← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# UCC28C40DGKR++**Texas Instruments** · DC-DC Converters · VSSOP-8++UCC28C40DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error amplifier output for compensation; internally current-limited to sink 10mA maximum; can command zero duty cycle by forcing to GND. |+| 2 | FB | input | Inverting input to error amplifier for voltage-feedback loop control; internal noninverting reference trimmed to 2.5V ± 1%. |+| 3 | CS | input | Primary-side current sense input to PWM comparator with 3V/V gain; maximum threshold 0.9V to 1.1V (typical 1V); connect to current sensing resistor. |+| 4 | RT/CT | bidirectional | Fixed frequency oscillator set point; connect timing resistor (RRT) to VREF and timing capacitor (CCT) to GND to program switching frequency from 1kHz to 1MHz. |+| 5 | GND | power_in | Ground return for output driver stage and logic level controller section; separate signal and high-current return paths. |+| 6 | OUT | output | On-chip drive stage output for direct MOSFET gate driving; sources and sinks ±1A peak current; actively held low when VDD is below turn-on threshold. |+| 7 | VDD | power_in | Analog controller power supply input with absolute maximum 20V; requires 0.1µF bypass capacitor directly to GND with minimal trace length. |+| 8 | VREF | power_out | 5V reference output (±1% initial accuracy, ±2% over temperature -40°C to 125°C); provides oscillator charging current; requires 0.1µF ceramic bypass to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC28C40DGKR`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `ucc28c40dgkr-etched.step` / `ucc28c40dgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc28c40dgkr.step` / `ucc28c40dgkr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc28c40.pdf) (60 pp, sha256 `9fa55f996731c56b`, retrieved 2026-09-22, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc28c40dgkr-datasheet.pdf)
page.jsonadded+141@@ -0,0 +1,141 @@+{+ "slug": "ucc28c40dgkr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "ucc28c40dgkr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ucc28c40dgkr.kicad_sym",+ "ucc28c40dgkr.kicad_mod",+ "ucc28c40dgkr.glb",+ "ucc28c40dgkr.step",+ "ucc28c40dgkr.lbr",+ "docs/hero.png",+ "docs/ucc28c40dgkr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "UCC28C40DGKR",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28c40.pdf",+ "parts": {+ "symbol": "ucc28c40dgkr.kicad_sym",+ "footprint": "ucc28c40dgkr.kicad_mod",+ "model_3d": "ucc28c40dgkr-etched.glb",+ "model_3d_plain": "ucc28c40dgkr.glb",+ "model_3d_step": "ucc28c40dgkr-etched.step",+ "model_3d_step_plain": "ucc28c40dgkr.step",+ "lbr": "ucc28c40dgkr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2657923"+ },+ "pins": [+ {+ "number": "1",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output for compensation; internally current-limited to sink 10mA maximum; can command zero duty cycle by forcing to GND."+ },+ {+ "number": "2",+ "name": "FB",+ "type": "input",+ "description": "Inverting input to error amplifier for voltage-feedback loop control; internal noninverting reference trimmed to 2.5V ± 1%."+ },+ {+ "number": "3",+ "name": "CS",+ "type": "input",+ "description": "Primary-side current sense input to PWM comparator with 3V/V gain; maximum threshold 0.9V to 1.1V (typical 1V); connect to current sensing resistor."+ },+ {+ "number": "4",+ "name": "RT/CT",+ "type": "bidirectional",+ "description": "Fixed frequency oscillator set point; connect timing resistor (RRT) to VREF and timing capacitor (CCT) to GND to program switching frequency from 1kHz to 1MHz."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return for output driver stage and logic level controller section; separate signal and high-current return paths."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "On-chip drive stage output for direct MOSFET gate driving; sources and sinks ±1A peak current; actively held low when VDD is below turn-on threshold."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Analog controller power supply input with absolute maximum 20V; requires 0.1µF bypass capacitor directly to GND with minimal trace length."+ },+ {+ "number": "8",+ "name": "VREF",+ "type": "power_out",+ "description": "5V reference output (±1% initial accuracy, ±2% over temperature -40°C to 125°C); provides oscillator charging current; requires 0.1µF ceramic bypass to GND."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 60,+ "cost_usd": 0.6029,+ "at": "2026-09-22T21:49:19"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/ucc28c40.pdf",+ "pages": 60,+ "sha256": "9fa55f996731c56b",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}