UCC2818MDREP

{
  "schema_version": 1,
  "type": "component",
  "slug": "ucc2818mdrep",
  "title": "UCC2818MDREP",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc2818mdrep",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UCC2818MDREP",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc2818-ep",
    "parts": {
      "symbol": "ucc2818mdrep.kicad_sym",
      "footprint": "ucc2818mdrep.kicad_mod",
      "model_3d": "ucc2818mdrep-hero.glb",
      "model_3d_plain": "ucc2818mdrep.glb",
      "model_3d_step": "ucc2818mdrep-etched.step",
      "model_3d_step_plain": "ucc2818mdrep.step",
      "lbr": "ucc2818mdrep.lbr"
    },
    "distributor_links": {
      "lcsc": "C2866927",
      "digikey": "296-24685-2-ND",
      "mouser": "595-UCC2818MDREP"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T22:41:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-24685-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-UCC2818MDREP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all voltages; VCC and VREF should be bypassed directly to GND with a 0.1-µF or larger ceramic capacitor."
      },
      {
        "number": "2",
        "name": "PKLMT",
        "type": "input",
        "description": "PFC peak current limit threshold is 0 V, reached when the level-shifted input falls below 0 V; absolute maximum input is 5 V and the maximum negative voltage is -0.5 V."
      },
      {
        "number": "3",
        "name": "CAOUT",
        "type": "output",
        "description": "Current amplifier output that commands the PFC PWM duty cycle, with compensation components placed between CAOUT and MOUT."
      },
      {
        "number": "4",
        "name": "CAI",
        "type": "input",
        "description": "Current amplifier noninverting input, connected through a resistor to the GND side of the current sense resistor; it remains functional down to and below GND."
      },
      {
        "number": "5",
        "name": "MOUT",
        "type": "input",
        "description": "Multiplier output and current amplifier inverting input, high impedance, with multiplier output current limited to 2 × IIAC; absolute maximum input voltage is 8 V and maximum negative voltage is -0.5 V."
      },
      {
        "number": "6",
        "name": "IAC",
        "type": "input",
        "description": "Input current proportional to instantaneous line voltage for the analog multiplier; recommended maximum IIAC is 500 µA and absolute maximum input current is 10 mA."
      },
      {
        "number": "7",
        "name": "VAOUT",
        "type": "output",
        "description": "Voltage amplifier output that regulates output voltage, internally limited to approximately 5.5 V to prevent overshoot."
      },
      {
        "number": "8",
        "name": "VFF",
        "type": "passive",
        "description": "Feed-forward voltage generated by mirroring one half of IIAC into a single-pole external filter; it should be 1.4 V at low line."
      },
      {
        "number": "9",
        "name": "VREF",
        "type": "power_out",
        "description": "Accurate 7.5-V voltage reference output capable of delivering 20 mA to peripheral circuitry, short-circuit current limited, and held at 0 V when VCC is below UVLO; bypass with 0.1 µF or larger ceramic capacitor."
      },
      {
        "number": "10",
        "name": "OVP/EN",
        "type": "input",
        "description": "Over-voltage/enable window comparator input that disables the output driver above the programmed level and disables the driver and resets SS below 1.9 V (typ); absolute maximum voltage is 10 V."
      },
      {
        "number": "11",
        "name": "VSENSE",
        "type": "input",
        "description": "Voltage amplifier inverting input, connected to the compensation network and to the boost output through a divider; absolute maximum input voltage is 10 V."
      },
      {
        "number": "12",
        "name": "RT",
        "type": "passive",
        "description": "Oscillator charging current programming resistor to GND, with 10 kΩ to 100 kΩ recommended and nominal voltage on the pin of 3 V; absolute maximum input current is 10 mA."
      },
      {
        "number": "13",
        "name": "SS",
        "type": "bidirectional",
        "description": "Soft-start pin that an external capacitor is charged through a current source, used as the voltage error signal during start-up, and discharged quickly when VCC drops out."
      },
      {
        "number": "14",
        "name": "CT",
        "type": "passive",
        "description": "Oscillator timing capacitor to GND that sets the PWM oscillator frequency, with its lead to GND kept as short and direct as possible."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, connected to a stable source of at least 20 mA between 10 V and 17 V for normal operation, with absolute maximum supply voltage of 18 V; output devices are inhibited unless VCC exceeds the upper UVLO threshold."
      },
      {
        "number": "16",
        "name": "DRVOUT",
        "type": "output",
        "description": "Totem-pole MOSFET gate driver output for the boost switch, which should use a series gate resistor; absolute maximum continuous gate drive current is 0.2 A."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The extracted text lists pin names in a scrambled order (right-column names appear bottom-up), so pi; The datasheet covers the UCC2817-EP/UCC2818-EP family and the D package is shared; the MPN UCC2818MD; The schema has no field for headline electrical specs, so the specs were not extracted; the pin desc"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0592,
        "at": "2026-10-07T22:41:34"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ucc2818-ep",
        "pages": 23,
        "sha256": "0b1b2e5d62669f10",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc2818mdrep.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc2818mdrep-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f6ba8c6ab5366904cedd9cf2ac8bc887de05d92de9abc5c639566d4cccaa95c7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-16",
      "Category": "Power Management (PMIC)",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ucc2818mdrep"
  ],
  "discovery_pitch": "UCC2818MDREP (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc2818mdrep.kicad_sym",
    "ucc2818mdrep.kicad_mod",
    "ucc2818mdrep.glb",
    "ucc2818mdrep.step",
    "ucc2818mdrep.lbr",
    "docs/hero.png",
    "docs/ucc2818mdrep-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc2818mdrep-hero.glb",
    "ucc2818mdrep-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}