main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ucc28220dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ucc28220dr: viewers · Ray
package.json ucc28220dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ucc28220dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/ucc28220dr · Ray
ucc28220dr-etched.fit.json ucc28220dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28220dr-etched.glb ucc28220dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28220dr-etched.step ucc28220dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28220dr.glb Publish 0.1.0 · Ray
ucc28220dr.kicad_mod Publish 0.1.0 · Ray
ucc28220dr.kicad_sym Publish 0.1.0 · Ray
ucc28220dr.lbr Publish 0.1.0 · Ray
ucc28220dr.step Publish 0.1.0 · Ray

UCC28220DR

Texas Instruments · DC-DC Converters · SOIC-16

UCC28220DR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LINEOV input Input for line over-voltage comparator; typical threshold is 1.26 V.
2 LINEHYS input Line comparator hysteresis control pin; sets hysteresis values for both over and under-voltage line detectors.
3 VDD power_in Device supply input; operating voltage range 8.4 V to 14.5 V with UVLO start threshold of 10 V.
4 CS1 input Channel 1 current sense input; linear operating range 0 V to 1.5 V with 0.5 V internal level shift.
5 SLOPE input Slope compensation setting pin; resistor to ground sets ramp current internally divided by 25 and applied to 10-pF capacitor.
6 CS2 input Channel 2 current sense input; linear operating range 0 V to 1.5 V with 0.5 V internal level shift.
7 SS input Soft-start input; capacitor to ground sets soft-start time with source and sink current equal to 3/7th of oscillator charge current.
8 CTRL input Feedback control input; maximum control voltage for duty cycle control with 0.5 V to 1.8 V range at 0% duty cycle.
9 DISCHG input Oscillator discharge current setting pin; resistor to ground sets discharge current for oscillator frequency and maximum duty cycle setup.
10 CHG input Oscillator charge current setting pin; resistor to ground sets charge current for oscillator frequency and maximum duty cycle setup.
11 GND power_in Device ground; common reference for all signals.
12 OUT2 output PWM output from channel 2; output swings between GND and REF with approximately 33 mA drive capability and 100 Ω output impedance.
13 OUT1 output PWM output from channel 1; output swings between GND and REF with approximately 33 mA drive capability and 100 Ω output impedance.
14 REF power_out Reference voltage output; 3.3 V output (3.15 V to 3.45 V typical) protected from accidental shorts to ground.
15 LINEUV input Input for line under-voltage comparator; typical threshold is 1.26 V.
16 N/C unconnected No connection; this pin is not used on UCC28220 which does not include the JFET option.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16
Category Power Management (PMIC)
Pins 16

CAD (KiCad official)

  • Symbol: UCC28220DR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: ucc28220dr-etched.step / ucc28220dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28220dr.step / ucc28220dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 9dff4a5c54fcd0b2, retrieved 2026-09-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF