component
UCC28632DR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC28632DR
Texas Instruments · AC-DC Controllers And Regulators · SOIC-7
UCC28632DR from Texas Instruments, in a SOIC-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSENSE | input | Sense pin for transformer bias winding providing output feedback regulation, over-voltage protection (OVP) at 120% of regulation level, and input voltage sensing for under-voltage protection. |
| 2 | SD | input | Latching fault shutdown input pin with internal pull-up current source (185-235 µA); may be connected to external NTC temperature sensor with rising trip point at 3.5 V and falling trip point at 2.0 V. |
| 3 | CS | input | Current sense input from primary-side sense resistor; peak voltage ranges from 172 mV at minimum demand to 800 mV at maximum demand with 30 mV/µs slope compensation. |
| 4 | GND | power_in | Ground reference connection for all signals. |
| 5 | DRV | output | Gate drive output for external flyback MOSFET with 1-A source and 2-A sink current capability; output impedance is 22-35 Ω (high) and 1.2-2.5 Ω (low). |
| 6 | VDD | power_in | Bias supply input pin decoupled with 1-µF ceramic bypass capacitor; requires 13.0-16.5 V for start-up and maintains minimum operating voltage of 7.3-8.5 V after start-up with over-voltage protection at 16.5-18.3 V. |
| 8 | HV | power_in | High-voltage input connection for internal start-up current source; accepts up to 700 V from AC or DC supply with external 180-220 kΩ current-limiting resistor; supplies start-up current and bias power during fault conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-7 |
| Category | Power Management (PMIC) |
| Pins | 7 |
CAD (KiCad official)
- Symbol:
UCC28632DR - Footprint:
Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm - 3D model: SOIC-7 (KiCad packages3D, STEP)
- 3D model files:
ucc28632dr-etched.step/ucc28632dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc28632dr.step/ucc28632dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (86 pp, sha256
ed73cdcfa09610b8, retrieved 2026-10-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).