component
UCC2813DTR-5
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -70,7 +70,7 @@ "number": "4", "name": "RC", "type": "input",- "description": "Oscillator timing programming pin; external RC network between REF and RC sets switching frequency up to 1MHz and maximum duty cycle; recommended timing resistance 10k\u03a9 to 200k\u03a9 and capacitance 100pF to 1000pF."+ "description": "Oscillator timing programming pin; external RC network between REF and RC sets switching frequency up to 1MHz and maximum duty cycle; recommended timing resistance 10kΩ to 200kΩ and capacitance 100pF to 1000pF." }, { "number": "5",@@ -82,19 +82,19 @@ "number": "6", "name": "OUT", "type": "output",- "description": "High current MOSFET gate driver output capable of \u00b1750mA to \u00b11A peak current with 41-70ns rise time and 44-75ns fall time; actively held low when VCC below UVLO threshold; internal Zener clamps to VCC, no external protection diode required."+ "description": "High current MOSFET gate driver output capable of ±750mA to ±1A peak current with 41-70ns rise time and 44-75ns fall time; actively held low when VCC below UVLO threshold; internal Zener clamps to VCC, no external protection diode required." }, { "number": "7", "name": "VCC", "type": "power_in",- "description": "Bias power supply input through external current-limiting resistor from low-impedance source; internal Zener regulator limits voltage to 12-15V absolute maximum with 13.5V typical clamp; requires 0.1\u00b5F to 1\u00b5F ceramic bypass capacitor to GND."+ "description": "Bias power supply input through external current-limiting resistor from low-impedance source; internal Zener regulator limits voltage to 12-15V absolute maximum with 13.5V typical clamp; requires 0.1µF to 1µF ceramic bypass capacitor to GND." }, { "number": "8", "name": "REF", "type": "power_out",- "description": "Precision voltage reference output 4V \u00b11.5% at 25\u00b0C for UCC2813-5 model; provides bias and threshold setting for error amplifier and internal comparators; can supply up to 5mA output current; pulled low through 5k\u03a9 internal resistor during UVLO; requires 0.1\u00b5F minimum ceramic bypass capacitor."+ "description": "Precision voltage reference output 4V ±1.5% at 25°C for UCC2813-5 model; provides bias and threshold setting for error amplifier and internal comparators; can supply up to 5mA output current; pulled low through 5kΩ internal resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor." } ], "provenance": {@@ -172,5 +172,8 @@ "docs/ucc2813dtr-5-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }