main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ucc28c43qdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ucc28c43qdrq1: viewers · Ray
package.json ucc28c43qdrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ucc28c43qdrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/ucc28c43qdrq1 · Ray
ucc28c43qdrq1-etched.fit.json ucc28c43qdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28c43qdrq1-etched.glb ucc28c43qdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28c43qdrq1-etched.step ucc28c43qdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28c43qdrq1.glb Publish 0.1.0 · Ray
ucc28c43qdrq1.kicad_mod Publish 0.1.0 · Ray
ucc28c43qdrq1.kicad_sym Publish 0.1.0 · Ray
ucc28c43qdrq1.lbr Publish 0.1.0 · Ray
ucc28c43qdrq1.step Publish 0.1.0 · Ray

UCC28C43QDRQ1

Texas Instruments · AC-DC Controllers And Regulators · SOIC-8

UCC28C43QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Output of error amplifier for compensation with internal current limiting; command zero duty cycle by externally forcing COMP to GND; operates -0.3 to 6.3 V.
2 FB input Inverting input to error amplifier with noninverting input internally trimmed to 2.5 V ±1%; controls power converter voltage-feedback loop for stability; operates -0.3 to 6.3 V.
3 CS input Primary-side current sense pin and noninverting input to PWM comparator with maximum input signal 0.9-1.1 V; compared to error amplifier output to terminate OUT switch conduction; operates -0.3 to 6.3 V.
4 RT/CT bidirectional Fixed frequency oscillator set point; connect timing resistor to VREF and timing capacitor to GND to set switching frequency; keep timing capacitor lead to GND as short and direct as possible; operates -0.3 to 6.3 V.
5 GND power_in Ground return pin for output driver stage and logic level controller section.
6 OUT output Output of on-chip drive stage for directly driving MOSFET; same frequency as oscillator in UCC28C43-Q1 operating near 100% duty cycle; sources and sinks ±1 A peak with rise time 25 ns and fall time 20 ns; operates -0.3 to 20 V.
7 VDD power_in Analog controller bias input providing power to device with typical operating current 2.3 mA at 50 kHz and startup current 50-100 µA; requires 0.1 µF bypass capacitor connected directly to GND with minimal trace length; absolute maximum 20 V.
8 VREF power_in 5-V reference voltage output (nominal 5 V ±1%) for charging oscillator timing capacitor through timing resistor; provides internal bias currents and thresholds; requires minimum 0.1 µF ceramic bypass capacitor to GND; absolute maximum 7 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: UCC28C43QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc28c43qdrq1-etched.step / ucc28c43qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28c43qdrq1.step / ucc28c43qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 0ab76ce5a6cf1522, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF