← Commit history

Initial commit: component/ucc28c43qdrq1

Ray ·8ed947877f ·
2 files changed +186
README.mdadded+45
@@ -0,0 +1,45 @@+# UCC28C43QDRQ1++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8++UCC28C43QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Output of error amplifier for compensation with internal current limiting; command zero duty cycle by externally forcing COMP to GND; operates -0.3 to 6.3 V. |+| 2 | FB | input | Inverting input to error amplifier with noninverting input internally trimmed to 2.5 V ±1%; controls power converter voltage-feedback loop for stability; operates -0.3 to 6.3 V. |+| 3 | CS | input | Primary-side current sense pin and noninverting input to PWM comparator with maximum input signal 0.9-1.1 V; compared to error amplifier output to terminate OUT switch conduction; operates -0.3 to 6.3 V. |+| 4 | RT/CT | bidirectional | Fixed frequency oscillator set point; connect timing resistor to VREF and timing capacitor to GND to set switching frequency; keep timing capacitor lead to GND as short and direct as possible; operates -0.3 to 6.3 V. |+| 5 | GND | power_in | Ground return pin for output driver stage and logic level controller section. |+| 6 | OUT | output | Output of on-chip drive stage for directly driving MOSFET; same frequency as oscillator in UCC28C43-Q1 operating near 100% duty cycle; sources and sinks ±1 A peak with rise time 25 ns and fall time 20 ns; operates -0.3 to 20 V. |+| 7 | VDD | power_in | Analog controller bias input providing power to device with typical operating current 2.3 mA at 50 kHz and startup current 50-100 µA; requires 0.1 µF bypass capacitor connected directly to GND with minimal trace length; absolute maximum 20 V. |+| 8 | VREF | power_in | 5-V reference voltage output (nominal 5 V ±1%) for charging oscillator timing capacitor through timing resistor; provides internal bias currents and thresholds; requires minimum 0.1 µF ceramic bypass capacitor to GND; absolute maximum 7 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC28C43QDRQ1`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `ucc28c43qdrq1-etched.step` / `ucc28c43qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc28c43qdrq1.step` / `ucc28c43qdrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc28c44-q1) (49 pp, sha256 `0ab76ce5a6cf1522`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc28c43qdrq1-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "ucc28c43qdrq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc28c43qdrq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc28c43qdrq1.kicad_sym",+    "ucc28c43qdrq1.kicad_mod",+    "ucc28c43qdrq1.glb",+    "ucc28c43qdrq1.step",+    "ucc28c43qdrq1.lbr",+    "docs/hero.png",+    "docs/ucc28c43qdrq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC28C43QDRQ1",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc28c44-q1",+    "parts": {+      "symbol": "ucc28c43qdrq1.kicad_sym",+      "footprint": "ucc28c43qdrq1.kicad_mod",+      "model_3d": "ucc28c43qdrq1-etched.glb",+      "model_3d_plain": "ucc28c43qdrq1.glb",+      "model_3d_step": "ucc28c43qdrq1-etched.step",+      "model_3d_step_plain": "ucc28c43qdrq1.step",+      "lbr": "ucc28c43qdrq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C702435"+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "output",+        "description": "Output of error amplifier for compensation with internal current limiting; command zero duty cycle by externally forcing COMP to GND; operates -0.3 to 6.3 V."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Inverting input to error amplifier with noninverting input internally trimmed to 2.5 V ±1%; controls power converter voltage-feedback loop for stability; operates -0.3 to 6.3 V."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "Primary-side current sense pin and noninverting input to PWM comparator with maximum input signal 0.9-1.1 V; compared to error amplifier output to terminate OUT switch conduction; operates -0.3 to 6.3 V."+      },+      {+        "number": "4",+        "name": "RT/CT",+        "type": "bidirectional",+        "description": "Fixed frequency oscillator set point; connect timing resistor to VREF and timing capacitor to GND to set switching frequency; keep timing capacitor lead to GND as short and direct as possible; operates -0.3 to 6.3 V."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground return pin for output driver stage and logic level controller section."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "Output of on-chip drive stage for directly driving MOSFET; same frequency as oscillator in UCC28C43-Q1 operating near 100% duty cycle; sources and sinks ±1 A peak with rise time 25 ns and fall time 20 ns; operates -0.3 to 20 V."+      },+      {+        "number": "7",+        "name": "VDD",+        "type": "power_in",+        "description": "Analog controller bias input providing power to device with typical operating current 2.3 mA at 50 kHz and startup current 50-100 µA; requires 0.1 µF bypass capacitor connected directly to GND with minimal trace length; absolute maximum 20 V."+      },+      {+        "number": "8",+        "name": "VREF",+        "type": "power_in",+        "description": "5-V reference voltage output (nominal 5 V ±1%) for charging oscillator timing capacitor through timing resistor; provides internal bias currents and thresholds; requires minimum 0.1 µF ceramic bypass capacitor to GND; absolute maximum 7 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 49,+        "cost_usd": 0.5225,+        "at": "2026-09-23T04:09:56"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ucc28c44-q1",+        "pages": 49,+        "sha256": "0ab76ce5a6cf1522",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file