component
UCC2808D-2
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 28d ago |
| viewers | 28d ago |
| package.json | 28d ago |
| page.json | 28d ago |
| README.md | 28d ago |
| ucc2808d-2-etched.glb | 28d ago |
| ucc2808d-2-etched.step | 28d ago |
| ucc2808d-2-hero.glb | 28d ago |
| ucc2808d-2-hero.overlay.json | 28d ago |
| ucc2808d-2.glb | 28d ago |
| ucc2808d-2.kicad_mod | 28d ago |
| ucc2808d-2.kicad_sym | 28d ago |
| ucc2808d-2.lbr | 28d ago |
| ucc2808d-2.step | 28d ago |
UCC2808D-2
Texas Instruments · AC-DC Controllers And Regulators · SOIC-8
UCC2808D-2 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | bidirectional | Output of the error amplifier and input of the PWM comparator; the error amplifier is internally current limited so zero duty cycle can be forced by pulling COMP to GND, and soft-start clamps the maximum COMP voltage. |
| 2 | FB | input | Inverting input to the error amplifier, with the lead length and stray capacitance kept small for best stability; analog input limit is -0.3 V to VDD + 0.3 V. |
| 3 | CS | input | Input to the PWM, peak current, and overcurrent comparators, where exceeding the 0.7 V to 0.8 V overcurrent threshold causes a soft-start cycle; analog input limit is -0.3 V to VDD + 0.3 V. |
| 4 | RC | input | Oscillator programming pin, with a timing resistor between 10 kΩ and 200 kΩ (avoid resistors below 10 kΩ) and a timing capacitor between 100 pF and 1000 pF. |
| 5 | GND | power_in | Reference ground and power ground for all functions, which should be connected to a low-impedance ground plane. |
| 6 | OUTB | output | Alternating high current output stage, capable of 500 mA peak source current and 1 A peak sink current, switching at half the oscillator frequency in push-pull with OUTA. |
| 7 | OUTA | output | Alternating high current output stage, capable of 500 mA peak source current and 1 A peak sink current, switching at half the oscillator frequency in push-pull with OUTB. |
| 8 | VDD | power_in | Power input for the device; the recommended supply for the UCCx808-2 is 5 V to 14 V, with an absolute maximum of 15 V at IDD of 10 mA or less, and a 1 µF decoupling capacitor is recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC2808D-2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc2808d-2-etched.step/ucc2808d-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc2808d-2.step/ucc2808d-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
a5c633f933a10add, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).