component
UCC28700QDBVRQ1
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
UCC28700QDBVRQ1
Texas Instruments · AC-DC Controllers And Regulators · SOT-23-6
UCC28700QDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CBC | input | Cable Compensation pin is programmed with a resistor to GND to set the cable voltage-drop compensation, with the CBC pin spanning 0 V to 3 V across 0 to IOCC output current. |
| 2 | VDD | power_in | VDD is the bias supply input to the controller and requires a carefully placed bypass capacitor to GND, with a recommended bias supply operating voltage of 9 V to 35 V. |
| 3 | DRV | output | Drive output used to drive the gate of an external high-voltage MOSFET switching transistor, with gate-drive voltage limited to 14 V. |
| 4 | CS | input | Current Sense input connects to a ground-referenced current-sense resistor in series with the power switch to monitor and control peak primary current, with a normal operating range of 0.75 V to 0.25 V and a 1.5 V fault threshold. |
| 5 | GND | power_in | Ground pin is both the reference for the controller and the low-side return for the drive output, and all AC decoupling capacitors should return as close as possible to this pin. |
| 6 | VS | power_in | Voltage Sense input receives feedback from a voltage divider between an auxiliary winding and GND for voltage and timing feedback, with a peak VS pin current limit of −1.2 mA in the absolute maximum ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
UCC28700QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ucc28700qdbvrq1-etched.step/ucc28700qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc28700qdbvrq1.step/ucc28700qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
6f5a94969d3d4d3a, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# UCC28700QDBVRQ1
**Texas Instruments** · AC-DC Controllers And Regulators · SOT-23-6
UCC28700QDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CBC | input | Cable Compensation pin is programmed with a resistor to GND to set the cable voltage-drop compensation, with the CBC pin spanning 0 V to 3 V across 0 to IOCC output current. |
| 2 | VDD | power_in | VDD is the bias supply input to the controller and requires a carefully placed bypass capacitor to GND, with a recommended bias supply operating voltage of 9 V to 35 V. |
| 3 | DRV | output | Drive output used to drive the gate of an external high-voltage MOSFET switching transistor, with gate-drive voltage limited to 14 V. |
| 4 | CS | input | Current Sense input connects to a ground-referenced current-sense resistor in series with the power switch to monitor and control peak primary current, with a normal operating range of 0.75 V to 0.25 V and a 1.5 V fault threshold. |
| 5 | GND | power_in | Ground pin is both the reference for the controller and the low-side return for the drive output, and all AC decoupling capacitors should return as close as possible to this pin. |
| 6 | VS | power_in | Voltage Sense input receives feedback from a voltage divider between an auxiliary winding and GND for voltage and timing feedback, with a peak VS pin current limit of −1.2 mA in the absolute maximum ratings. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## CAD (KiCad official)
- Symbol: `UCC28700QDBVRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ucc28700qdbvrq1-etched.step` / `ucc28700qdbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc28700qdbvrq1.step` / `ucc28700qdbvrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc28700-q1) (40 pp, sha256 `6f5a94969d3d4d3a`, retrieved 2026-10-10, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ucc28700qdbvrq1-datasheet.pdf)