component
UCC28083DR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC28083DR
Texas Instruments · AC-DC Controllers And Regulators · SOIC-8
UCC28083DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTRL | input | Error voltage input to the PWM comparator, with an internal divider ratio of 0.45 and absolute limits of -0.3 V to VDD + 0.3 V. |
| 2 | ISET | input | Slope-compensation current select: a resistor RSET from ISET to ground sets the ramp, with RSET required to be greater than 5 kΩ. |
| 3 | CS | input | Current-sense input to the PWM comparator, cycle-by-cycle current limit and overcurrent comparator, with an overcurrent threshold of 0.70 to 0.80 V and absolute limits of -0.3 V to VDD + 0.3 V, not to exceed 6 V. |
| 4 | RT | input | Oscillator programming pin: an external resistor to GND sets the oscillator frequency, with a recommended resistor range of 25 kΩ to 698 kΩ and RT voltage limits of -0.3 V to 2.0 V. |
| 5 | GND | power_in | Reference and power ground for all functions; a low-impedance ground plane is highly recommended due to high currents and high-frequency operation. |
| 6 | OUTB | output | Alternating high-current push-pull output stage capable of 500 mA peak source and 1 A peak sink to drive a power MOSFET gate. |
| 7 | OUTA | output | Alternating high-current push-pull output stage capable of 500 mA peak source and 1 A peak sink to drive a power MOSFET gate. |
| 8 | VDD | power_in | Power input with a supply voltage rating of 15 V maximum (IDD < 10 mA) and a 20 mA maximum supply current; bypass to GND with a 1-µF decoupling capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC28083DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc28083dr-etched.step/ucc28083dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc28083dr.step/ucc28083dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
19bab60962d5c6f5, retrieved 2026-10-08, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).