← Commit history

Initial commit: component/ucc2813dtr-5

Ray ·57adf081a0 ·
2 files changed +200
README.mdadded+45
@@ -0,0 +1,45 @@+# UCC2813DTR-5++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8++UCC2813DTR-5 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error amplifier output and PWM comparator input; feedback compensation network connected between COMP and FB pins; can source up to 2.5mA or sink up to 0.5mA with internal current limiting for zero duty cycle. |+| 2 | FB | input | Inverting input of error amplifier; minimize lead length and stray capacitance for stability; provides feedback signal with high open-loop voltage gain of 60-80dB and 2MHz gain-bandwidth product. |+| 3 | CS | input | Input to current sense and overcurrent comparators with 100ns leading edge blanking; accepts 0.9-1.1V peak signal at 1.65V/V typical gain; -200 to +200nA input bias current. |+| 4 | RC | input | Oscillator timing programming pin; external RC network between REF and RC sets switching frequency up to 1MHz and maximum duty cycle; recommended timing resistance 10kΩ to 200kΩ and capacitance 100pF to 1000pF. |+| 5 | GND | power_in | Reference ground and power ground for all device functions; provides return path for signal and high current gate driver circuits; separate return paths recommended to minimize signal noise. |+| 6 | OUT | output | High current MOSFET gate driver output capable of ±750mA to ±1A peak current with 41-70ns rise time and 44-75ns fall time; actively held low when VCC below UVLO threshold; internal Zener clamps to VCC, no external protection diode required. |+| 7 | VCC | power_in | Bias power supply input through external current-limiting resistor from low-impedance source; internal Zener regulator limits voltage to 12-15V absolute maximum with 13.5V typical clamp; requires 0.1µF to 1µF ceramic bypass capacitor to GND. |+| 8 | REF | power_out | Precision voltage reference output 4V ±1.5% at 25°C for UCC2813-5 model; provides bias and threshold setting for error amplifier and internal comparators; can supply up to 5mA output current; pulled low through 5kΩ internal resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC2813DTR-5`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `ucc2813dtr-5-etched.step` / `ucc2813dtr-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc2813dtr-5.step` / `ucc2813dtr-5.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc3813-0) (53 pp, sha256 `e691a7fcf4f2163a`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc2813dtr-5-datasheet.pdf)
page.jsonadded+155
@@ -0,0 +1,155 @@+{+  "slug": "ucc2813dtr-5",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc2813dtr-5",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc2813dtr-5.kicad_sym",+    "ucc2813dtr-5.kicad_mod",+    "ucc2813dtr-5.glb",+    "ucc2813dtr-5.step",+    "ucc2813dtr-5.lbr",+    "docs/hero.png",+    "docs/ucc2813dtr-5-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC2813DTR-5",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc3813-0",+    "parts": {+      "symbol": "ucc2813dtr-5.kicad_sym",+      "footprint": "ucc2813dtr-5.kicad_mod",+      "model_3d": "ucc2813dtr-5-etched.glb",+      "model_3d_plain": "ucc2813dtr-5.glb",+      "model_3d_step": "ucc2813dtr-5-etched.step",+      "model_3d_step_plain": "ucc2813dtr-5.step",+      "lbr": "ucc2813dtr-5.lbr"+    },+    "distributor_links": {+      "lcsc": "C702422",+      "digikey": "296-41804-2-ND",+      "mouser": "595-UCC2813DTR-5"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T01:51:38Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-41804-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-UCC2813DTR-5",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output and PWM comparator input; feedback compensation network connected between COMP and FB pins; can source up to 2.5mA or sink up to 0.5mA with internal current limiting for zero duty cycle."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Inverting input of error amplifier; minimize lead length and stray capacitance for stability; provides feedback signal with high open-loop voltage gain of 60-80dB and 2MHz gain-bandwidth product."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "Input to current sense and overcurrent comparators with 100ns leading edge blanking; accepts 0.9-1.1V peak signal at 1.65V/V typical gain; -200 to +200nA input bias current."+      },+      {+        "number": "4",+        "name": "RC",+        "type": "input",+        "description": "Oscillator timing programming pin; external RC network between REF and RC sets switching frequency up to 1MHz and maximum duty cycle; recommended timing resistance 10kΩ to 200kΩ and capacitance 100pF to 1000pF."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Reference ground and power ground for all device functions; provides return path for signal and high current gate driver circuits; separate return paths recommended to minimize signal noise."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "High current MOSFET gate driver output capable of ±750mA to ±1A peak current with 41-70ns rise time and 44-75ns fall time; actively held low when VCC below UVLO threshold; internal Zener clamps to VCC, no external protection diode required."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_in",+        "description": "Bias power supply input through external current-limiting resistor from low-impedance source; internal Zener regulator limits voltage to 12-15V absolute maximum with 13.5V typical clamp; requires 0.1µF to 1µF ceramic bypass capacitor to GND."+      },+      {+        "number": "8",+        "name": "REF",+        "type": "power_out",+        "description": "Precision voltage reference output 4V ±1.5% at 25°C for UCC2813-5 model; provides bias and threshold setting for error amplifier and internal comparators; can supply up to 5mA output current; pulled low through 5kΩ internal resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 37,+        "cost_usd": 0.293,+        "at": "2026-10-01T01:51:22"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ucc3813-0",+        "pages": 53,+        "sha256": "e691a7fcf4f2163a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file