step",+      "model_3d_step_plain": "ucc3813dtr-3.step",+      "lbr": "ucc3813dtr-3.lbr"+    },+    "distributor_links": {+      "lcsc": "C544332"+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output and PWM comparator input; soft start ramps voltage from 0V to REF-1V over 4ms; feedback loop compensation network connected between COMP and FB pins."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Inverting input of error amplifier; error amplifier non-inverting input internally biased to REF/2 (2V nominal for UCC3813-3); minimize lead length and parasitic capacitance for optimal stability."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "Current sense comparator input (PWM and overcurrent) with 100ns leading edge blanking; gain 1.65V/V typical; maximum input signal 1V when COMP = 5V."+      },+      {+        "number": "4",+        "name": "RC",+        "type": "input",+        "description": "Oscillator timing programming pin; external resistor (10kΩ to 200kΩ) and capacitor (100pF to 1000pF) program switching frequency up to 1MHz and maximum duty cycle."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Signal return ground and power return ground for all device functions."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "High-current MOSFET gate driver output; peak current capability ±1A; actively held low during UVLO condition; on-chip Zener clamp limits voltage to VCC."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_in",+        "description": "Bias power supply input; typical operating voltage 10V; connect through current-limiting resistor; internal 13.5V Zener clamp limits maximum voltage; requires 0.1µF bypass capacitor to GND."+      },+      {+        "number": "8",+        "name": "REF",+        "type": "output",+        "description": "Voltage reference output nominally 4V with ±1.5% tolerance at 25°C 0.2mA load; provides bias to error amplifier and logic functions; requires 0.1µF bypass capacitor to GND."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 53,+        "cost_usd": 0.5908,+        "at": "2026-09-24T05:17:29"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ucc3813-0",+        "pages": 53,+        "sha256": "e691a7fcf4f2163a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file