← Commit history

Initial commit: component/ucc28950pwr

Ray ·db1cef9b5d ·
2 files changed +299
README.mdadded+60
@@ -0,0 +1,60 @@+# UCC28950PWR++**Texas Instruments** · DC-DC Converters · TSSOP-24++UCC28950PWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VREF | power_in | 5V reference voltage output with ±1.5% accuracy and 20mA maximum output current. |+| 2 | EA+ | input | Error amplifier noninverting input with common-mode input range from 0.5V to 3.6V. |+| 3 | EA- | input | Error amplifier inverting input with common-mode input range from 0.5V to 3.6V. |+| 4 | COMP | bidirectional | Error amplifier output and input to PWM comparator with output range 0.25V to 4.25V. |+| 5 | SS/EN | input | Soft-start programming and device enable input with shutdown threshold at 0.55V and pullup threshold at 3.7V typical. |+| 6 | DELAB | input | Dead-time programming input for delay between OUTA and OUTB gate drive outputs through external resistor to GND. |+| 7 | DELCD | input | Dead-time programming input for delay between OUTC and OUTD gate drive outputs through external resistor to GND. |+| 8 | DELEF | input | Delay-time programming input between primary side OUTA/OUTB and secondary side OUTE/OUTF through external resistor to GND. |+| 9 | TMIN | input | Minimum pulse width programming for burst mode operation through external resistor to GND, typical range 100ns to 800ns. |+| 10 | RT | input | Oscillator frequency setting and mode configuration; connect to VREF for leader mode or to GND for follower mode operation. |+| 11 | RSUM | input | Slope compensation programming for peak-current mode or voltage-mode control through external resistor to GND or VREF. |+| 12 | DCM | input | Discontinuous conduction mode threshold setting through resistor divider to enable synchronous rectifier disable at light load. |+| 13 | ADELEF | input | Adaptive delay-time programming between primary and secondary side switches through resistor divider to CS/GND. |+| 14 | ADEL | input | Adaptive dead-time programming for primary switches varying with load current through resistor divider to CS/GND. |+| 15 | CS | input | Current sense input for cycle-by-cycle overcurrent protection with 2.0V ±3% threshold and adaptive delay functions. |+| 16 | SYNC | bidirectional | Synchronization output from leader controller providing 0.5 duty-cycle pulses or input from leader for follower phase synchronization. |+| 17 | OUTF | output | Secondary synchronous rectifier gate drive output with 0.2A sink and source capability and amplitude equal to VDD. |+| 18 | OUTE | output | Secondary synchronous rectifier gate drive output with 0.2A sink and source capability and amplitude equal to VDD. |+| 19 | OUTD | output | Primary full-bridge gate drive output with 0.2A sink and source capability for complementary switch QD. |+| 20 | OUTC | output | Primary full-bridge gate drive output with 0.2A sink and source capability for complementary switch QC. |+| 21 | OUTB | output | Primary full-bridge gate drive output with 0.2A sink and source capability for low-side switch QB. |+| 22 | OUTA | output | Primary full-bridge gate drive output with 0.2A sink and source capability for high-side switch QA. |+| 23 | VDD | power_in | Bias supply input in range 8V to 17V requiring 1μF ceramic bypass capacitor with low ESR and ESL. |+| 24 | GND | power_in | Ground reference node for all signals and power return with recommended separate quiet analog plane connection. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | Power Management (PMIC) |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `UCC28950PWR`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `ucc28950pwr-etched.step` / `ucc28950pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc28950pwr.step` / `ucc28950pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc28950.pdf) (80 pp, sha256 `a765d09f25ef27f8`, retrieved 2026-09-24, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc28950pwr-datasheet.pdf)
page.jsonadded+239
@@ -0,0 +1,239 @@+{+  "slug": "ucc28950pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc28950pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc28950pwr.kicad_sym",+    "ucc28950pwr.kicad_mod",+    "ucc28950pwr.glb",+    "ucc28950pwr.step",+    "ucc28950pwr.lbr",+    "docs/hero.png",+    "docs/ucc28950pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC28950PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28950.pdf",+    "parts": {+      "symbol": "ucc28950pwr.kicad_sym",+      "footprint": "ucc28950pwr.kicad_mod",+      "model_3d": "ucc28950pwr-etched.glb",+      "model_3d_plain": "ucc28950pwr.glb",+      "model_3d_step": "ucc28950pwr-etched.step",+      "model_3d_step_plain": "ucc28950pwr.step",+      "lbr": "ucc28950pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C91312"+    },+    "pins": [+      {+        "number": "1",+        "name": "VREF",+        "type": "power_in",+        "description": "5V reference voltage output with ±1.5% accuracy and 20mA maximum output current."+      },+      {+        "number": "2",+        "name": "EA+",+        "type": "input",+        "description": "Error amplifier noninverting input with common-mode input range from 0.5V to 3.6V."+      },+      {+        "number": "3",+        "name": "EA–",+        "type": "input",+        "description": "Error amplifier inverting input with common-mode input range from 0.5V to 3.6V."