main
Ray ucc2891dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) ecbfb1d
{
  "slug": "ucc2891dr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc2891dr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc2891dr.kicad_sym",
    "ucc2891dr.kicad_mod",
    "ucc2891dr.glb",
    "ucc2891dr.step",
    "ucc2891dr.lbr",
    "docs/hero.png",
    "docs/ucc2891dr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "UCC2891DR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc2891.pdf",
    "parts": {
      "symbol": "ucc2891dr.kicad_sym",
      "footprint": "ucc2891dr.kicad_mod",
      "model_3d": "ucc2891dr-etched.glb",
      "model_3d_plain": "ucc2891dr.glb",
      "model_3d_step": "ucc2891dr-etched.step",
      "model_3d_step_plain": "ucc2891dr.step",
      "lbr": "ucc2891dr.lbr"
    },
    "distributor_links": {
      "lcsc": "C1848490",
      "digikey": "296-UCC2891DRTR-ND",
      "mouser": "595-UCC2891DR"
    },
    "distributor_check": {
      "checked_at": "2026-09-26T22:48:53Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-UCC2891DRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-UCC2891DR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RTDEL",
        "type": "input",
        "description": "A resistor from this pin to GND programs the turn-on delay for both gate drive outputs to accommodate the resonant transitions of the active clamp power converter."
      },
      {
        "number": "2",
        "name": "RTON",
        "type": "input",
        "description": "A resistor to GND programs an internal current source that charges the internal timing capacitor and is used to set the operating frequency and maximum duty cycle."
      },
      {
        "number": "3",
        "name": "RTOFF",
        "type": "input",
        "description": "A resistor to GND programs an internal current source that discharges the internal timing capacitor and is used to set the switching period and maximum duty cycle."
      },
      {
        "number": "4",
        "name": "VREF",
        "type": "power_out",
        "description": "Supplies the controller's internal 5-V bias rail as a reference voltage with current-limited output of approximately 5 mA for external circuits."
      },
      {
        "number": "5",
        "name": "SYNC",
        "type": "input",
        "description": "Unidirectional synchronization input for the internal oscillator with minimum pulse width of approximately 50 ns and synchronizing frequency higher than the free-running oscillator frequency."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Provides the reference potential for all small-signal control and programming circuitry inside the device."
      },
      {
        "number": "7",
        "name": "CS",
        "type": "input",
        "description": "Direct input to the PWM and current-limit comparators for peak current sensing; threshold is 0.75 V for UCC2891."
      },
      {
        "number": "8",
        "name": "RSLOPE",
        "type": "input",
        "description": "A resistor connected from this pin to GND sets the amplitude of the slope compensation current for current-mode control circuitry."
      },
      {
        "number": "9",
        "name": "FB",
        "type": "input",
        "description": "Input for the control voltage of the pulse width modulator generated by an external error amplifier; useful voltage range is approximately 1.25 V to 4.5 V."
      },
      {
        "number": "10",
        "name": "SS/SD",
        "type": "input",
        "description": "A capacitor from this pin to GND is charged by an internal current source to program the soft-start interval and discharged during fault conditions."
      },
      {
        "number": "11",
        "name": "PGND",
        "type": "power_in",
        "description": "Dedicated connection for all high-current circuits including the two high-current gate drivers; requires low-impedance external connection to GND pin."
      },
      {
        "number": "12",
        "name": "AUX",
        "type": "output",
        "description": "High-current gate drive output for the auxiliary clamp MOSFET with 2-A source and 2-A sink current capability; active low for P-channel devices."
      },
      {
        "number": "13",
        "name": "OUT",
        "type": "output",
        "description": "High-current output driving the main N-channel PWM switching MOSFET with 2-A source and 2-A sink current capability."
      },
      {
        "number": "14",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply for the device biasing the internal gate drivers and 5-V regulator; supply range is 8.5 to 16.0 V with recommended 1-µF bypass capacitor to PGND."
      },
      {
        "number": "15",
        "name": "LINEUV",
        "type": "input",
        "description": "Monitors incoming power source to provide accurate undervoltage lockout with programmable hysteresis; threshold voltage is 1.27 V."
      },
      {
        "number": "16",
        "name": "VIN",
        "type": "power_in",
        "description": "Connected to the input power rail directly for UCC2891; a high-voltage P-channel JFET startup device provides startup current until bootstrap bias is available, maximum rating 120 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 41,
        "cost_usd": 0.3968,
        "at": "2026-09-26T22:48:34"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc2891.pdf",
        "pages": 41,
        "sha256": "0b123b68deef52c5",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc2891dr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc2891dr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "08a77561274fe3d4b4a1f575b8a4b46b823e23b4b6ae9ffdf424d9639a6b2e29",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}