component
UCC28632DR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+43@@ -0,0 +1,43 @@+# UCC28632DR++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-7++UCC28632DR from Texas Instruments, in a SOIC-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VSENSE | input | Sense pin for transformer bias winding providing output feedback regulation, over-voltage protection (OVP) at 120% of regulation level, and input voltage sensing for under-voltage protection. |+| 2 | SD | input | Latching fault shutdown input pin with internal pull-up current source (185-235 µA); may be connected to external NTC temperature sensor with rising trip point at 3.5 V and falling trip point at 2.0 V. |+| 3 | CS | input | Current sense input from primary-side sense resistor; peak voltage ranges from 172 mV at minimum demand to 800 mV at maximum demand with 30 mV/µs slope compensation. |+| 4 | GND | power_in | Ground reference connection for all signals. |+| 5 | DRV | output | Gate drive output for external flyback MOSFET with 1-A source and 2-A sink current capability; output impedance is 22-35 Ω (high) and 1.2-2.5 Ω (low). |+| 6 | VDD | power_in | Bias supply input pin decoupled with 1-µF ceramic bypass capacitor; requires 13.0-16.5 V for start-up and maintains minimum operating voltage of 7.3-8.5 V after start-up with over-voltage protection at 16.5-18.3 V. |+| 8 | HV | power_in | High-voltage input connection for internal start-up current source; accepts up to 700 V from AC or DC supply with external 180-220 kΩ current-limiting resistor; supplies start-up current and bias power during fault conditions. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-7 |+| Category | Power Management (PMIC) |+| Pins | 7 |++## CAD (KiCad official)++- Symbol: `UCC28632DR`+- Footprint: `Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-7 (KiCad packages3D, STEP)+- 3D model files: `ucc28632dr-etched.step` / `ucc28632dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc28632dr.step` / `ucc28632dr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc28632.pdf) (86 pp, sha256 `ed73cdcfa09610b8`, retrieved 2026-10-06, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc28632dr-datasheet.pdf)
page.jsonadded+152@@ -0,0 +1,152 @@+{+ "slug": "ucc28632dr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "ucc28632dr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ucc28632dr.kicad_sym",+ "ucc28632dr.kicad_mod",+ "ucc28632dr.glb",+ "ucc28632dr.step",+ "ucc28632dr.lbr",+ "docs/hero.png",+ "docs/ucc28632dr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ucc28632dr-hero.glb",+ "ucc28632dr-hero.overlay.json"+ ],+ "component": {+ "mpn": "UCC28632DR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-7",+ "pin_count": 7,+ "category": "Power Management (PMIC)",+ "subcategory": "AC-DC Controllers And Regulators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28632.pdf",+ "parts": {+ "symbol": "ucc28632dr.kicad_sym",+ "footprint": "ucc28632dr.kicad_mod",+ "model_3d": "ucc28632dr-hero.glb",+ "model_3d_plain": "ucc28632dr.glb",+ "model_3d_step": "ucc28632dr-etched.step",+ "model_3d_step_plain": "ucc28632dr.step",+ "lbr": "ucc28632dr.lbr"+ },+ "distributor_links": {+ "lcsc": 2861145,+ "digikey": "UCC28632DR-ND",+ "mouser": "595-UCC28632DR"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T00:32:29Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "UCC28632DR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-UCC28632DR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VSENSE",+ "type": "input",+ "description": "Sense pin for transformer bias winding providing output feedback regulation, over-voltage protection (OVP) at 120% of regulation level, and input voltage sensing for under-voltage protection."+ },+ {+ "number": "2",+ "name": "SD",+ "type": "input",+ "description": "Latching fault shutdown input pin with internal pull-up current source (185-235 µA); may be connected to external NTC temperature sensor with rising trip point at 3.5 V and falling trip point at 2.0 V."+ },+ {+ "number": "3",+ "name": "CS",+ "type": "input",+ "description": "Current sense input from primary-side sense resistor; peak voltage ranges from 172 mV at minimum demand to 800 mV at maximum demand with 30 mV/µs slope compensation."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference connection for all signals."+ },+ {+ "number": "5",+ "name": "DRV",+ "type": "output",+ "description": "Gate drive output for external flyback MOSFET with 1-A source and 2-A sink current capability; output impedance is 22-35 Ω (high) and 1.2-2.5 Ω (low)."+ },+ {+ "number": "6",+ "name": "VDD",+ "type": "power_in",+ "description": "Bias supply input pin decoupled with 1-µF ceramic bypass capacitor; requires 13.0-16.5 V for start-up and maintains minimum operating voltage of 7.3-8.5 V after start-up with over-voltage protection at 16.5-18.3 V."+ },+ {+ "number": "8",+ "name": "HV",+ "type": "power_in",+ "description": "High-voltage input connection for internal start-up current source; accepts up to 700 V from AC or DC supply with external 180-220 kΩ current-limiting resistor; supplies start-up current and bias power during fault conditions."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 19,+ "cost_usd": 0.1534,+ "at": "2026-10-06T00:32:16"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/ucc28632.pdf",+ "pages": 86,+ "sha256": "ed73cdcfa09610b8",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 7,+ "described": 7,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}