+      },+      {+        "number": "4",+        "name": "COMP",+        "type": "bidirectional",+        "description": "Error amplifier output and input to PWM comparator with output range 0.25V to 4.25V."+      },+      {+        "number": "5",+        "name": "SS/EN",+        "type": "input",+        "description": "Soft-start programming and device enable input with shutdown threshold at 0.55V and pullup threshold at 3.7V typical."+      },+      {+        "number": "6",+        "name": "DELAB",+        "type": "input",+        "description": "Dead-time programming input for delay between OUTA and OUTB gate drive outputs through external resistor to GND."+      },+      {+        "number": "7",+        "name": "DELCD",+        "type": "input",+        "description": "Dead-time programming input for delay between OUTC and OUTD gate drive outputs through external resistor to GND."+      },+      {+        "number": "8",+        "name": "DELEF",+        "type": "input",+        "description": "Delay-time programming input between primary side OUTA/OUTB and secondary side OUTE/OUTF through external resistor to GND."+      },+      {+        "number": "9",+        "name": "TMIN",+        "type": "input",+        "description": "Minimum pulse width programming for burst mode operation through external resistor to GND, typical range 100ns to 800ns."+      },+      {+        "number": "10",+        "name": "RT",+        "type": "input",+        "description": "Oscillator frequency setting and mode configuration; connect to VREF for leader mode or to GND for follower mode operation."+      },+      {+        "number": "11",+        "name": "RSUM",+        "type": "input",+        "description": "Slope compensation programming for peak-current mode or voltage-mode control through external resistor to GND or VREF."+      },+      {+        "number": "12",+        "name": "DCM",+        "type": "input",+        "description": "Discontinuous conduction mode threshold setting through resistor divider to enable synchronous rectifier disable at light load."+      },+      {+        "number": "13",+        "name": "ADELEF",+        "type": "input",+        "description": "Adaptive delay-time programming between primary and secondary side switches through resistor divider to CS/GND."+      },+      {+        "number": "14",+        "name": "ADEL",+        "type": "input",+        "description": "Adaptive dead-time programming for primary switches varying with load current through resistor divider to CS/GND."+      },+      {+        "number": "15",+        "name": "CS",+        "type": "input",+        "description": "Current sense input for cycle-by-cycle overcurrent protection with 2.0V ±3% threshold and adaptive delay functions."+      },+      {+        "number": "16",+        "name": "SYNC",+        "type": "bidirectional",+        "description": "Synchronization output from leader controller providing 0.5 duty-cycle pulses or input from leader for follower phase synchronization."+      },+      {+        "number": "17",+        "name": "OUTF",+        "type": "output",+        "description": "Secondary synchronous rectifier gate drive output with 0.2A sink and source capability and amplitude equal to VDD."+      },+      {+        "number": "18",+        "name": "OUTE",+        "type": "output",+        "description": "Secondary synchronous rectifier gate drive output with 0.2A sink and source capability and amplitude equal to VDD."+      },+      {+        "number": "19",+        "name": "OUTD",+        "type": "output",+        "description": "Primary full-bridge gate drive output with 0.2A sink and source capability for complementary switch QD."+      },+      {+        "number": "20",+        "name": "OUTC",+        "type": "output",+        "description": "Primary full-bridge gate drive output with 0.2A sink and source capability for complementary switch QC."+      },+      {+        "number": "21",+        "name": "OUTB",+        "type": "output",+        "description": "Primary full-bridge gate drive output with 0.2A sink and source capability for low-side switch QB."+      },+      {+        "number": "22",+        "name": "OUTA",+        "type": "output",+        "description": "Primary full-bridge gate drive output with 0.2A sink and source capability for high-side switch QA."+      },+      {+        "number": "23",+        "name": "VDD",+        "type": "power_in",+        "description": "Bias supply input in range 8V to 17V requiring 1μF ceramic bypass capacitor with low ESR and ESL."+      },+      {+        "number": "24",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference node for all signals and power return with recommended separate quiet analog plane connection."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Output pins OUTA through OUTF have dual capability as both source and sink with 0.2A peak current ea; COMP and SYNC pins are bidirectional; COMP operates as error amplifier output when used in feedback ; External resistor and capacitor networks are required on programming pins (DELAB, DELCD, DELEF, TMIN"+        ],+        "pages_sent": 80,+        "cost_usd": 0.6323,+        "at": "2026-09-24T09:27:36"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/ucc28950.pdf",+        "pages": 80,+        "sha256": "a765d09f25ef27f8",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file